A finite element approach is used to model HDPE melt flows and melt temperature distributions in a 63.5 mm single screw extruder. The effect of length scale is examined using a 38 mm extruder, including the effect of flight clearance. Transient melt temperature fields are also presented.
FennerR. T.: ‘Extruder screw design’; 1970, London, Illiffe Books, Ltd.
19.
PalitK.: in Proc. Int. Conf. on ‘Science and technology of polymer processing’, (ed. SuhN. P. and SungN. H.), 557–679; 1977, Cambridge, MA, MIT Press.
20.
KiihnleH.: Durchsatz, druckverlauf und energieumsatz in schmelzebeschickten extrudern’, Forschungsvorhaben Nr. 4084; 1981, Stuttgart, Germany, IKT.
21.
ViriyayuthakornM. and KassahunB.: SPE ANTEC, New Orleans, 1984, 81–84.
22.
PittmanJ. F. T. and RashidK.: J. Polym. Eng., 1985, 5, 1–48.
23.
RauwendaalC. J.: ‘Leakage flow in screw extruders’, Doctoral thesis, Twente University, The Netherlands, 1988.
24.
SpaldingM. et al.: 51st SPE ANTEC, New Orleans, LA, 1993, 1533–1541.
25.
GramannP. and OsswaldT.: 51st SPE ANTEC, New Orleans, LA, 1993, 2774–2781.
26.
RauwendaalC. J. and Ingen HouszJ. F.: Adv. Polym. Technol., 1988, 8, 290–316.
27.
HughesT. J. R. and BrooksA. N.: Comput. Methods Appl. Mech. Eng., 1982, 32, 199–259.
28.
RauwendaalC. J.: 47th SPE ANTEC, New York, NY, 1989, 108–110.
29.
RauwendaalC. J. (ed.): ‘Mixing in polymer processing’; 1991, New York, NY, Marcel Dekker.
30.
RauwendaalC. J.: ‘Modeling and computer simulation of plasticating single screw extruders’, paper presented at the Soft-EXTRUSION workshop, Alvor, Portugal, October2004, submitted toPlastics, Rubber & Composites: Macromolecular Engineering.
