Replacement of hard chromium plating by thermal spraying – problems,solutions and possible future approaches

Grainger S. and Blunt J. : ‘Engineering coatings — design and application’, 2nd edn, 167–193; 1998, Abington, UK, Woodhead Publishing.

Edwards J. : ‘Coating and surface treatment systems for metals’, 72–81; Stevenage, UK, Finishing Publications.

US Department of Labor, Occupational Safety & Health Administration, Regulation 1910.1026.

Sartwell B. D. , Legg K. O. , Shell J. , Sauer J. , Natishan P. , Dull D. , Falkowski P. , Bretz P. , Devereaux J. , Edwards C. and Parker D. : ‘Validation of WC/Co HVOF thermal spray coatings as a replacement for hard chrome plating on aircraft landing gear’, US Naval Research Laboratory report, 31 March 2004.

Legg K. and Sauer J. : ‘Use of thermal spray as an aerospace chrome plating alternative’, Final Report — Rowan Project 3105J5F3, Rowan Technology Group, Libertyville, IL, USA, 2000.

Sartwell B. D. , Legg K. O. , Zimmermann J. , Reynolds M. , Gribble J. , Magno J. , Mason R. and Kaltenhauser A. : ‘Validation of HVOF thermal spray coatings as a replacement for hard chrome plating on hydraulic/pneumatic actuators’, US Department of Defense Environmental Security Technology Certification Program (ESTCP) Final Report, 27 July 2006.

Legg K. O. , Graham M. , Chang P. , Rastegar F. , Gonzales A. and Sartwell B. : Surf. Coat. Technol, 1996, 81, 99–105.

Herman H. , Sampath S. and McCune R. : MRS Bull., 2000, 25, (7), 17–25.

Evans B. , Panza-Giosa R. , Cochien-Brikaras E. and Maitland S. : Proc. Int. Thermal Spray Conf. 2006, Seattle, WA, USA, May 2006, ASM International, Paper S7-2.

Wank A. , Wielage B. , Pokhmurska H. , Friesen E. and Reisel G. : Surf. Coat. Technol, 2006, 201, 1975–1980.

BoleIli G. , Cannillo V. , Lusvarghi L. and Ricce S. : Surf. Coat. Technol, 2006, 200, 2995–3009.

Wheeler D.W. and Wood R.J.K. : Wear, 2005, 258, 526–536

Yang Q. , Senda T. and Ohmori A. : Wear, 2003, 254, 23–34.

Vicenzi J. , Villanova D. L. , Lima M. D. , Takimi A. S. , Marques C. M. and Bergmann C. P. : Mater. Des., 2006, 27, 236–242.

Guilemany J.M. , Espallargas N. , Suegama P.H. , Benedetti A.V. and Fernández J. : J. Therm. Spray Technol, 2005, 14, 335–341.

Nascimento M. P. , Souza R. C. , Miguel I. M. , Pigatin W. L. and Voorwald H. J. C. : Surf. Coat. Technol, 2001, 138, 113–124.

Villalobos-Gutiérrez C. J. , Gedler-Chacon G. E. , La Barbera-Sosa J. G. , Pilieiro A. , Staia M. H. , Lesage J. , Chicot D. , Mesmacque G. and Puchi-Cabrera E. S. : Surf. Coat. Technol, 2008, 202, 4572–4577.

Kuroda S. , Tashiro Y. , Yumoto H. , Taira S. , Fukanuma H. and lobe S. : J. Therm. Spray Technol, 2001, 10, 367–374.

Bansal P. , Shipway P.H. and Leen S.B. : J. Therm. Spray Technol, 2006, 15, 570–575.

Magnani M. , Suegama P. H. , Espallargas N. , Dosta S. , Fugivara C. S. , Guilemany J. M. and Benedetti A. V. , Surf. Coat. Technol, 2008, 202, 4746–4757.

http://www.hazmat-alternatives.com/Alttech-Chrome-Alts-thermalsprayed.php (accessed 16 September 2008).

Picas J.A. , Forn A. and Matthaus G. : Wear, 2006, 261, 477–484.

Matthaus G. , Bobzin K. , Lugscheider E. and Zwick J. : Proc. Int. Thermal Spray Conf. 2006, Seattle, WA, USA, May 2006, ASM International, Paper S7-12.

Tillmann W. , Vogli E. , Baumann I. , Matthaus G. and Ostrowski T. : in ‘Thermal spray crossing borders — proceedings of the international thermal spray conference 2008’, (ed. Lugscheider E. ), Maastricht, The Netherlands, June 2008.

Barletta M. , Rubino G. , Bolelli G. , Lusvarghi L. and Bassani A. : in ‘Thermal spray crossing borders — proceedings of the international thermal spray conference 2008’, (ed. Lugscheider E. ), Maastricht, The Netherlands, June 2008.

Marple B.R. and Lima R.S. : J. Therm. Spray Technol, 2005, 14, 67–76.

Bartuli C. , Valente T. , Cipri F. , Bemporad E. and Tului M. : J. Therm. Spray Technol, 2005, 14, 187–195.

He J. and Schoenung J. M. : Surf. Coat. Technol, 2002, 157, 72–79.

Shipway P. H. , McCartney D. G. and Sudaprasert T. : Wear, 2005, 259, 820–827.

Zimmermann S. , Gries B. and Fischer J. : in ‘Thermal spray crossing borders — proceedings of the international thermal spray conference 2008’, (ed. Lugscheider E. ), Maastricht, The Netherlands, June 2008.

Bolelli G. , Giovanardi R. , Lusvarghi L. and Manfredini T. : Corros. Sci., 2006, 48, 3375–3397.

Chidambaram D. , Clayton C. R. and Dorfman M. R. : Surf. Coat. Technol, 2004, 176, 307–317.

Bolelli G. , Lusvarghi L. and Giovanardi R. : Surf. Coat. Technol, 2008, 202, 4793–4809.

Bolelli G. , Cannillo V. , Lusvarghi L. , Montorsi M. , Pighetti Mantini F. and Barletta M. : Wear, 2007, 263, 1397–1416.

Choi H. , Yoon S. , Kim G. , Jo H. and Lee C. : Scr. Mater., 2005, 53, 125–130.

Branagan D. J. , Marshall M. C. , Meacham B. E. , Aprigliano L. F. , Bailes R. , Lemieux E. J. , Newbauer T. , Martin F. J. , Farmer J. C. , Haslam J. J. and Day S. D. : Proc. Int.Thermal Spray Conf. 2006, Seattle, WA, USA, May 2006, ASM International, Paper S8-7.

Rohan P. , Bouaricha S. , Legoux J.-G. , Moreau C. , Denoirjean A. , Vardelle A. and Le Niniven C. : Proc. Int. Thermal Spray Conf. 2005, Basel, Switzerland, May 2005, Paper: Nanostructured Materials—II #4.

Ni H. S. , Liu X. H. , Chang X. C. , Hou W. L. , Liu W. and Wang J. Q. : J. Alloys Compd., in press, doi:10.1016/ Hallcom.2007.11.133.

Branagan D. J. , Swank W. D. , Haggard D. C. and Finche J. R. : Metall Mater. Trans. A, 2001, 32, 2615–2621.

Branagan D. J. , Swank W. D. and Meacham B. E. : Metall Mater. Trans. A, in press, doi: 10.1007/s11661-008-9581-7.

Bolelli G. , Rauch J. , Cannillo V. , Killinger A. , Lusvarghi L. and Gadow R. : J. Therm. Spray Technol, in press.

Ma X. Q. , Roth J. , Gandy D. W. and Frederick G. J. : Proc. Int. Thermal Spray Conf. 2006, Seattle, WA, USA, May 2006, ASM International, Paper S8-2.

Basu S. and Cetegen B.M. : Acta Mater., 2008, 56, 2750–2759.

Oberste Berghaus J. , Legoux J.-G. , Moreau C. , Tarasi F. and Chraska T. : J. Therm. Spray Technol, 2008, 17, 91–104.

Killinger A. , Kuhn M. and Gadow R. : Surf. Coat. Technol, 2006, 201, 1922–1929.

Rauch J. , Bolelli G. , Killinger A. , Gadow R. and Cannillo V. : Proc. 2nd Int. Workshop on Solution and Suspension Thermal Spraying, Descartes College, Tours, France, June 2008.

Fauchais P. , Etchart-Salas R. , Rat V. , Coudert J. F. , Caron N. and Wittmann-Téneze K. : J. Therm. Spray Technol, 2008, 17, 31–59.

Northwest Mettech Corp .: www.mettech.com/ (accessed 5 August 2008).

Molz R. J. , McCollough R. J. and Wintergeste T. : International Thermal Spray and Surface Engineering, 2006, 1, (2), 15–17.

Meyer P. and Rusch W. : ‘Advancing the science and applying the Technology — proceedings of the international thermal spray conference 2003’, (ed. Moreau C. and Marple B. ), 123–128; 2003, Materials Park, OH, ASM International.

Montavon G. , Vardelle A. , Krishnan N. , Ulloa P. , Costil S. and Liao H. : Proc. Int. Thermal Spray Conference 2006, Seattle, WA, USA, May 2006, ASM International, Paper S17-10.

Krishnan N. , Vardelle A. and Legoux J. G. : ‘Thermal spray crossing borders — proceedings of the international thermal spray conference 2008’, (ed. Lugscheider E. ), Maastricht, The Netherlands, June 2008.

Pearson T. : Trans. Inst. Met. Finish., 2005, 83, 2–4.

North Carolina Department of Environmental and Natural Resources, Division of Pollution Prevention and Environmental Assistance : ‘High velocity oxy-fuel thermal spray’, Report 4/03.

Sahraoui T. , Fenineche N.-E. , Montavon G. and Coddet C. : J. Mater. Process. Technol, 2004, 152, 43–55.

Russo L. , ‘Safety guidelines for performing risk assessments’, Report prepared by the ASM- TSS Safety Guidelines Committee, available online at: http://tss.asminternational.org/portal/site/TSS (accessed 5 August 2008).

Gifford D.J. , Pollard L. , Wuest G. and Fletcher R. C. , ‘Thermal spray booth design guidelines’, Report prepared by the ASM-TSS Safety Committee, available online at: http://tss.asminternational.org/portal/site/TSS (accessed 5 August 2008).

Davis M. , Hurley C. , Adams N. , Jorgensen M. , Mahdavi R. , Servin T. and Negri L. , ‘Airborne toxic control measure to reduce emissions of hexavalent chromium and nickel from thermal spraying’, State of California Air Resources Board Staff Report, State of California, Stationary Source Division, Measures Assessment Branch, October 2004.

Crawmer D. : Int. Thermal Spray Surf. Eng., 2006,1, (2), 13.

van Wonderen M. : Spraytime, 2006,13, (4), 8–11.

Harju M. , Jam M. , Dahlsten P. , Nikkanen J.-P. , Rosenholm J. B. and Mantyla T. : J. Colloid Interface Sci., 2008, 326, (2), 403–410.

Matthaus G. , Brandi W. , Secosan I.-F. , Marginean G. , Chiril V. and Ackermann D. : ‘Thermal spray crossing borders — proceedings of the international thermal spray conference 2008’, (ed. Lugscheider E. ), Maastricht, The Netherlands, June 2008.

Edrisy A. , Perry T. and Alpas A. T. : Wear, 2005, 259, 1056–1062.

Legg K. : Proc. Int. Thermal Spray Conf. 2006, Seattle, WA, USA, May 2006, ASM International, Paper S16-2.