The programme for the powder metallurgy (PM) gear rolling process to predict the densification and deformation behaviours was developed through the finite element method. The compression test was carried out to obtain the material parameters for Shima–Oyane model including six parameters with respect to yield surface and workhardening. Those parameters were employed to analyse the densification behaviour of porous material during the rolling process. The simulation results with respect to the plastic deformation and the densification behaviour of the PM gear were confirmed and verified with the experimental results.
SiglL. S., RauG. and DennertC.: ‘When the going gets tough PM gears can cope’, Met. Powder Rep., 2007, 62, (10), 22–26.
2.
BrecherC., GorgelsC., KauffmannP. and RöthlingshöferT.: ‘3D tooth contact analysis - simulation possibilities for PM gears’, Proc. World PM2010 Powder Metallurgy Congress & Exhibition, Florence, Italy, October 2010, EPMA, 61–68.
3.
ChtourouH., GuillotM. and GakwayaA.: ‘Modeling of the metal powder compaction process using the cap model. Part I. Experimental material characterization and validation’, Int. J. Solids Struct., 2002, 39, (4), 1059–1075.
4.
OtarawannaS., ManonukulA. and CarmaiJ.: ‘Modelling of metal powder compaction using the modified Drucker-Prager cap model’, Proc. 18th Conf. of ‘Mechanical engineering network of Thailand’, Kohn Kaen, Thailand, October 2004, TMSE, 315–321.
5.
ShimaS. and OyaneM.: ‘Plasticity theory for porous metals’, Int. J. Mech. Sci., 1976, 18, (6), 285–291.
6.
LeeS. C. and KimK. T.: ‘Densification behavior of aluminum alloy powder under cold compaction’, Int. J. Mech. Sci., 2002, 44, (7), 1295–1308.
7.
KwonY. S., LeeH. T. and KimK. T.: ‘Analysis for cold die compaction of stainless-steel powder’, J. Eng. Mater. Technol.-Trans. ASME, 1997, 119, (4), 366–373.
8.
LeeS. C. and KimK. T.: ‘Densification behavior of metal power under cold compaction’, Trans. Kr. Soc. Mech. Eng.-A, 2002, 26A, (1), 95–104.
9.
SatsangiP. S., SharmaP. C. and PrakashR.: ‘An elastic–plastic finite element method for the analysis of powder metal forging’, J. Mater. Process. Technol., 2003, 136, (1–3), 80–87.
10.
ChungS. H., KwonY. -S., ParkS. J. and GermanR. M.: ‘Sensitivity analysis by the adjoint variable method for optimization of the die compaction process in particulate materials processing’, Finite Elem. Anal. Des., 2009, 45, (11), 836–844.
