Determination of in-plane elastic constants of angle ply laminates from tensile measurements

Abstract

This paper presents a new method to completely characterise the in-plane elastic properties of an important type of angle ply laminates using only unidirectional tests. The angle ply laminates having the same number of identical plies are considered. Some new results for orthotropic laminates are found using this technique, namely, the conditions of existence of a particular direction in which there is no shear extension coupling. The laminates are subjected to three tensile tests: two in the orthotropic axes and the third one in a particular direction. The results allow a complete semiexperimental characterisation of the angle ply laminate, which do not need a priori knowledge of the elastic properties of the constitutive layer. Comparisons are made between numerical predictions and experimental results. Finally, the computational results were compared to the experimental results, verifying the capability of the method in order to predict the in-plane elastic properties of composite laminates.

Keywords

Angle ply Elastic properties Tension Laminate

Get full access to this article

View all access options for this article.

References

Carlsson

L. A.

, Adams

D. F.

and Pipes

R. B.

: ‘Experimental characterization of advanced composite materials’, 2014, Boca Raton, FL, CRC Press.

Buchanan

, Archer

, Townsend

, Jenkins

, McIlhagger

A. T.

and Quinn

J. P.

: ‘Determination of in-plane shear modulus of 3D woven composites with large repeat unit cells’, Plast. Rubber Compos., 2012, 41, 194–198.

X. -K.

and Bai

S. -L.

: ‘Tensile properties of multilayered biaxial weft knitted fabric reinforced composite material’, Plast. Rubber Compos., 2010, 39, 91–98.

Khondker

O. A.

, Ishiaku

U. S.

, Nakai

and Hamada

: ‘Tensile, flexural and impact properties of jute fibre-based thermosetting composites’, Plast. Rubber Compos., 2005, 34, 450–462.

Hodgkinson

M. J.

: in ‘Mechanical testing of advanced fibre composites’, (ed.), 2000, Boca Raton FL, USA, Wood head publishing Ltd & CRC Press LLC. Elsevier.

Carlsson

L. A.

, Adams

D. F.

and Pipes

R. B.

: ‘Basic experimental characterization of polymer matrix composite materials’, Polym. Rev., 2013, 53, (2), 277–302.

Lubin

: ‘Static test methods for composites’, 1985, New York, Van Nostrand Reinhold Company Inc.

Daniel

I. M

and Ishai

: ‘Engineering mechanics of composite materials’, 2nd edn; 2006, New York, Oxford University Press.

American Society for Testing and Materials: ‘‘ASTM annual book of standards, Vol.15.03, ‘Space stimulation; aerospace and aircrafts composite materials’, 2010, West Conshohocken, PA, ASTM.

10.

Gommers

, Verpoest

and van Houtte

: ‘Determination of the mechanical properties of composite materials by tensile tests. Part I: elastic properties’, J. Compos. Mater., 1998, 32, 310–334.

11.

Araujo

A. L.

, Soares

C. M.

, De Freitas

M. M.

, Pedersen

and Herskovits

: ‘Combined numerical-experimental model for the identification of mechanical properties of laminated structures’, Compos. Struct., 2000, 50, (4), 363–372.

12.

Marın

J. C.

, Cañas

, París

and Morton

: ‘Determination of G₁₂ by means of the off-axis tension test. Part I: review of gripping systems and correction factors’, Composites A, 2002, 33A, (1), 87–10.

13.

Marın

J. C.

, Cañas

, París

and Morton

: ‘Determination of G₁₂ by means of the off-axis tension test. Part II: a self-consistent approach to the application of correction factors’, Composites A, 2002, 33A, (1), 101–111.

14.

Boehler

J. P.

, El Aoufi

and Raclin

: ‘On experimental testing methods for anisotropic materials’, Res. Mech., 1987, 21, (1), 73–95.

15.

Verchery

and Gong

X. J.

: ‘Pure tension with off-axis tests for orthotropic laminates’ Proc. 12th Int. Conf. on ‘Composite materials’, Paris, France, July 1999, Woodhead Publishing, Paper 752..

16.

Verchery

: “Les invariants des tenseurs d'ordre 4 du type de l'élasticité”, In ‘Mechanical behavior of anisotropic solids/Comportment Méchanique des Solides Anisotropes’, (ed. Jean-Paul Boehler), 1982, Netherlands, Springer.

17.

Vannucci

and Verchery

: ‘A special class of uncoupled and quasi-homogeneous laminates’, Compos. Sci. Technol., 2001, 61, (10), 1465–1473.

18.

Verchery

: ‘Design rules for the laminate stiffness’, Mech. Compos. Mater., 2011, 47, (1), 47–58.

19.

Vincenti

, Vannucci

and Ahmadian

M. R.

: ‘Optimization of laminated composites by using genetic algorithm and the polar description of plane anisotropy’, Mech. Adv. Mater. Struct., 2013, 20, (3), 242–255.

20.

Vannucci

: ‘Plane anisotropy by the polar method’, Meccanica, 2005, 40, (4-6), 437–454.

21.

Vannucci

: ‘Designing the elastic properties of laminates as an optimisation problem: a unified approach based on polar tensor invariants’, Struct. Multidiscip. Optim., 2006, 31, (5), 378–387.

22.

Reddy

J. N.

: ‘Mechanics of laminated composite plates and shells: theory and analysis’, 2004, Boca Raton, FL, CRC Press.

23.

K. M.

and Avery

B. L.

: ‘Fully isotropic laminates and quasi-homogeneous anisotropic laminates’, J. Compos. Mater., 2117, 26, (14)–2107.

24.

Vannucci

, Barsotti

and Bennati

: ‘Exact optimal flexural design of laminates’, Compos. Struct., 90, (3), 337–345.