Microcracking in multipass weld metal of alloy 690 Part 2 – Microcracking mechanism in reheated weld metal

Abstract

To elucidate the microcracking (ductility dip cracking) mechanism in the multipass weld metal of alloy 690, the hot ductility of the reheated weld metal was evaluated using three different filler metals with varying contents of impurity elements such as P and S. Hot ductility of the weld metal decreased at temperatures over 1400 K, and the weld metal containing a low quantity of impurity elements showed much higher ductility than that containing a high quantity of impurity elements. Local deformability at high temperature of the alloy 690 reheated weld metal was compared with that of Invar alloy. Grain boundary sliding in alloy 690 occurred not in the intermediate temperature range (800–1000 K), where grain boundary sliding was activated in Invar alloy, but at high temperatures just below the melting temperature of alloy 690. The computer simulation of microsegregation suggested that the deterioration of hot ductility is caused by the grain boundary segregation of impurity elements during the multiple thermal cycling. The ductility dip cracking in the reheated weld metal resulted predominantly from the embrittlement of grain boundaries due to the imbalance between intergranular strength and intragranular strength at high temperature.