A nanocomposite hybrid coating was synthesised from tetraethylethoxysilane and 3-methacryloxypropyl trimethoxysilane in the presence of benzoyl peroxide as an initiator agent by sol–gel process. The AISI 316L stainless steel (SS) was coated with this coating at ambient temperature. The effect of the hybrid coating on the adhesion promotion of bone cement to SS substrate was investigated qualitatively as well as quantitatively. The adhesion tests indicated that the coated 316L SS compared with the uncoated samples induces increases of ∼450% in strength and 200% in strain by single lap joint shear test. The samples were also characterised using scanning electron microscopy, optical microscopy, Fourier transform infrared spectroscopy and small angle X-ray scattering (SAXS). The test results indicated that the coated surfaces were quite uniform and crack free. Silicon mapping and SAXS analysis of the coated samples indicated that the inorganic moieties of the hybrid (i.e. Si–O–Si) were uniformly distributed and had a particle size distribution of ∼1·5 nm. In addition, the haemocompatibility of the coated sample was investigated by clotting time test. The result of clotting time for the coated 316L SS showed an increase of 74% compared with the uncoated samples.
AlexanderH, BrunskiJB, CooperSL, HenchLL, HergenrotherRW, HoffmanAS, KohnJ, LangerR, PeppasNA, RatnerBD, ShalabySW, VisserSA, YannasIV:‘Classes of materials used in medicine’in‘Biomaterials science: an introduction to materials in medicine’(, RatnerB D, et al..), 37–130; 1996, New York, Academic Press.
2.
WoodmanJL, BlackJ, NunamakerDM: ‘Release of cobalt and nickel from a new total finger joint prosthesis made of vitallium’, J. Biomed. Mater. Res., 1983, 17, 655–660.
MathiesenE, LindgrenJ, BlongremG, ReinholtF: ‘Corrosion of modular hip prostheses’, J. Bone Joint Surg. Br., 1991, 73, 569–575.
5.
YehJM, WengCJ, LiaoWJ, MauYW: ‘Anticorrosively enhanced PMMA–SiO2 hybrid coatings prepared from the sol–gel approach with MSMA as the coupling agent’, Surf. Coat. Technol., 2006, 201, 1788–1795.
6.
ManivasagamG, DhinasekaranD, RajamanickamA: ‘Biomedical implants: corrosion and its prevention – a review’, Recent Patent Corr. Sci., 2010, 2, 40–54.
7.
BessedeJL: ‘Contribution a l'etude des mecanismes de renforcement des proprietes mecaniques des verres par depot sol–gel’, PhD thesis, INSA, Lyon, France, 1990, 112.
8.
CornuJF: ‘Synthese et etude de la relation microstructure – proprietes de materiaux hybrides organiques–inorganiques a base TMSM et application au renforcement des verres’, PhD thesis, INSA, Lyon, France, 1993, 230.
9.
SchmidtH, SieferlingB, PhillippG, DeichmannK: in‘Ultrastructure of processing of advanced ceramics’, (ed. , MackenzieJ D, UlrichD R), 651; 1998, New York, Wiley.
10.
SunL, BerndtCC, GrossKA, KucukA: ‘Material fundamentals and clinical performance of plasma-sprayed hydroxyapatite coatings: a review’, Biomed. Mater., 2001, 58, 570–592.
11.
BrinkerCJ, RamanNK, LoganMM, SeghalR, AssinkRA, HuaDW, WardTL: ‘Structure–property relationships in thin films and membranes’, J. Sol–Gel Sci. Technol., 1995, 4, 117–135.
12.
ZarzyckiJ: ‘Past and present of sol–gel science and technology’, J. Sol–Gel Sci. Technol., 1997, 8, 17–22.
13.
HuangHH, OrlerB, WilkesGL: ‘Structure–property behavior of new hybrid materials incorporating oligomeric species into sol–gel glasses’, Macromolecules, 1987, 20, 1322.
14.
HsiueGH, KuoWJ, HuangYP, JengRJ: ‘Microstructural and morphological characteristics of PS-SiO2 nanocomposites’, Polymer, 2000, 41, 2813–2825.
15.
KellyA: ‘Concise encyclopedia of composite materials’; 1994, New York, Pergamon.
16.
SanchezC, RibotF: ‘Design of hybrid organic-inorganic materials synthesized via sol-gel chemistry’ in ‘First European Workshop on Hybrid Organic-Inorganic Materials: Synthesis, Properties and Applications’, (ed. , SanchezC, RibotF), 9–54; 1993, Chateau de Bierville, France.
17.
SakkaS: ‘Preparation and properties of sol–gel coating films’, J. Sol–Gel Sci. Technol., 1994, 2, 451–455.
18.
EllsworthMW, NovakBM: ‘Mutually interpenetrating inorganic–organic networks. New routes into nonshrinking sol–gel composite materials’, J. Am. Chem. Soc., 1991, 113, (7), 2756–2758.
19.
EspiardP, GuyotA: ‘Poly (ethyl acrylate) latexes encapsulating nanoparticles of silica: 2. Grafting process onto silica’, Polymer, 1995, 36, 4391–4395.
PaviaDL, LampmanGM, KrizGS: ‘Introduction to spectroscopy: guide for student of organic chemistry’; 1996, Philadelphia, Saunders Golden Sunburst Series.
27.
ParkJY, AcarMH, AkhakulA, KuhlmanW, MayesAM: ‘Polysulfone-graft-poly(ethylene glycol) graft copolymers for surface modification of polysulfone membranes’, Biomaterials, 2006, 27, (6), 856–865.
28.
WoignierT, PhalippouJ, HdachH, LarnacG, PernotF, SchererGW: ‘Evolution of mechanical properties during the alcogel–aerogel–glass process’, J. Non-Cryst. Solids, 1992, 147–148, 672–680.
29.
DebyeP, BuecheAM: ‘Scattering by an inhomogeneous solid’, J. Appl. Phys., 1949, 20, 518–525.
30.
MaiC, LivetF, VigierG: ‘A numerical-calculation method for spherical and ellipsoidal particle-size distribution application to Zn precipitates in Al–Zn alloys’, Scr. Metall., 1981, 15, 1179–1182.
31.
KothaSP, LiebermanM, VickersA, SchmidSR, MasonJJ: ‘Adhesion enhancement of steel fibers to acrylic bone cement through a silane coupling agent’, Biomed. Mater. Res., 2006, 76, (1), 111–109.
32.
SanchezC, RibotF, LebeauB: ‘Molecular design of hybrid organic–inorganic nanocomposites synthesized via sol–gel chemistry’, J. Mater. Chem., 1999, 9, 35–44.
33.
BrinkerC, SchererGW: ‘Sol–gel science: the physics and chemistry of sol–gel processing’; 1990, New York, Academic Press.
34.
HayakawaT, HorieK, AidaM, KanayaH, KobayashiT, MurataY: ‘The influence of surface conditions and silane agents on the bond of resin to dental porcelain’, Dent. Mater., 1992, 8, 238–240.
35.
PlueddemannEP: ‘Adhesion through silane coupling agents’, J. Adhes., 1970, 2, 184–201.
36.
JonesMI, McCollIR, GrantDM, ParkerKG, ParkerTL: ‘Haemocompatibility of DLC and TiC–TiN interlayers on titanium’, Diamond Relat. Mater., 1999, 8, 457–462.
37.
ZhengCL, CuiFZ, MengB, GeJ, LiuDP, LeeIS: ‘Hemocompatibility of C–N films fabricated by ion beam assisted deposition’, Surf. Coat. Technol., 2005, 193, 361–365.
