A melt processable polyacrylonitrile (PAN) terpolymer containing a UV active comonomer was spun into fibres. The as spun fibres could be processed into mats by thermal compaction of the thermoplastic fibres. The mats could then be stabilised by UV assisted cross-linking followed by thermo-oxidative cyclisation. The mats were successfully carbonised at 1500°C. The micro-structure and tensile properties of carbon fibres and the resulting mats are reported. The melt processing route has the potential to become a high volume, low cost production process for carbonaceous non-wovens for automotive composite laminate applications.
WallE. J., SullivanR. and CarpenterJ.: ‘Progress report for automo-tive lightweighting materials’, US Department of Energy, Office of Freedom Car and Vehicle Technologies, Washington, DC, 2005.
2.
LideD. R. (ed.): ‘CRC handbook of chemistry and physics’, 85th edn, 12-204; 2004-2005, Boca Raton, CRC press.
3.
FitzerE. and ManochaL. M.: ‘Carbon reinforcements and carbon/ carbon composites’; 1998, Berlin, Springer-Verlag Publishers.
4.
BuckleyJ. D. and EdieD. D.: ‘Carbon-carbon materials and composites’; 1993, Park Ridge, NJ, Noyes Publications.
5.
WalkerN. J.: ‘Carbon fibers technology, uses and prospects’, 55; 1986, Park Ridge, NJ, Noyes Publications.
6.
VaidyaU. K., MahfuzH and JeelaniS.: J. Adv. Mater., 1995, 26 (2), 41–47.
7.
SuginoM., InoueY. and FujikawaT.: Japanese patent 63060155, 1988.
8.
Armstrong-CarrollE. and CochranR.: ‘ASTM special technical publication’, STP 1230, 124;1995, Philadelphia, PA, ASTM.
9.
VaidaU. K., MahfuzH. and JeelaniS.: J. Reinf Plast. Compos., 1996, 15 (10), 988.
10.
DelanoyC. and GillespieJ.: US patent, 2003008125, 2003.
11.
Technical literature on ‘Advanced fiber nonwovens’ (AFN), Hollingsworth and Vose, available at: http://hovo.com/products/ afn/index.htm (December2005).
12.
GuptaA. K., PaliwalD. K. and BajajP.: J. Macromol. Set, Rev. Macromol Chem. Phys., 1991, C31, 1.
13.
BhanuV. A., RangarajanP., WilesK., BortnerM., SankarpandianM., GodshallD., GlassT. E., BanthiaA. K., YangJ., WilkesG., BairdD. and McGrathJ. E.: Polymer, 2002, 43, 4841.
14.
FrushourB. G.: ‘Acrylic fiber technology and application’, 218; 1995, New York, Marcel Dekker Inc.
15.
NaskarA. K., WalkerR. A., ProulxS., EdieD. D. and OgaleA. A.: Carbon, 2005, 43 (5), 1065.
16.
Technical data of SIGRATEX, SGL Carbon Group, available at: http://sglcarbon.com/sgl_t/industrial/sigratex/pdf/sigratex.pdf (January2006).
