Abstract
A mixture of aluminium and 10 wt-% titanium powders was attrition milled for 10 h under air, nitrogen and vacuum atmospheres; pure aluminium powders were also prepared in a like manner. Particle size distribution, morphology and microstructure of the powders were studied by laser diffraction, scanning electron microscopy (SEM) and X-ray diffraction (XRD); special attention was paid to the influence of the milling atmosphere. There were differences in powder particle size obtained from pure Al powders that were not observed for Ti containing powders, however the same homogeneous morphology and microstructure was attained for the different milling atmospheres. The effect of milled powder annealing on microstructure was studied by differential scanning calorimetry (DSC) and XRD. New phases and their crystallite size were characterised as a function of annealing temperature, milling atmosphere, and powder microhardness. In short, the studied milling atmospheres for the production of Al–10%Ti powders do not affect the properties of the obtained powders, and in general, low cost atmospheres could be used.
Get full access to this article
View all access options for this article.