Phase equilibria determination in complex slag systems

Abstract

Despite the wealth of information available on phase equilibria of oxide systems, there remain many gaps and inconsistencies in the knowledge base. From an industry perspective, there is an ongoing need to adequately describe the phase chemistry of slag systems in order to optimise process performance and improve productivity. Since this chemical behaviour cannot be predicted from first principles it follows, there is also an ongoing need for accurate experimental data. The advancements made in recent years in the capabilities of sophisticated analytical and measurement equipment have made it possible to develop new experimental techniques for the direct determination of phase equilibria in low order and complex multicomponent slag systems. In addition, the development of powerful computer modelling tools makes it possible to provide more comprehensive descriptions of the phase chemistry, to present the information in a range of perspectives, and to critically analyse the various types of related thermodynamic and structural information available. This review provides an overview of the types of information that can be used to determine phase equilibria in slag systems, analyses the influence of uncertainty and the relative importance of these types of data, and describes the advantages and limitations of the various experimental techniques that can be employed to obtain this information. Examples of recent studies are provided that demonstrate how an integrated approach to the determination of phase equilibria in complex systems, involving the use of targeted experimental studies and systematic thermodynamic model development, can lead to a better utilisation of the current research capabilities and resources, and more accurate descriptions of these systems.

Keywords

SLAGS PHASE EQUILIBRIA EXPERIMENTAL TECHNIQUES

Get full access to this article

View all access options for this article.

References

Bragg

and Claringbull

G. F.

: ‘Crystal structures of minerals’; 1965, London, Bell.

Klein

: ‘Manual of mineral science’, 22nd edn; 2002, New York, Wiley.

Bowen

N. L.

and Schairer

J. F.

: Am. J. Sci, 1932, 24, (5), 177–213.

Rankin

G. A.

and Wright

F. E.

: Am. J. Sci, 1915, 229, 1–79.

Rankin

G. A.

and Merwin

H. E.

: J. Am. Chem. Soc., 1916, 38, 268–288.

Rankin

G. A.

and Merwin

H. E.

: Am. J. Sci, 1918, 45, 301–325.

Muan

and Osborne

E. F.

: ‘Phase equilibria among oxides in steelmaking’; 1965, Reading, MA, Addison-Wesley.

White

: in ‘Phase diagrams: materials science and technology’, (ed. Alper

A. M.

), Vol. 6-11, 21–66; 1970, New York, Academic Press.

Muan

: in ‘Refractory materials’, Vol. 5-1, ‘High temperature oxides’, (ed. Alper

A. M.

), 315–346; 1970, New York, Academic Press.

10.

Kingery

W. D.

, Bowen

H. K.

and Uhlmann

D. R.

: ‘Introduction to ceramics’; 1976, New York, Wiley.

11.

Levin

E. M.

, Robbins

C. R.

and MacMurdie

H. F.

: ‘Phase diagrams for ceramists’; 1964, Columbus, OH, American Ceramic Society.

12.

VDEh: ‘Slag atlas’, 2nd edn; 1995, Dusseldorf, Verlag Stahleisen.

13.

Richardson

F. D.

: ‘The physical chemistry of melts in metallurgy’; 1974, Washington, DC, Academic Press.

14.

Turkdogan

E. T.

: ‘The physical chemistry of high temperature technology’; 1980, New York, Academic Press.

15.

Takeda

and Yazawa

: in ‘Productivity and technology in the metallurgical industries’, (ed. Koch

and Taylor

J. C.

), 227–240; 1989, Warrendale, PA, The Minerals, Metals and Materials Society.

16.

Takeda

, Kanesaka

, Hino

and Yazawa

: Proc. Conf. Pyrometallurgy ‘95, London, UK, July 1995, IMM, 285–294.

17.

Chang

Y. A.

and Chen

S.-L.

: in ‘Advanced physical chemistry for process metallurgy’, (ed. Sano

et al), 514; 1997, San Diego, CA, Academic Press.

18.

Sano

: in ‘Advanced physical chemistry for process metallurgy’, (ed. Sano

et al), 45–86; 1997, San Diego, CA, Academic Press.

19.

Pelton

A. D.

: in ‘Advanced physical chemistry for process metallurgy’, (ed. Sano

et al), 87–120; 1997, San Diego, CA, Academic Press.

20.

Pelton

A. D.

: in ‘Phase transformations in materials’, (ed. Kostortz

), 75–80; 2001, Weinheim, Wiley-VCH.

21.

Kubaschewski

and Alcock

C. B.

: ‘Metallurgical thermochem-istry’, 5th edn; 1979, Oxford, Pergamon Press.

22.

MacChesney

J. B.

and Rosenberg

P. E.

: in ‘Phase diagrams: materials science and technology’, (ed. Alper

A. M.

), Vol. 1, 114.-165; 1970, New York, Academic Press.

23.

Raynor

G. V.

: in ‘Physical metallurgy’, (ed. Cahn

R. W.

and Haasen

), Chap. 7, 309-382; 1970, Amsterdam, North-Holland.

24.

Bunshah

R. F.

(ed.): ‘Physicochemical measurements in metals research’, Vol. IV, Part 1; 1970, New York, Interscience-John Wiley.

25.

Solomons

: in ‘Physicochemical measurements in metals research’, (ed. Bunshah

R. F.

), Vol. IV, Part 2, 35–122; 1970, New York, Interscience-John Wiley.

26.

Rapp

R. A.

and Shores

D. A.

: in ‘Physicochemical measurements in metals research’, (ed. Bunshah

R. F.

), Vol. IV, Part 2, 123–192; 1970, New York, Interscience-John Wiley.

27.

Iwase

, Uchida

, McLean

and Katogi

: Proc. 6th Int. Conf. on ‘Molten slags, fluxes and salts’, Stockholm, Sweden; Helsinki, Finland, June 2000, Royal Institute of Technology (KTH), Paper 27.

28.

Cater

E. D.

: in ‘Physicochemical measurements in metals research’, (ed. Bunshah

R. F.

), Vol. IV, Part 1, 21–90; 1970, New York, Interscience-John Wiley.

29.

Buckler

, Berkowitz-Mattuck

and Little

A. D.

: in ‘Physicochemical measurements in metals research’, (ed. Bunshah

R. F.

), Vol. IV, Part 1, 161–196; 1970, New York, Interscience-John Wiley.

30.

Stolyarova

: Proc. 6th Int. Conf. on ‘Molten slags, fluxes and salts’, Stockholm, Sweden; Helsinki, Finland, June 2000, Royal Institute of Technology (KTH), Paper 28.

31.

Schwertweger

and Turkdogan

R. T.

: in ‘Physicochemical measurements in metals research’, (ed. Bunshah

R. F.

), Vol. IV, Part 1, 321–408; 1970, New York, Interscience-John Wiley.

32.

Norman

J. H.

and Winchell

: in ‘Physicochemical measurements in metals research’, (ed. Bunshah

R. F.

), Vol. IV, Part 1, 131–160; 1970, New York, Interscience-John Wiley.

33.

Buckley

R. A.

: in ‘Physicochemical measurements in metals research’, (ed. Bunshah

R. F.

), Vol. IV, Part 1, 425–454; 1970, New York, Interscience-John Wiley.

34.

Kramer

J. L.

and Raheja

R. R.

: in ‘Physicochemical measure-ments in metals research’, (ed. Bunshah

R. F.

), Vol. IV, Part 1, 457–504; 1970, New York, Interscience-John Wiley.

35.

Welch

J. H.

and Gutt

: J. Am. Ceram. Soc., 1959, 42, 11–15.

36.

Iwasawa

, Ikeda

and Maeda

: Proc. 6th Int. Conf. on ‘Molten slags, fluxes and salts’, Stockholm, Sweden; Helsinki, Finland, June 2000, Royal Institute of Technology (KTH), Paper 24.

37.

Leach

J. S. L.

: in ‘Physicochemical measurements in metals research’, (ed. Bunshah

R. F.

), Vol. IV, Part 1, 197–242; 1970, New York, Interscience-John Wiley.

38.

Huber

and Halley

C. E.

: in ‘Physicochemical measurements in metals research’, (ed. Bunshah

R. F.

), Vol. IV, Part 1, 243–266; 1970, New York, Interscience-John Wiley.

39.

Navrotsky

: Phys. Chem. Miner., 1997, 24, 222–241.

40.

Grieveson

: in ‘Physicochemical measurements in metals research’, (ed. Bunshah

R. F.

), Vol. IV, Part 1, 409–424; 1970, New York, Interscience-John Wiley.

41.

Jak

, Lee

H. G.

and Hayes

P. C.

: Korean IMM J., 1995, 1, 1–8.

42.

Ding

and Olsen

: MetalL Trans. B, 1996, 27B, 5–17.

43.

Rait

and Olsen

S. E.

: Scand J. MetalL, 1999, 28, 53–58.

44.

Rait

and Olsen

S. E.

: Proc. 6th Int. Conf. on ‘Molten slags, fluxes and salts’, Stockholm, Sweden; Helsinki, Finland, June 2000, Royal Institute of Technology (KTH), Paper 18.

45.

Flynn

J. H.

: J. Therm. Anal, 1988, 34, 367.

46.

Perepezko

J. H.

: in ‘Thermal analysis in metallurgy’, (ed. Shull

R. D.

and Joshi

), 121–153; 1992, Warrendale, PA, TMS.

47.

Shull

R. D.

: in ‘Thermal analysis in metallurgy’, (ed. Shull

R. D.

and Joshi

), 95–119; 1992, Warrendale, PA, TMS.

48.

Tromel

and Gorl

: Arch. Eisenhuttenwes., 1963, 34, 595–599.

49.

Gorl

, Oeters

and Scheel

: Arch. Eisenhuttenwes., 1966, 37, 441–445.

50.

Kuxman

and Fischer

: Erzmetall, 1974, 27, 533–537.

51.

Tsukihashi

and Kimura

: Proc. 6th Int. Conf. on ‘Molten slags, fluxes and salts’, Stockholm, Sweden; Helsinki, Finland, June 2000, Royal Institute of Technology (KTH), Paper 22.

52.

Rao

Y. K.

: in ‘Phase diagrams: materials science and technology’ (ed. Alper

A. M.

), Vol. 6, 1–43; 1970, New York, Academic Press.

53.

Pelton

A. D.

: in ‘Physical metallurgy’, (ed. Cahn

R. W.

and Haasen

), 4th edn, Chap. 6, 472-533; 1970, Amsterdam, North-Holland.

54.

Hillert

: ‘Phase equilibria, phase diagrams, and phase transformations: their thermodynamic basis’; 1998, Cambridge, Cambridge University Press.

55.

Yeh

H. C.

: in ‘Phase diagrams: materials science and technology’ (ed. Alper

A. M.

), Vol. 6-11, 168–198; 1970, New York, Academic Press.

56.

Pelton

A. D.

: J. Phase Equilib., 1995, 16, (6), 501–503.

57.

Dinsdale

A. T.

, Hodgson

S. M.

, Barry

T. I.

and Taylor

J. R.

: in ‘Computer software in chemical and extractive metallurgy’, 31-44; 1989, New York, Pergamon Press.

58.

Gisby

Dinsdale, J.

, Gibbon

and Taylor

: Proc. 6th Int. Conf. on ‘Molten slags, fluxes and salts’, Stockholm, Sweden; Helsinki, Finland, June 2000, Royal Institute of Technology (KTH), Paper A31, available at: www.npl.co.uk/npl/cmmt/mtdata/mtdata.html

59.

Gaye

, Lehmann

, Rocaois

and Ruby-Meyer

: Proc. 6th Int. Conf. on ‘Molten slags, fluxes and salts’, Stockholm, Sweden; Helsinki, Finland, June 2000, Royal Institute of Technology (KTH), Paper 214.

60.

Andersson

J. O.

, Helander

, Hoglund

, Shi

and Sundman

: Calphad, 2002, 26, 273–312.

61.

Bale

C. W.

, Chartrand

, Degterov

S. A.

, Eriksson

, Hack

, Mahfoud

R. B.

, Melancon

, Pelton

A. D.

and Petersen

: Calphad, 2002, 26, (2), 189–228.

62.

von Fischer

W. A.

and Hoffmann

A. H.

: Arch. Eisenhuttenwes., 1956, 27, (5), 343–346.

63.

Atlas

L. M.

and Sumida

W. K.

: J. Am. Ceram. Soc., 1958, 41, (5), 150–160.

64.

Novokhatskii

I. A.

, Belov

B. F.

, Gorokh

A. V.

and Savinskaya

A. A.

: Russ. J. Phys. Chem., 1965, 39, (11), 1498–1500.

65.

Rosenbach

and Schmitz

J. A.

: Arch. Eisenhuttenwes., 1974, 45, 843–847.

66.

Hay

, McIntosh

A. B.

, Rait

and White

R. J.

: J. West Scot. Iron Steel Inst., 1936/193 7, 44, 85–92.

67.

Oelsen

and Heynert

: Arch. Eisenhuttenwes., 1955, 26, 567–575.

68.

Jak

, Degterov

S. A.

, Hayes

P. C.

and Pelton

A. D.

: ‘Current optimisation on the system Al—Ca—Fe—K—Na—O—Si’, unpublished, CRCT, Montreal, Que., Canada, 2003.

69.

Muan

: in ‘Phase diagrams: materials science and technology’ (ed. Alper

A. M.

), Vol. 6-11, 1–19; 1970, New York, Academic Press.

70.

Jak

, Zhao

, Harvey

and Hayes

P. C.

: Metall Trans. B, 2003, 34B, 383–397.

71.

Jak

, Degterov

, Hayes

P. C.

and Pelton

A. D.

: Proc. 5th Int. Symp. on ‘Metallurgical slags and fluxes’, 621–628; 1997, Warrendale, PA, Iron and Steel Society.

72.

Jak

, Degterov

, Zhao

, Pelton

A. D.

and Hayes

P. C.

: Metall Trans. B, 2001, 31B, 621–630.

73.

Jak

, Zhao

, Degterov

, Pelton

A. D.

and Hayes

P. C.

: Proc. Int. Conf. on ‘Lead/zinc’, Calgary, Alta, Canada, August 1998, CIM, 313–333.

74.

Jak

, Zhao

and Hayes

P. C.

: Proc. 6th Int. Conf. on ‘Molten slags, fluxes and salts’, Stockholm, Sweden; Helsinki, Finland, June 2000, Royal Institute of Technology (KTH), Paper 20.

75.

Frohberg

M. G.

, Caune

and Kapoor

M. L.

: Arch. Eisenhuttenwes., 1973, 44, 585–588.

76.

Kohsaka

, Sato

and Yokokawa

: J. Chem. Thermodyn., 1979, 11, 547–551.

77.

Ravaine

, Azandegbe

and Souquet

J. L.

: Vic. Ind:, 1975, 40, 333–340.

78.

Yamaguchi

, Imai

and Goto

K. S.

: Scand J. Metall., 1982, 11, 263–364.

79.

Neudorf

D. A.

and Elliot

J. F.

: Metall Trans. B, 1980, 11B, 607–614.

80.

Zaitsev

A. I.

, Shelkova

N. E.

, Lyakishev

N. P.

and Mogutnov

B. M.

: Phys. Chem. Chem. Phys., 1999, 1, (8), 1899–1907.

81.

Tsukihashi

and Sano

: Tetsu-to-Hagane, 1985, 71, (1-2), 815–822.

82.

Schairer

J. F.

and Yoder

H. S.,

Jr : in ‘Carnegie Institution of Washington yearbook’, No. 69„ 160-163; 1969-70, Washington, DC, Carnegie Institution of Washington.

83.

Morey

G. W.

and Bowen

N. L.

: J. Phys. Chem., 1924, 28, 1167–1179.

84.

Kracek

F. C.

: J. Phys. Chem., 1930, 34, (12), 1583–1598.

85.

D'Ans

and Loeffler

: Z. Anorg. Allg. Chem., 1930, 191, 1–35.

86.

Willgallis

: Glastech. Ber., 1969, 42, (12), 506–509.

87.

Bowen

N. L.

, Schairer

J. F.

and Posnjak

: Am. J. Sci., 1933, 26, 191–284.

88.

Bowen

N. L.

and Schairer

J. F.

: Am. J. Sci., 1933, 25, (7-8), 273–297.

89.

Zhao

, Jak

and Hayes

: ‘Liquidus in the “FeO”—CaO--5i02 system in equilibrium with metallic iron’, in PhD thesis, B. Zhao, University of Queensland, Brisbane, QLD, Australia, 1999.

90.

Reed

J. S.

: ‘Introduction to the principles of ceramic processing’, 2nd edn; 1995, New York, Wiley.

91.

Caryll

D. B.

and Ward

R. G.

: J. Iron Steel Inst., 1967, 205, 28–31.

92.

Ilyushechkin

, Hayes

P. C.

and Jak

: Metall Trans. B, 2004, 35B, 203–215.

93.

Guterierrrez-Miravette

: in ‘Rapid solidification technology: an engineering guide’, (ed. Srivatsan

T. S.

and Sudarshan

T. S.

), 3–70; 1993, Lancaster, PA, Technomic Publ.

94.

Jones

: ISIJ Int., 1995, 35, (6), 751–756.

95.

Hansson

, Zhao

, Hayes

P. C.

and Jak

, Metall Mater. Trans. B. 2005, 36B, 137–193.

96.

Pelton

A. D.

: Proc. J. M. Toguri Symp. (Fundamentals of metallurgical processing), Ottawa, Ont., Canada, August 2000, CIM, 45–56.

97.

Jak

, Zhao

and Hayes

P. C.

: Metall Trans. B, 2000, 31B, 1195–1201.

98.

Jak

, Zhao

and Hayes

P. C.

: Metall Trans. B, 2002, 33B, 877–890.

99.

Jak

, Zhao

and Hayes

P. C.

: Metall Trans. B, 2002, 33B, 865–876.

100.

Jak

and Hayes

P. C.

: Metall Trans. B, 2002, 33B, 817–825.

101.

Jak

and Hayes

P. C.

: Metall Trans. B, 2003, 34B, 369–382.

102.

Roghani

, Jak

and Hayes

P. C.

: Metall Trans. B, 2003, 34B, 173–182.

103.

Roghani

, Jak

and Hayes

P. C.

: Metall Trans. B, 2002, 33B, 827–838.

104.

Roghani

, Jak

and Hayes

P. C.

: Metall Trans. B, 33B, 839–849.

105.

Jak

, Zhao

and Hayes

P. C.

: Metall Trans. B, 2000, 31B, 1195–1201.

106.

Itoh

and Azakami

: Metall. Rev. MMIJ, 1993, 10, 113–133.

107.

Claude

J. M.

, Zanne

, Gleitzer

and Aubry

: Mem. Sci. Rev. Metall., 1977, T740, 229–237.

108.

Lykasov

A. A.

, Dyachoock

V. V.

, Pavlovskaya

M. S.

and Popova

T. V.

: Inorg. Mater., 1991, 27, (3), 539–543.

109.

Lykasov

A. A.

, Dyachuk

V. V.

and Pavlovskaya

M. S.

: Neorg. Mater., 1991, 27, (10), 2153–2156.

110.

Degterov

S. A.

, Jak

, Hayes

P. C.

and Pelton

A. D.

: Metall Trans. B, 2001, 32B, 643–657.

111.

Jak

, Degterov

S. A.

, Pelton

A. D.

and Hayes

P. C.

: Metall Trans. B, 2001, 32B, 793–800.