Gas atomisation phenomenology of liquid metals and alloys is both intriguing and instructive. Predating atomistic studies of melt disintegration by almost three decades, it provides a functional means of correlation between drop sizes and processing parameters, as is the case in liquid metal spray forming. In this article a concise but thorough compilation of melt disintegration phenomenology is provided, with emphasis on high pressure gas atomisation, inclusive of notation on mean particle diameters, the role of viscosity, density and other dimensionless ratios that enter as variables in high pressure gas atomization and spray forming, as well as break up of a liquid column and theories of drop disintegration in flight. The article concludes by introducing the very efficient Surface Wave Formation principle which facilitates the treatment of complex atomisation geometries and turbulent regimes.
LeathamA., OgilvyA. and EliasL.:‘The osprey preform process and its application to light alloys and composites’, Proc. Symp. on ‘1991 P/M in aerospace and defense technologies’, Tampa, FL, USA, March 1991, (A92-50126 21-26), Princeton, NJ, Metal Powder Industries Federation, 1991, 235–242, 1991, 235–242.
2.
AntipasG. S. E.:‘Liquid column deformation and particle size distribution in gas atomisation’, Int. J. Comput. Mater. Sci. Surf. Eng., 2011, 4, 247–264.
3.
AntipasG. S. E., LekakouC. and TsakiropoulosP.:‘Microstructural characterisation of Al–Hf and Al–Li–Hf spray deposits’, Mater. Charact., 2011, 62, 402–408.
4.
MathurP.:Analysis of the Spray Deposition Process, 1988.
5.
UhlewinkelV. and BauckhageK.:Proc. 2nd Int. Conf. on ‘Spray forming’, 1993.
6.
LubanskaH.:‘Correlation of spray ring data for gas atomization of liquid metals’, J. Met., 1970, 22, 45–49.
7.
GorokhovskiM. and HerrmannM.:‘Modeling primary atomization’, Ann. Rev. Fluid Mech., 2008, 40, 343–366.
8.
DumouchelC.:‘On the experimental investigation on primary atomization of liquid streams’, Exp. Fluids, 2008, 45, 371–422.
9.
IshimotoJ., OhiraK., OkabayashiK. and ChitoseK.:‘Integrated numerical prediction of atomization process of liquid hydrogen jet’, Cryogenics, 2008, 48, 238–247.
10.
KumarA., GhoshS. and DhindawB. K.:‘Simulation of cooling of liquid Al-33 wt.% Cu droplet impinging on a metallic substrate and its experimental validation’, Acta Mater., 2010, 58, 122–133.
11.
PougatchK., SalcudeanM., ChanE. and KnapperB.:‘A two-fluid model of gas-assisted atomization including flow through the nozzle, phase inversion, and spray dispersion’, Int. J. Multiph. Flow, 2009, 35, 661–675.
12.
TrinhH. P., ChenC. P. and BalasubramanyamM. S.:‘Numerical simulation of liquid jet atomization including turbulence effects’, J. Eng. Gas Turb. Power, 2007, 129, 920–928.
13.
AraiM., ShimizuM. and HiroyasuH.:‘Break-up length and spray formation mechanism of a high speed liquid jet’, Proc. ICLASS-88, 1988, 177–184.
14.
Bruce SeeJ. and JohnstonG. H.:‘Interactions between nitrogen jets and liquid lead and tin streams’, Powder Technol., 1978, 21, 119–133.
15.
HiroyasuH., ShimizuM. and AraiM.:‘The breakup of high speed jet in a high pressure gaseous atmosphere’, Proc 2nd Int. Conf. on ‘Liquid atomization and spray systems’, 1982, 69–74.
16.
IngeboR. D.:‘Experimental and theoretical effects of nitrogen gas flow rate on liquid-jet atomization’, J. Propul. Power, 1988, 4, 406–411.
17.
KimM. and JonesH.:‘Effect of process variables in gas-jet atomization and production of multilayer deposits’, Proc. 4th Int. Conf. on ‘Rapidly quenched metals’, 1981, 85–88.
18.
PaiB. U. and NijagunaB. T.:‘The characterization of sprays’, ICLASS, 1982, 29–35.
ÜnalA.:‘Effect of processing variables on particle size in gas atomization of rapidly solidified aluminium powders’, Mater. Sci. Technol., 1987, 3, 1029–1039.
21.
ZanelliS.:‘Behaviour of a liquid jet near the nozzle’, Proc. Int. Conf. on ‘Liquid atomization and spray systems’, 1988, 1–14.
22.
HinzeJ. O.:‘Fundamentals of the hydrodynamic mechanism of splitting in dispersion processes’, AIChE J., 1955, 1, 289–295.
23.
WolfeH. and AndersenW.:‘Aerodynamic break-up of liquid drops’, Proc. 5th Int. Shock Tube Symp., 1145–1169; 1965, Naval Ordnance Lab. and American Physical Society.
24.
DombrowskiN. and JohnsW. R.:‘The aerodynamic instability and disintegration of viscous liquid sheets’, Chem. Eng. Sci., 1963, 18, 203–214.
25.
SquireH. B.:‘Investigation of the instability of a moving liquid film’, Bri. J. Appl. Phys., 1953, 4, 167–169.
26.
BradleyD.:‘On the atomization of liquids by high-velocity gases’, J. Phys. D: Appl. Phys., 1973, 6, 1724–1736.
27.
AntipasG. S. E.:‘Modelling of the break up mechanism in gas atomization of liquid metals. Part I: the surface wave formation model’, Comput. Mater. Sci., 2006, 35, 416–422.
28.
AntipasG. S. E.:‘Modelling of the break up mechanism in gas atomization of liquid metals Part II: the gas flow model’, Comput. Mater. Sci., 2009, 46, 955–959.
29.
YuleA. J. and DunkleyJ. J.:‘Atomization of melts for powder production and spray deposition’, 52, 38, 221; 1994, Oxford, Oxford University Press.
30.
AntipasG., LekakouC. and TsakiropoulosP.:‘The break up of melt streams by high pressure gases in spray forming’, Proc. 2nd Int. Conf. on ‘Spray forming’, 1993, 15–24.
31.
LiuJ., ArnbergL., BackstromN., KlangH. and SavageS.:‘Mass and heat transfer during ultrasonic gas atomization’, Powder Metall. Int., 1988, 20, 17–22.
32.
SnyderH. E., SenserD. W. and LefebvreA. H.:‘Mean drop sizes from fan spray atomizers’, J. Fluids Eng. Trans. ASME, 1989, 111, 342–347.
33.
SingerA.:‘A future of spray forming’, Proc. lst Int. Conf. on ‘Spray forming (ICSF)’, 1990, 01–03.
34.
BewlayB. P. and CantorB.:‘Gas velocity measurements from a close-coupled spray deposition atomizer’, Mater. Sci. Eng. A, 1989, 118, 207–222.
35.
AraiM., ShimizuM. and HiroyasuH.:ICLASS-88, 1988, 177–184.
36.
MehrottaS. P.:‘Mathematical modelling of gas atomization process for metal powder production – 1’, Powder Metall. Int., 1981, 13, 80–84.
37.
GordonG. D.:‘Mechanism and speed of breakup of drops’, J. Appl. Phys., 1959, 30, 1759–1761.
38.
ÜnalA.:‘Liquid break-up in gas atomization of fine aluminum powders’, Metall. Trans. B, 1989, 20, 61–69.
39.
HaasF. C.:‘Stability of droplets suddenly exposed to a high velocity gas stream’, AIChE J., 1964, 10, 920–924.
40.
TaylorG.:‘The instability of liquid surfaces when accelerated in a direction perpendicular to their planes I’, Proc. Royal Soc. A: Math., Phys. Eng. Sci., 1950, 201, 192–196.
41.
KellerJ. B. and KolodnerI.:‘Instability of liquid surfaces and the formation of drops’, J. Appl. Phys., 1954, 25, 918–921.
42.
AntipasG.:‘A study of the spray forming of Al-Li alloys’, Department of Materials Science and Engineering, University of Surrey, Guildford, 1995.
43.
NeikovO. D.:–‘Atomization and granulation’, in ‘Handbook of non-ferrous metal powders’, Chapter 5, 102–142; 2009, Oxford, Elsevier.
44.
LinS. P. and ReitzR. D.:‘Drop and spray formation from a liquid jet’, Ann. Rev. Fluid Mech., 1998, 30, 85–105.
