Coarsening of the grains and pores during sintering has a pronouncedly negative effect on the densification of prealloyed brass powder compacts. This investigation examines the role of sintering variables in realising the complicated effects on densification and microstructure. Experiments were designed to model and evaluate the effect of sintering parameters such as temperature, time and furnace atmosphere on densification, grain and pore intercept as well as pore number. The study of microstructures suggests that there is a good correlation between grain and pore intercepts. It is concluded that pore coarsening is a result of supersolidus liquid phase sintering of Cu28Zn powder, and it can retard densification, which is in acceptable agreement with the experimental data.
GermanR. M. and OlevskyE. A.: ‘Modeling grain growth dependence on the liquid content in liquid-phase-sintered materials’, Metall. Mater. Trans. A, 1998, 29A, (12), 3057–3067. doi: 10.1007/s11661-998-0213-z
7.
JohnsonJ. L., BrezovskyJ. J. and GermanR. M.: ‘Effect of liquid content on distortion and rearrangement densification of liquid-phase-sintered W–Cu’, Metall. Mater. Trans. A, 2005, 36A, (6), 1557–1565. doi: 10.1007/s11661-005-0247-4
8.
TikareV. and CawleyJ.: ‘Numerical simulation of grain growth in liquid phase sintered materials. I: model’, Acta Mater., 1998, 46, (4), 1333–1342. doi: 10.1016/S1359-6454(97)00269-3
9.
YoonD. N. and HuppmannW. J.: ‘Grain growth and densification during liquid phase sintering of W–Ni’, Acta Metall., 1979, 27, (4), 693–698. doi: 10.1016/0001-6160(79)90020-8
10.
HanS. M. and KangS. J. L.: ‘Comment on “Kinetics of β-Si3N4 grain growth in Si3N4 ceramics sintered under high nitrogen pressure”’, J. Am. Ceram. Soc., 1993, 76, (12), 3178–3179. doi: 10.1111/j.1151-2916.1993.tb06629.x
11.
NikolicZ. S.: ‘Computer simulation of grain growth by grain boundary migration during liquid phase sintering’, J. Mater. Sci., 1999, 34, (4), 783–794. doi: 10.1023/A:1004577014266
12.
UpadhyayaG.: ‘Powder metallurgy technology’, 1997, Cambridge, Cambridge Int Science Publ.
13.
LuP., XuX., YiW. and GermanR. M.: ‘Porosity effect on densification and shape distortion in liquid phase sintering’, Mater. Sci. Eng. A, 2001, A318, (1), 111–121. doi: 10.1016/S0921-5093(01)01330-2
14.
GermanR. M.: ‘Supersolidus liquid-phase sintering of prealloyed powders’, Metall. Mater. Trans. A, 1997, 28A, (7), 1553–1567. doi: 10.1007/s11661-997-0217-0
15.
MohammadzadehA., AzadbehM. and Sabahi NaminiA.: ‘Densification and volumetric change during supersolidus liquid phase sintering of prealloyed brass Cu28Zn powder: modeling and optimization’, Sci. Sinter., 2014, 46, 23–35. doi: 10.2298/SOS1401023M
16.
MohammadzadehA., AzadbehM. and DanningerH.: ‘New concept in analysis of supersolidus liquid phase sintering of alpha brass’, Powder Metall., 2015, 58, (2), 123–132. doi: 10.1179/1743290114Y.0000000114
17.
AzadbehM., DanningerH., MohammadzadehA. and Gierl-MayerC.: ‘Macroscopic illustration of Zn evaporation during liquid phase sintering of Cu–28Zn prepared from prealloyed powder’, Powder Metall., 2015, 58, (2), 91–94. doi: 10.1179/0032589914Z.000000000208
18.
Sabahi NaminiA., AzadbehM. and MohammadzadehA.: ‘Microstructure and densification behavior of liquid phase sintered Cu–28Zn prealloyed powder’, Sci. Sinter., 2013, 45, 351–362. doi: 10.2298/SOS1303351S
19.
AzadbehM., DanningerH. and Gierl-MayerC.: ‘Particle rearrangement during liquid phase sintering of Cu–20Zn and Cu–10Sn–10Pb prepared from prealloyed powder’, Powder Metall., 2013, 56, (5), 342–346. doi: 10.1179/0032589913Z.000000000138
20.
LeeP. W., TrudelY., GermanR. M., FergusonB. L., EisenW. B., MoverK., MadanD., SanderowH., LampmanS. R. and DavidsonG. M.: ‘ASM handbook’‘Powder metal technologies and applications’Vol. 7, 1146; 1998, Materials Park, OH, ASM International.
21.
AzadbehM., MohammadzadehA. and DanningerH.: ‘Modeling the response of physical and mechanical properties of Cr–Mo prealloyed sintered steels to key manufacturing parameters’, Mater. Des., 2014, 55, 633–643. doi: 10.1016/j.matdes.2013.10.032
22.
AzadbehM., MohammadzadehA., DanningerH. and Gierl-MayerC.: ‘On the densification and elastic modulus of sintered Cr–Mo steels’, Metall. Mater. Trans. B, 2015, 46B, (3), 1471–1483. doi: 10.1007/s11663-015-0315-0
23.
HeidarzadehA., SaeidT., KhodaverdizadehH., MahmoudiA. and NazariE.: ‘Establishing a mathematical model to predict the tensile strength of friction stir welded pure copper joints’, Metall. Mater. Trans. B, 2013, 44B, (1), 175–183. doi: 10.1007/s11663-012-9755-y
24.
HeidarzadehA. and SaeidT.: ‘Prediction of mechanical properties in friction stir welds of pure copper’, Mater. Des., 2013, 52, 1077–1087. doi: 10.1016/j.matdes.2013.06.068
25.
HeidarzadehA., KhodaverdizadehH., MahmoudiA. and NazariE.: ‘Tensile behavior of friction stir welded AA 6061-T4 aluminum alloy joints’, Mater. Des., 2012, 37, 166–173. doi: 10.1016/j.matdes.2011.12.022
26.
Rahimzadeh IlkhichiA., SoufiR., HussainG., Vatankhah BarenjiR. and HeidarzadehA.: ‘Establishing mathematical models to predict grain size and hardness of the friction stir-welded AA 7020 aluminum alloy joints’, Metall. Mater. Trans. B, 2015, 46B, (1), 357–365. doi: 10.1007/s11663-014-0205-x
27.
HeidarzadehA., BarenjiR., EsmailyM. and IlkhichiA.: ‘Tensile properties of friction stir welds of AA 7020 aluminum alloy’, Trans. Ind. Inst. Met., 2015, 1–11, DOI: 10.1007/s12666-014-0508-2.
28.
MozammelM. and MohammadzadehA.: ‘The influence of pre-oxidation and leaching parameters on Iranian ilmenite concentrate leaching efficiency: optimization and measurement’, Measurement, 2015, 66, 184–194. doi: 10.1016/j.measurement.2015.02.025
