Abstract
Microporous titanium was fabricated by a special powder metallurgy process and the microstructure and the mechanical properties of the material were characterised by scanning electron microscopy and quasi-static compression. The pore sizes and porosities of the samples are ranged of 10–50 μm and 40–65%, respectively. Macroporous Ti samples with the pore sizes ranged from 500 to 800 μm were also prepared by the similar process for comparison. The microporous Ti exhibits not only a very different deformation behaviour from the macroporous Ti but also lower flow stress than the latter, completely different from those observed in common porous metals.
Get full access to this article
View all access options for this article.
