Abstract
Austenitic stainless steels are used for industrial applications due to their improved corrosion resistance properties. Their poor tribological behaviour is a barrier for their wider application under corrosion–wear conditions taking place between rolling and sliding contacts. The present work has been conducted to develop a low temperature liquid nitriding process for austenitic stainless steel claddings to impart better resistance to corrosion–wear. This work presents the results of the corrosion and wear tests performed on liquid nitrided AISI 316L stainless steel claddings. The wear tests were conducted with a Ducom pin on disc machine under rolling–sliding conditions. Surface and subsurface were studied by an optical microscope. The hardness and depth of the modified layer were measured in the sectioned samples using a microhardness tester. The optical metallographic microstructures of the liquid nitrided specimens were revealed using Marbles reagent. The electrochemical behaviour of the liquid nitrided specimens was investigated with a dc anodic potentiodynamic polarisation technique.
Get full access to this article
View all access options for this article.