Two types of poly-para-phenylene-copolymers (PR-120 as an extrusion and PR-250 as an injection moulding grade) are commercially available. In this paper, their mechanical properties were evaluated as a function of their molecular characteristics. The higher viscosity PR-120 possesses a higher strength, modulus and hardness, which is in agreement with its lower molecular flexibility compared to PR-250. On the other hand, the latter version shows a better fracture toughness. All tests were carried out at room temperature.
FriedrichK, AlmajidAA, NollA, BurkhartT: ‘Effect of thermal treatment on hardness and fracture toughness of a poly-para-phenylene-copolymer (PPP)’, J. Mater. Sci., 2011, 46, 1714–1722.
AlmajidAA, FriedrichK, NollA, GyurovaL: ‘Poly-para-phenylene-copolymers (PPP) for extrusion and injection molding, part 1: molecular and rheological differences’, Plast. Rubber Compos., 2013.
5.
FriedrichK, BurkhartT, AlmajidAA, HaupertF: ‘Mechanical properties and scratch/wear behaviour of a new poly-para-phenylene-copolymer (PPP)’, Int. J. Polym. Mater., 2010, 59, 680–692.
OliverWC, PharrGM: ‘An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments’, J. Mater. Res., 1992, 7, 1564–1583.
8.
Karger-KocsisJ, FriedrichK: ‘Temperature and strain-rate effects on the fracture toughness of poly(ether ether ketone) and its short fiber reinforced composites’, Polymer, 1986, 27, 1753–1760.
9.
FriedrichK: ‘Crazes and shear bands in semi-crystalline thermoplastics’ in ‘Crazing in polymers, advances in polymer science’, (ed. H. H. Kausch), Vol. 52/53, 225–274; 1983, Berlin, Springer-Verlag.
