Surface modification of martensitic stainless steels by laser marking and its consequences regarding corrosion resistance

Abstract

Marking is of prime importance in the field of biomaterials to allow the identification of surgical tools or implants. Markings are obtained under industrial conditions with a pulsed Nd:YAG laser on a X30C13 martensitic stainless steel. Depending on laser parameters, two modes of marking are considered: a surface oxidisation mode and a matter photoablation mode. Electrochemical behaviour, i.e. passive state, corrosion rate, resistance to pitting, is evaluated in Ringer's saline solution. Results are then explained on the basis of metallurgical modifications regarding the phases composition and the distribution of alloying elements. In oxidative regime, laser treatment drastically affects both microstructure and chemical composition. Specially, chromium depletion is measured in subsurface, leading to a loss of passive ability. In ablative mode the surface is transformed into a thin favourable layer of austenite. Moreover, the overall chromium distribution is little modified. Therefore, the passive character is maintained, but with nevertheless a shorter passive domain than base material one.

Keywords

SURFACE TREATMENTS LASER CORROSION STAINLESS STEELS MARKING

Get full access to this article

View all access options for this article.

References

Colaço

and Vilar

: Mater. Set Eng. A, 2004, 385A, 123–127.

Harzic

R. L.

, Huot

, Audouard

, Jonin

, Laporte

, Valette

, Fraczkiewicz

and Fortunier

: AppL Phys. Lett., 2002, 80, 3886–3888.

Roman

: Surf Eng., 2004, 20, 304–308.

Goswami

G. L.

, Kumar

, Grover

A. K.

, Pappachan

A. L.

and Totlani

M. K.

: Surf Eng., 1999, 15, 65–70.

Geetha

, Mudali

U. K.

, Pandey

N. D.

, Asokamani

and Raj

: Surf Eng., 2004, 20, 68–74.

Verdier

, Costil

, Coddet

, Oltra

and Perret

: AppL Surf Set, 2003, 205, 3–21.

Kumar

and Banerjee

M. K.

: Surf Eng., 2001, 17, 483–489.

Kwok

C. T.

, Lo

K. H.

, Cheng

F. T.

and Man

H. C.

: Surf Coat. Technot, 2003, 166, 221–230.

Majumdar

J. D.

and Manna

: Mater. Set Eng. A, 1999, A267, 50–59.

10.

Kwok

C. T.

, Leong

K. I.

, Cheng

F. T.

and Man

H. C.

: Mater. Set Eng. A, 2003, A357, 94–103.

11.

Conde

, Colaço

, Vilar

and de Damborenea

: Mater. Design, 2000, 21, 441–445.

12.

Conde

, Garcia

and de Damborenea

J. J.

: Corros. Set, 2001, 43, 817–828.

13.

Peyre

, Scherpereel

, Berthe

, Carboni

, Fabbro

, & ranger

and Lemaitre

: Mater. Sci. Eng. A, 2000, A280, 294–302.

14.

Oksa

, Turunen

and Vans

: Surf Eng., 2004, 20, 251–254.

15.

Colaço

and Vilar

: Mater. Sci. Eng. A, 2004, A385, 123–127.

16.

Carboni

, Peyre

, Béranger

and Lemaitre

: J. Mater. Sci., 2002, 37, 3715–3723.

17.

Noor

Y. M.

, Tam

S. C.

, Lim

L. E. N.

and Jana

: J. Mater. Process. Technot, 1994, 42, 95–133.

18.

Dumont

, Lippert

, Wokaun

and Leyvraz

: Thin Solid Films, 2004, 453-454, 42–45.

19.

, Wang

K. L.

and Zhu

Y. M.

: J. Mater. Process. TechnoL, 2003, 139, 273–276.

20.

Domingues

S. R.

, Proenca

M. B.

, Ierardi

M. C. F.

and Freire

C. M. A.

: Braz. J. Chem. Eng., 1996, 13, 210–218.

21.

Colaço

and Vilar

: Ser. Mater., 1997, 36, 199–205.

22.

Colaço

and Vilar

: Surface Engineering, 1996, 12, 319–325.

23.

de Araujo

, Steyer

, Millet

J.-P.

, Damond

, Stauder

and Jacquot

: Surf Eng., 2003, 19, 304–309.

24.

Steyer

, Millet

J.-P.

, Anderbouhr

and Jacquot

: Surf Eng., 2001, 17, 327–331.

25.

Thaiwatthana

, Li

X. Y.

, Dong

and Bell

: Surf Eng., 2003, 19, 211–216.

26.

Lacombe

, Baroux

and Béranger

: in ‘Stainless steels’: 1990, Les Ulis, France, Les Editions de Physique.

27.

Kwok

C. T.

, Man

H. C.

and Cheng

F. T.

: Surf Coat. Technot, 2000, 126, 238–255.

28.

K. H.

, Cheng

F. T.

, Kwok

C. T.

and Man

H. C.

: Mater. Lett., 2003, 58, 88–93.