Restricted accessResearch articleFirst published online 2015-6
Effect of processing temperature on structure and properties of microinjection moulded thermoplastic polyurethane/multiwalled carbon nanotube composites
Thermoplastic polyurethane (TPU)/multiwalled carbon nanotubes (MWCNTs) composites were prepared through twin extrusion and microinjection moulding. The effect of processing temperature on the structure and properties of composites were studied. Scanning electron microscopy and rheological test reveal the realisation of well dispersion and network formation of carbon nanotube (CNT) in TPU. Enhanced electrical conductivity has been found with the increasing mould temperature from 25 to 150°C, post-moulding thermal treatment under 180°C for 1 h leads to a significant increase in the electrical conductivity by over three orders of magnitude for 5 wt-%MWCNT filled TPU composites. Images (SEM and TEM) characterise the morphology of CNT network under low and high temperatures and the microcontact reconstruction of CNT network is proposed to explain the enhancement of electrical conductivity. The increased crystallinity of TPU leads to the enhancement of tensile strength and Young's modulus of composites after thermal treatment.
FeiG., LiG., WuL. and XiaH.: ‘A spatially and temporally controlled shape memory process for electrically conductive polymer–carbon nanotube composites’, Soft Matter, 2012, 8, (19), 5123.
2.
XiaH. and SongM.: ‘Preparation and characterization of polyurethane–carbon nanotube composites’, Soft Matter, 2005, 1, (5), 386–394.
3.
SabbaY. and ThomasE. L.: ‘High-concentration dispersion of single-wall carbon nanotubes’, Macromolecules, 2004, 37, (13), 4815–4820.
PötschkeP., Abdel-GoadM., AligI., DudkinS. and LellingerD.: ‘Rheological and dielectrical characterization of melt mixed polycarbonate-multiwalled carbon nanotube composites’, Polymer, 2004, 45, (26), 8863–8870.
6.
PegelS., PoetschkeP., PetzoldG., AligI., DudkinS. M. and LellingerD.: ‘Dispersion, agglomeration, and network formation of multiwalled carbon nanotubes in polycarbonate melts’, Polymer, 2008, 49, (4), 974–984.
7.
AndrewW. M., MarkA. P., LawrenceA. B. and JonathanS. C.: ‘Injection-moulded scanning force microscopy probes’, Nanotechnology, 2005, 16, (8), 1249.
8.
TsengS. -C., ChenY. -C., KuoC. -L. and ShewB. -Y.: ‘A study of integration of LIGA and M-EDM technology on the microinjection molding of ink-jet printers' nozzle plates’, Microsyst. Technol., 2005, 12, (1–2), 116–119.
KimH. and ColtonJ.: ‘Fabrication and analysis of plastic hypodermic needles’, J. Med. Eng. Technol., 2005, 29, (4), 181–186.
11.
BauhoferW. and KovacsJ. Z.: ‘A review and analysis of electrical percolation in carbon nanotube polymer composites’, Compos. Sci. Technol., 2009, 69, (10), 1486–1498.
12.
LiJ., MaP. C., ChowW. S., ToC. K., TangB. Z. and KimJ. -K.: ‘Correlations between percolation threshold, dispersion state, and aspect ratio of carbon nanotubes’, Adv. Funct. Mater., 2007, 17, (16), 3207–3215.
13.
GibozJ., CopponnexT. and MéléP.: ‘Microinjection molding of thermoplastic polymers: morphological comparison with conventional injection molding’, J. Micromech. Microeng., 2009, 19, (2), 025023.
14.
JulienG., ThierryC. and PatriceM.: ‘Microinjection molding of thermoplastic polymers: a review’, J. Micromech. Microeng., 2007, 17, (6), R96.
15.
ZhangR., DowdenA., DengH., BaxendaleM. and PeijsT.: ‘Conductive network formation in the melt of carbon nanotube/thermoplastic polyurethane composite’, Compos. Sci. Technol., 2009, 69, (10), 1499–1504.
16.
AligI., PötschkeP., LellingerD., SkipaT., PegelS., KasaliwalG. R. and VillmowT.: ‘Establishment, morphology and properties of carbon nanotube networks in polymer melts’, Polymer, 2012, 53, (1), 4–28.
17.
AligI., LellingerD., EngelM., SkipaT. and PötschkeP.: ‘Destruction and formation of a conductive carbon nanotube network in polymer melts: in-line experiments’, Polymer, 2008, 49, (7), 1902–1909.
18.
PanY., ChengH. K. F., LiL., ChanS. H., ZhaoJ. and JuayY. K.: ‘Annealing induced electrical conductivity jump of multi-walled carbon nanotube/polypropylene composites and influence of molecular weight of polypropylene’, J. Polym. Sci. B, 2010, 48B, (21), 2238–2247.
19.
GunesI. S., JimenezG. A. and JanaS. C.: ‘Carbonaceous fillers for shape memory actuation of polyurethane composites by resistive heating’, Carbon, 2009, 47, (4), 981–997.
20.
ZhangC., WangP., MaC. -A., WuG. and SumitaM.: ‘Temperature and time dependence of conductive network formation: dynamic percolation and percolation time’, Polymer, 2006, 47, (1), 466–473.
21.
LiC., ThostensonE. T. and ChouT. -W.: ‘Dominant role of tunneling resistance in the electrical conductivity of carbon nanotube-based composites’, Appl. Phys. Lett., 2007, 91, (22), 223114.
22.
PotschkeP., FornesT. D. and PaulD. R.: ‘Rheological behavior of multiwalled carbon nanotube/polycarbonate composites’, Polymer, 2002, 43, (11), 3247–3255.
23.
AligI., LellingerD., DudkinS. M. and PötschkeP.: ‘Conductivity spectroscopy on melt processed polypropylene–multiwalled carbon nanotube composites: recovery after shear and crystallization’, Polymer, 2007, 48, (4), 1020–1029.
24.
PötschkeP., BhattacharyyaA. R. and JankeA.: ‘Morphology and electrical resistivity of melt mixed blends of polyethylene and carbon nanotube filled polycarbonate’, Polymer, 2003, 44, (26), 8061–8069.
25.
AligI., SkipaT., EngelM., LellingerD., PegelS. and PötschkeP.: ‘Electrical conductivity recovery in carbon nanotube–polymer composites after transient shear’, Physica Status Solidi B, 2007, 244B, (11), 4223–4226.
26.
SimmonsJ. G.: ‘Generalized formula for the electric tunnel effect between similar electrodes separated by a thin insulating film’, J. Appl. Phys., 1963, 34, (6), 1793–1803.
27.
SeymourR. W., EstesG. M. and CooperS. L.: ‘Infrared studies of segmented polyurethan elastomers. I: hydrogen bonding’, Macromolecules, 1970, 3, (5), 579–583.
28.
AuriliaM., PiscitelliF., SorrentinoL., LavorgnaM. and IannaceS.: ‘Detailed analysis of dynamic mechanical properties of TPU nanocomposite: the role of the interfaces’, Eur. Polym. J., 2011, 47, (5), 925–936.
29.
RussoP., LavorgnaM., PiscitelliF., AciernoD. and Di MaioL.: ‘Thermoplastic polyurethane films reinforced with carbon nanotubes: the effect of processing on the structure and mechanical properties’, Eur. Polym. J., 2013, 49, (2), 379–388.
30.
ChenT. K., TienY. I. and WeiK. H.: ‘Synthesis and characterization of novel segmented polyurethane/clay nanocomposites’, Polymer, 2000, 41, (4), 1345–1353.
31.
ZhanY. H., PatelR., LavorgnaM., PiscitelliF., KhanA., XiaH. S., BenkreiraH. and CoatesP.: ‘Processing of polyurethane/carbon nanotubes composites using novel minimixer’, Plast. Rubber Compos., 2010, 39, (9), 400–410.
