Modelling of rotational moulding process: analysis of process parameters and warpage on cycle times

Abstract

The analysis of heat transfer in the rotational moulding process is a non-linear multi-dimensional matter, which involves a number of process conditions and thermal parameters. The present study mostly involves dimensional analysis, the changing effects of the process parameters and conditions on the process times for different processing circumstances. They have been explored and compared by using the two-dimensional slip flow model from Lim and Ianakiev. The modelling helps to further identify and understand the dependence of the key thermal parameters due to external heating, external cooling, external–internal cooling and warpage on cycle times of the rotational moulding. In addition, the detail of the coincident node technique is discussed to present the key components of the conductivity matrix for an element ‘abutting' a coincident node interface.

Keywords

ROTATIONAL MOULDING (ROTOMOULDING)HEAT TRANSFER FINITE ELEMENT METHOD (FEM)WARPAGE COINCIDENT NODE TECHNIQUE

Get full access to this article

View all access options for this article.

References

Lim

K. K.

and Ianakiev

: Proc. ANTEC, Chicago, IL, USA, May 2004, SPE, 892-896.

Ramazzotti

: Proc. SPE RETEC, October 1975, SPE, 43-63.

Crawford

R. J.

and Throne

J. L.

: ‘Rotational molding technology’, 315; 2001, Portland, William Andrew Inc.

Beall

G. L.

: ‘Rotational molding — design, materials, tooling, and processing’; 1998, Munich, Hanser Publishers.

Narkis

and Rosenzweig

: ‘Polymer powder technology’; 1995, Chichester, John Wiley & Sons.

Kearns

M. P.

, Crawford

R. J.

and Corrigan

: Proc. ANTEC, Orlando, FL, USA, May 2000, SPE, 1360-1365.

Wright

M. J.

, Spence

A. G.

and Crawford

R. J.

: Proc. ANTEC, Toronto, Canada, April 1997, SPE, 3184-3188.

Long

: ‘Essential heat transfer’; 1999, Malaysia, Longman.

Olson

L. G.

, Gogos

, Pasham

and Liu

: Proc. ASME Heat Transf Division , 1997, 1, 113–119.

10.

Gogos

, Olson

L. G.

, Liu

and Pasham

: Polym. Eng. Sci ., 1998, 38, 1387–1397.

11.

Gogos

, Olson

L. G.

and Liu

: Polym. Eng. Sci ., 1999, 39, 617–629.

12.

: ‘Prediction of the rotational moulding cycle’, PhD thesis, Queen's University, 1996.

13.

Sun

D. W.

and Crawford

R. J.

: Plast. Rubber Process Appl ., 1993, 19, 47–53.

14.

Sun

D. W.

and Crawford

R. J.

: Polym. Eng. Sci ., 1993, 33, 132–139.

15.

Crawford

R. J.

and Walls

K. O.

: SPE Topical Conference on Rotational Molding, Cleveland, OH, USA, 135-139; 1999, SPE.

16.

Crawford

R. J.

: Proc. ANTEC, Atlanta, GA, USA, April 1998, SPE, 1108-1111.

17.

Chen

C. H.

, White

J. L.

and Ohta

: Polym. Eng. Sci ., 1990, 30, 1523–1528.

18.

Spence

: Proc. ANTEC, Atlanta, GA, USA, April 1998, SPE, 984-990.

19.

Kreith

and Bohn

M. S.

: ‘Principles of heat transfer’, 1986, New York, Harper & Row.

20.

Chen

C. H.

, White

J. L.

and Ohta

: Int. Polym. Process ., 1991, 6, 212–216.

21.

Lim

K. K.

and Ianakiev

: Proc. ANTEC, Chicago, IL, USA, May 2004, SPE, 897-901.

22.

Lim

K. K.

and Ianakiev

: Polym. Eng. Sci ., 2006, 46, (7), 960–969.

23.

Samonds

: ‘Finite element simulation of solidification in sand mould and gravity die castings’, PhD thesis, University of Swansea, 1985.

24.

Samonds

, Lewis

R. W.

, Morgan

and Symberlist

: ‘Computational techniques in heat transfer’, Chapter 13; 1985, Swansea, Pineridge Press.

25.

Lewis

R. W.

, Sze

W. K.

and Huang

H. C.

: Int. J. Numer. Method Eng ., 1988, 25, 611–624.