Surface tensions of Ni3S2, Cu2S and FeS molten phases were measured using an improved sessile drop method in an inert atmosphere of purified argon. The traditional sessile drop method was modified before measurements were obtained. The surface tension values were obtained over a wide range of temperature from their respective melting temperatures to 1300°C. In the temperature range 1000–1300°C, surface tension of molten Ni3S2 decreased linearly with increasing temperature. However, the surface tensions of molten FeS and Cu2S phases were approximately constant over this range of temperature.
CarlaM., CecchiniR.1991. An automated apparatus for interfacial tension measurements by sessile drop technique, Rev. Sci. Instrum., 62, 1088–1092.
2.
ChakrabartiD.J., LaughlinD.E.1983. Cu–S (copper sulfur), in ‘Binary alloy phase diagrams’, Vol. 2, 2nd edn, 1467–1471, Metals Park, OH, ASM International.
3.
ChiriacH., TomutM., NaumC., NeculaF., NagacevschiV.1997. On the measurement of surface tension for liquid FeSiB glass-forming alloys by sessile drop method.Mater. Sci. Eng. A, A226–228, 341–343.
4.
DorseyN.E.1928. Measurement of surface tension, Washington Accad. Sci., 18, 505.
5.
DrelichJ., FangC., WhiteC.L.2002. Measurement of interfacial tension in fluid–fluid systems, in ‘Encyclopedia of surface and colloid science’, 3152–3166, New York, Taylor& Francis.
6.
EustathopoulosN., NicholasM.G., DrevetB.1999. Wettability at high temperatures, in ‘Pergamon materials series’, Vol. 3, 1st edn, Oxford, Elsevier Science.
7.
EustathopoulosN., SobczakN., PasseroneA., NogiK., 2005. Measurement of contact angle and work of adhesion at high temperature, J. Mater. Sci., 40, 2271–2280.
8.
IpS.W., ToguriJ.M.1993. Surface and interfacial tension of the Ni–Fe–S, Ni–Cu–S, and fayalite slag systems, Metall. Trans. B, 24B, 657–668.
9.
KozakevichF.1959. Surface tension, in ‘Physicochemical measurements at high temperatures’, (ed. , BockrisJ), 208, London, Butterworth Scientific Publications.
10.
KucharskiM., IpS.W., ToguriJ.M.1993. The surface tension and density of Cu2S, Fes, Ni3S2 and their mixtures, Can. Metall. Q., 33, 197–203.
11.
NagamoriM.1969. Density of molten Ag–S, Cu–S, FeS, and Ni–S systems, Trans. Metal. Soc. AIME, 245, 1897–1902.
12.
NakamotoM., LiukkonenM., FreemanM., HeikinhemoE., HämäläinenM., HolappaL.2008. Measurement of surface tension of solid Cu by improved multiphase equilibrium, Metall. Mater. Trans. B, 39B, 570–580.
13.
SerginB.I., LepinskikhB.M.1964. Tr. Pervoi. Sverdl. Nauchu-Tekhn. Konf. Molodykh Uchenykh, Akad. Nauk SSSR, Ural'sk. Filial., Inst. Met., Sverdlovsk Pt I, 9–11.
