Sage Journals: Discover world-class research

Abstract

Calcium phosphate (CP) coatings on Ti6Al4V alloy were grown at controlled current densities (from 3 to 10 mA cm⁻²) during electrochemical deposition (ECD). The thickness, structure and composition of the coatings were investigated by X-ray diffraction (XRD), infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The results showed that the thickness (ranging from 3 to 16 μm) shows a parabolic increase with the applied deposition current density. The hexagonal hydroxyapatite (HA) structure was the main phase at the current density of 10 mA cm⁻² during ECD. The potential–time curves showed that the CP deposition progresses due to the initial reduction of alloy surface oxide layer, after which a reduction of nitrate ions takes place on the active free surface sites. The kinetics of this process is enhanced by sufficiently high current densities. Such current densities have a direct influence on the local pH of the solution and determine the morphology, structure and composition of ECD products.

Keywords

CALCIUM PHOSPHATE COATINGS HYDROXYAPATITE ELECTROCHEMICAL DEPOSITION TI6AL4V ALLOY

Get full access to this article

View all access options for this article.

References

Rohanizadeh

, LeGeros

R. Z.

, Harsono

and Bendavid

: J. Biomed. Mater. Res. A, 2005, 72A, 428–438.

Radin

and Decheyne

: J. Mater. Sci., 1992, 3, 33–42.

Whitehead

R. Y.

, Lacefield

W. R.

and Lucas

L. C.

: J. Biomed. Mater. Res., 1993, 27, 1501–1507.

Ducheyne

, Van Raemdonck

, Heughebaert

J. C.

and Heughebaert

: Biomaterials, 1986, 7, 97–103.

Kumar

, Dasarathy

and Riley

: J. Biomed Mater. Res., 1999, 45, 302–310.

Kumar

, Xie

, Chittur

and Riley

: Biomaterials, 1999, 20, 1389–1399.

Kannan

, Balamurugan

and Rajeswari

: Trends Biomater. Artif. Organs, 2002, 16, 8–11.

Han

, Fu

, Lu

and Xu

: J. Biomed. Mater. Res., 2001, 54, 96–101.

Shirkhanzadeh

: J. Mater. Sci. Mater. Med., 1995, 6, 90–93.

10.

Shirkhanzadeh

: J. Mater. Sci. Lett., 1991, 10, 1415–1417.

11.

Royer

and Rey

: Surf Coat. Technot, 1991, 45, 171–177.

12.

Ban

and Maruno

: Jpn J. Appl. Phys., 1993, 32, 1577–1580.

13.

Ban

and Maruno

: Biomaterials, 1995, 16, 977–981.

14.

Redepenning

, Schlessinger

, Burnham

, Lippiello

and Miyano

: J. Biomed. Mater. Res., 1996, 30, 287–294.

15.

Redepenning

and McIsaac

J. P.

: Chem. Mater., 1990,2, 625–627.

16.

Zhitomirsky

: JOM, 2000, 52, 1–11.

17.

Eliaz

, Sridhar

T. M.

, Mudali

U. K.

and Raj

: Surf Eng., 2005, 21, 238–242.

18.

Butler

J. N.

: ‘Ionic equilibrium, a mathematical approach’, 206–260; 1964, Reading, MA, Addison Wesley.

19.

H. L.

, Chambers

J. Q.

and Hobbs

D. T.

: J. Appl. Electrochem., 1988, 18, 454–458.

20.

Horany

and Rizmayer

E. M.

: J. Electroanat Chem. Interf Electrochem., 1985, 188, 265–272.

21.

‘Mineral powder diffraction file’, JCPDS International Centre for Diffraction Data, Swarthmore, PA, USA, 1986.

22.

Gross

K. A.

, Gross

and Berndt

C. C.

: J. Am. Ceram. Soc., 1998, 81, 106–112.

23.

Calderin

, Stott

M. J.

and Rubio

: Phys. Rev. B, 2003, 67B, 1–7.

24.

Zhang

J. M.

, Lin

C. J.

, Feng

Z. D.

and Tian

Z. W.

: J. Electroanat Chem. Interf Electrochem., 1998, 452, 235–240.

25.

Ban

and Maruno

: Jpn J. Appl. Phys. A, 1994, 11A, 1545–1548.

26.

Graham

and Brown

P. W.

: J. Cryst. Growth, 1993, 132,215–225.

27.

Brown

P. W.

, Hocker

and Hoyle

: J. Am. Ceram Soc., 1991, 74, 1848–1854.

28.

Nancollas

G. H.

and Tomazic

: J. Phys. Chem., 1974, 78, 2218–2222.

29.

Koutsoukos

, Amjad

, Tomson

M. B.

and Nancollas

G. H.

: J. Am. Chem. Soc., 1980, 102, 1553–1557.

30.

Nie

, Leyland

, Matthews

, Jiang

J. C.

and Meletis

E. I.

: J. Biomed. Mater. Res., 2001, 57, 612–618.

Electrochemical assisted deposition of calcium phosphate coatings for orthopaedic applications

Abstract

Keywords

Get full access to this article

References