The various methods of self-sensing and self-healing developed within the
Composite Systems Innovation Centre, University of Sheffield, are reviewed.
Damage sensing using electrical resistance in carbon fibre reinforced composite
or using the fibres as optical sensing elements in glass fibre reinforced
composite is demonstrated. Amelioration of low level damage is demonstrated
in both monolithic composite materials and sandwich structures using direct
chemical reactions within the matrix without the use of encapsulants. These
reactions can be activated by resistive heating of the material itself. The
use of a combination of these techniques could create a truly smart structure
able to both sense and repair damage and degradation.
PangJWC, BondIP: ‘A hollow fibre reinforced polymer compositeencompassing self-healing and enhanced damage visibility’, Compos.Sci. Technol., 2005, 65, 1791–1799.
4.
TodorokiA, SamejimaY, HiranoY, MatsuzakiR: ‘Piezoresistivity of unidirectionalcarbon/epoxy composites for multiaxial loading’, Compos.Sci. Technol., 2009, 69, 1841–1846.
5.
AngelidisN, IrvingPE: ‘Detection of impact damage in CFRPlaminates by means of electrical potential techniques’, Compos.Sci. Technol., 2007, 67, 594–604.
KisterG, RalphB, FernandoGF: ‘Damage detection in glass fibre-reinforcedplastic composites using self-sensing E-glass fibres’, SmartMater. Struct., 2004, 13, 1166–1175.
14.
HarrickNJ: ‘Internal reflection spectroscopy’; 1967, NewYork, John Wiley & Sons Inc.
15.
BootkulD: ‘Fibre sensor for cure monitoring incomposite materials’, PhD thesis, TheUniversity of Sheffield, Sheffield, UK, 2007.
16.
BunimovichD, KellnerR, KrskaR, MesicaA, PaissI, SchieslU, TackeM, TagaK, KatzirA: ‘A system for monitoring and controlof processes based on IR fibers and tunable diode-lasers’, J.Mol. Struct., 1993, 292, 125–132.
17.
XiaF, ZhangX, RenJ, ChenG, MaH, AdamJL: ‘Glass formation and crystallizationbehavior of a novel GeS2–Sb2S3–PbSchalcogenide glass system’, J. Am. Ceram. Soc., 2006, 89, 2154–2157.
18.
TakebeH, BradyDJ, HewakDW, MorinagaK: ‘Thermal properties of Ga2S3-basedglass and their consideration during fiber drawing’, J.Non-Cryst. Solids, 1999, 258, 239–243.
19.
AbdulhalimI, PannellCN, DeolRS, HewakDW, WylangowskiG, PayneDN: ‘High-performance acoustooptic chalcogenideglass based on Ga2S3–La2S3systems’, J. Non-Cryst. Solids, 1993, 166, 1251–1254.
20.
TalrejaR: ‘Damage mechanics of composite materials’; 1994, Amsterdam, Elsevier.
21.
Gamstedt and R. TalrejaEK: ‘Fatigue damage mechanisms in unidirectionalcarbon-fibre-reinforced’, J. Mater. Sci., 1999, 34, 2535–2546.
22.
JonesFR: ‘Can we fix it?’, Mater.World, 2007, 15, 26–27.
23.
HayesSA, ZhangW, BranthwaiteM, JonesFR: ‘Self-healing of damage in fibre-reinforcedpolymer–matrix composites’, J. R. Soc.Interf., 2007, 381–387.
24.
JonesFR, ZhangW, HayesSA: ‘Thermally induced self healing of thermosettingresins and matrices in smart composites’, Self-HealingMater., 2007, 69–93.
25.
HayesSA, JonesFR, MarshiyaK, ZhangW: ‘A self-healing thermosetting compositematerial’, Composites A, 2007, 38A, 1116–1120.
26.
TakedaK, UnnoH, ZhangM: ‘Polymerreaction in polycarbonate with Na2CO3’, J.Appl. Polym. Sci., 2004, 93, 920–925.
27.
ChenJS, OberCK, PoliksMD: ‘Characterization of thermally reworkablethermosets: materials for environmentally friendly processing and reuse’, Polymer, 2002, 43, 131–139.
