The compaction and sintering conditions required for avoidance of swelling and development of very coarse pores during liquid phase sintering of mixed elemental titanium powder metallurgy alloys are described with reference to the titanium–nickel binary system. Swelling is minimised by using low compaction pressure or short sintering time. Swelling appears to require the presence of persistent liquid and closed pores. Gas pressure within closed pores is the probable mechanism of swelling.
BohmA. and KiebackB.: Z. Metall., 1998, 89, 90–95.
4.
CaiY., LinB. and HuangP.: J. Cent. South Inst. MM. Met. (China), 1988, 19, 546–552.
5.
IvasishinO. M., K. O. Bondareva, O. I. Dekhtyar, D. G. Savvakin, O. M. Gryhachevsky and V. V. Tzkhonovych: Metallofiz. Nov. Tekhnol, 2004, 26, 963–980.
6.
LowR. J., RobertsonI. M. and SchafferG. B.: Scr. Mater., 2007, 56, 895–898.
7.
MajimaK., KiharaM. and ShojiK.: J. Jpn Soc. Powder Powder Metall, 1985, 32, 294–300.
8.
MajimaK., YoshimuraY. and ShojiK.: J. Jpn Soc. Powder Powder Metall., 1987, 34, 205–210.
9.
WeiW., LiuY., ThouK. and HuangB.: Powder Metall., 2003, 46, 246–250.
10.
AnokhinV. M., O. M. Ivasishin and A. N. Petrunko: Mater. Sci. Eng. A, 1998, A243, 269–272.
11.
GauthierM. and BarilE.: Proc. Cong. on ‘Advances in powder metallurgy and particulate materials’, Montreal, Canada, June 2005, MPIF, 127-140.
12.
KostovA. and FriedrichB.: Comput. Mater. Sci, 2006, 38, 374–385.
13.
RobertsonI. M., LowR. J. and SchafferG. B.: Proc. 11th World Conf. on ‘Titanium’, Kyoto, Japan, 2007, The Japan Institute of Metals, 1141-1144.
14.
RobertsonI. M. and SchafferG. B.: Powder Metall, 2009, 52, 225–232.
15.
TouloukianY. S., KirbyR. K., TaylorR. E. and DesaiP. S.: ‘Thermophysical properties of matter’, Vol. 12, ‘Thermal expan-sion - metallic elements and alloys’, 346; 1975, New York, NY, IFI/Plenum.
16.
CacciamaniG., de KeyzerJ., FerroR., KlotzU. E., LacazeJ. and WollantsP.: Intermetallics, 2006, 14, 1312–1325.
17.
OkamotoH.: ‘Desk handbook: phase diagrams for binary alloys’; 2000, Materials Park, OH, ASM.
18.
BeckerB. S. and BoltonJ. D.: Proc. Cong. on ‘Advances in powder metallurgy and particulate materials’, Washington, DC, USA, June 1996, MPIF, 14.119-132.
19.
BirlaN. C. and KrishnaswamyW.: Solid State Phenomena, 1989, 8-9, 307–318.
20.
LiuY., ChenL. F., TangH. P., LiuC. T., LiuB. and HuangB. Y.: Mater. Sci. Eng. A, 2006, A418, 25–35.
21.
IgharoM. and WoodJ. V.: Powder Metall, 1985, 28, 131–139.
22.
StupelM. M., HornsteinF., WeissB. Z. and RonM.: Metall. Trans. A, 1976, 7A, 689–693.
23.
MajimaK. and IsomotoT.: J. Jpn Soc. Powder Powder Metall, 1982, 29, 280–285.
24.
MajimaK. and SohamaY.: J. Jpn Soc. Powder Powder Metall, 1982, 29, 127–132.
25.
MajimaK. and SohamaY.: J. Jpn Soc. Powder Powder Metall, 1983, 30, 87–93.
26.
KivaloL. I., SkorokhodV. V. and GrigorenkoN. F.: Powder Metall. Metal Ceram., 1982, 21, 360–364.
27.
KivaloL. I., SkorokhodV. V. and PetrishchevV. A.: Powder Metall. Metal Ceram., 1982, 21, 534–536.
28.
KhromovV. G.: Powder Metall Metal Ceram., 1979, 18, 16–19.
29.
PanigrahiB. B., GodkhindiM. M., DasK., MukundaP. G., DabhadeV. V. and RamakrishnanP.: J. Mater. Res., 2005, 20, 827–836.
30.
PanigrahiB. B. and GodkindiM. M.: J. Mater. Res., 2005, 20, 580–585.
31.
DuY., ChangY. A., HuangB., GongW., JinZ., XuH., YuanZ., LiuY., HeY. and XieF.-Y.: Mater. Sci. Eng. A, 2003, A363, 140–151.
32.
MurrayN. G. D. and DunandD. C.: Acta Mater., 2004, 52, 2269–2278.
33.
LeeY. T., SchurmannH., GrundhoffK.-J. and PetersM.: Powder Metall. Int., 1990, 22, 11–16.
34.
GerdemannS. J. and AlmanD. E.: Proc. Cong. on ‘Advances in powder metallurgy and particulate materials’, New York, NY, USA, 2000, MPIF, 12.41-12.52.
