This paper presents an overview of resistance spot welding control. The presentation of the physical background of the resistance welding process is followed by the description of the main problems concerning the appurtenant control theory. Solutions to these problems are presented primarily according to the measured signals used and to the type of control strategies.
AidunD. K. and BennettR. W.: Weld. J., 1985, 12, 15–25.
10.
BrownB. M.: Weld. J., 1987, 1, 18–23.
11.
DickinsonD. W., FranklinJ. E. and StanyaA.: Weld. J., 1980, 6, 170s–176s.
12.
BondJ.: Weld. Rev. Int., 1991, 3, 162–163.
13.
DVS:, ‘Widerstandspreßschweißen von Stahlen bis 3 mm einzeldicke – Vorbereitung und durchführung’ (Resistance spot welding of up to 3 mm thick steel sheets – preparation and execution), DVS-Merkblatt 2902, Deutscher Verband für Schweißtechnik DVS-Verlag GmbH, Dusseldorf, Germany, 1978.
14.
WilliamsN. T. and ParkerJ. D.: Int. Mater. Rev., 2004, 2, 45–75.
15.
WilliamsN. T. and ParkerJ. D.: Int. Mater. Rev., 2004, 2, 77–108.
16.
D'AzzoJ. J. and HoupisC. H.: ‘Linear control system analysis and design: conventional and modern’, 4th edn; 1995, New York, McGraw-Hill.
17.
BroomheadJ. H. W. and DonyP. H.: Weld Met. Fabr., 1990, 6, 309–314.
18.
ToweyM. and AndrewsD. R.: Weld. Met. Fabr., 1968, 10, 383–392.
19.
GedeonS. A., SorensenC. D., UlrichK. T. and EagarT. W.: Weld. J., 1987, 12, 378–385.
20.
SavageW. F., NippesE. F. and WassellF. A.: Weld. J., 1978, 2, 43s–50s.
21.
LivshitsA. G.: Weld. J., 1997, 9, 383s–390s.
22.
PatangeS. R., AnjaneyuluT. and ReddyG. P.: Weld. J., 1985, 12, 33–38.
23.
ChoY., KimZ. and RheeS.: Proc. Inst. Mech. Eng. B, Eng. Manuf., 2001, 11B, 1529–1538.
24.
GarzaF. and DasM.: Circ. Syst., 2001, 1, 41–44.
25.
BeemerR. D. and TalbotT. W.: Weld. J., 1970, 1, 9s–13s.
26.
EichornF., SinghS., EmontsM. and LeuschenB.: Schweißen Schneiden, 1980, 12, 491–496.
27.
HaoM., OsmanK. A., BoomerD. R. and NewtonC. J.: Weld. J., 1996, 1, 1s–8s.
28.
LeeS. R., ChooY. J., LeeT. Y., KimM. H. and ChoiS. K.: J. Manuf. Syst., 2001, 5, 320–328.
29.
JanotaM.: Schweißtechnik, 1977, 9, 400–402.
30.
TaylorJ. L. and XieP.: Met. Constr., 1987, 2, 72–75.
31.
WoodR. T., BauerL. W., BedardJ. F., BernsteinB. M., CzechowskiJ., D'AndreaM. M. and HogleR. A.: Weld. J., 1985, 12, 26–30.
32.
ChoH. S. and ChunD. W.: IEEE Trans. Ind. Electron., 1985, IE-32, (3), 234–238.
33.
ChangH. S., ChoY. J., ChoiS. G. and ChoH. S.: J. Dyn. Syst., Meas. Contr., 1989, 2, 332–336.
34.
HaefnerK., CareyB., BernsteinB., OvertonK. and D'AndreaM.: J. Dyn. Syst. Meas. Contr., 1991, 1, 104–112.
35.
TsaiC. L., DaiW. L., DickinsonD. W. and PapritanJ. C.: Weld. J., 1991, 12, 339s–351s.
36.
ZhangY. S., ZhangX. Y., LaiX. M. and ChenG. L.: Sci. Technol. Weld. Join., 2007, 5, 449–454.
37.
RokhlinS. I., MayhanR. J. and AdlerL.: Mater. Eval., 1985, 7, 879–883.
38.
BlumentrittN.: Weld. World, 2002, 7, 297–307.
39.
PolajnarI.: J. Mech. Eng., 1999, 4, 147–153.
40.
GahrS. A. and PayneC. H.: West. Electr. Eng., 1979, 4, 21–29.
41.
SchwalbeH.-J. and HankeG.: Mater. Technol. Test., 1986, 7, 264–269.
SneeR. K. and TaylorJ. L.: Met. Constr. Br. Weld. J., 1972, 4, 142–148.
46.
PolrolniczakH.: ‘Zerstorungfreies prüfen, überwachen und regelen als mittel der qualitatssicherung beim widerstandspunktschweißen’ (Non-destructive testing, monitoring and control as a means of resistance spot welding quality assurance), Widerstandsschweißen: 4 Jahrzehnte Sondertagung – Rückblick und Ausblick, DVS-Berichte Band 165; 1995, Dusseldorf, DVS-Verlag GmbH.
47.
microJoining Solutions: ‘Feedback mode selection for small and miniature scale resistance welding’, available at: http://www.microjoining.com/microTips_pdf/microTip_Resistance_Feedback%20Modes.pdf
48.
NamikiM. and NishizawaK.: US patent 4792656, 1988.
49.
IshikawaS.: US patent 5523541, 1996.
50.
NamikiM.: US patent 4734556, 1988.
51.
ThierH.: ‘Ein quantitatives expertensystem zum widerstandspunktschweißen’ (Quantitative expert system for resistance spot welding), Widerstandsschweißen: 4 Jahrzehnte Sondertagung – Ruckblick und Ausblick, DVS-Berichte Band 165; 1995, Dusseldorf, DVS-Verlag GmbH.
52.
ChenX. and ArakiK.: Proc. IEEE Int. Conf. Inteil. Process. Syst., 1998, 1, 190–194.
53.
MesslerR. W., JouM. and LiC. J.: IEEE Trans. Ind. Appl., 1995, 2, 1757–1763.
54.
ZhangY. S., WangH., ChenG. L. and ZhangX. Q.: Meas. Sci Technol., 2007, 3, 867–876.
55.
OsmanK. A., HigginsonA. M., KellyH. R., NewtonC. J., BrowneD. J. and BoomerD. R.: Inteil. Eng. Syst. Artif. Neural Networks, 1994, 4, 1109–1114.
56.
BrownJ. D., RoddM. G. and WilliamsN. T.: Ironmaking Steelmaking, 1998, 3, 199–204.
57.
DiltheyU. and DickersbachJ.: ISIJ Int., 1999, 10, 1061–1066.
58.
ChoY. and RheeS.: Meas. Sci. Technol., 2000, 8, 1173–1178.
59.
ShriverJ., HuS. J. and HueiP.: Proc. 1998 ASME Int. Cong. and Exp., Anaheim, CA, USA, November 1998, ASME, 201–211.
60.
HaganM. T., DemuthH. B. and BealeM.: ‘Neural network design’; 1996, Boston, MT, PWS Publishing Company.
61.
ChoY. and RheeS.: IEEE Trans. Instrum. Meas., 2004, 2, 330–334
