Although there have been a number of investigations on monitoring and controlling the resistance spot welding (RSW) of low carbon galvanised steels, those of advanced high strength steels (AHSS) are limited. A data acquisition system was designed for monitoring weld expulsion via the measurement of voltage, current, electrode force and displacement and the calculation of resistance. The dynamic resistance, electrode force and tip displacement were characterised and correlated with the phenomenon of expulsion during RSW of dual phase (DP) steel using an ac welder. Two control strategies for DP600 spot welding were proposed on the basis of the rate of change in the dynamic resistance and the electrode force.
CurtH.: Proc. Great Design in Steel Sem. on ‘The future revolution in automotive high strength steel usage’, Livonia, MI, USA, February 2004, Track-Two.
2.
WilliamsN. T. and ParkerJ. D.: Int. Mater. Rev., 2004, 2, 45–75.
3.
ChienC. S. and Kannatey-AsibuE.Jr: Weld. J., 2002, 9, 195s–199s.
4.
SenkaraJ., ZhangH. and HuS. J.: Weld. J., 2004, 4, 123s–132s.
5.
ZhangH.: Weld. Res. Suppl., 1999, 11, 373s–380s.
6.
LiW.: ‘Monitoring and diagnosis of resistance spot welding process’, PhD thesis, University Of Michigan, MI, USA, 1999.
7.
GedeonS. A., SorensenC. D., UlrichK. T. and EagarT. W.: Weld. Res. Suppl., 1987, 12, 378s–385s.
8.
HaoM., OsmanK. A., BoomerD. R. and NewtonC. J.: Weld. Res. Suppl., 1996, 1, 1s–8s
9.
ChoY. and RheeS.: Weld. J., 2002, 6, 104s–111s.
10.
VahaviolosS. J., CarlosM. F., SlykhousS. J. and TernowchekS. J.: Mater. Eval., 1981, 10, 1057–1060.
11.
SatonakaS. and MatsuyamaK.: Weld. World, 2000, 44, 4–10.
12.
BlumentrittN.: Weld. World, 2002, 46, 297–307.
13.
DickinsonD. W., FranklinJ. E. andStanyaA.: Weld. Res. Suppl., 1980, 6, 170s–176s.
14.
GouldJ. E. and PetersonW. A.: ‘Resistance welding research evaluations of coated steels, part two, dynamic resistance studies’, Research Report MR8809, Edison Welding Institute, Columbus, OH, USA, 1988.
15.
GouldJ. E. and PetersonW. A.: ‘Resistance welding research evaluations of coated steels, part three, nugget development studies’, Research Report MR8814, Edison Welding Institute, Columbus, Ohio, USA, 1988.
16.
GedeonS. A. and EagarT. W.: Metall. Trans. B, 1986, 12B, 887–901.
17.
GedeonS. A. and EagarT. W.: Metall. Trans. B, 1986, 12B, 879–885.
JouM.: J. Mater. Process. Technol., 2003, 132, 102–113.
22.
HaoM., OsmanK. A., BoomerD. R., NewtonC. J. and SheasbyP. G.: ‘On-line nugget expulsion detection for aluminum spot welding and weldbonding’, Report 960172, SAE, Detroit, MI, USA, 1996.
23.
JiC. T. and ZhouY.: J. Manufact. Sci. Eng., 2004, 126, 605–610.
24.
LalamS. H. and AgasheS.: Proc. Sheet Metal Welding Conf., Sterling Heights, MI, USA, May 2004, Ispat Inland.
25.
TsaiC. L., DaiW. L. and DickinsonD. W.: ‘Analysis and development of a real-time control methodology in resistance spot welding’, Report 910191, SAE, Detroit, MI, USA, 1991.
26.
BrowneD. J., ChandlerH. W., EvansJ. T. and WenJ.: Weld. Res. Suppl., 1995, 10, 339s–344s.
