The effects of temperature, dwell and environment on the fatigue crack growth behaviour of two nickel base turbine disc superalloys RR1000 and Udimet 720Li are presented in the present paper. Fatigue tests were carried out at room temperature in air using a 20 Hz sinusoidal loading waveform and at elevated temperatures of 650 and 725°C in both air and vacuum environments using a trapezoidal loading waveform with dwell times at a maximum load of 1 or 20 s. The fatigue crack propagation resistance of both materials is rationalised in terms of the influence of microstructure as well as the effects of alloy chemistry.
HideN. J., HendersonM. B. and ReedP. A. S.: ‘Effects of grain and precipitate size variation on creep-fatigue behaviour of Udimet 720Li in both air and vacuum’, in ‘Superalloys 2000’, (ed. PollockT. M., KissingerR. D., BowmanR. R.., 495–503; 2000, Warrendale, PA, The Minerals, Metals and Materials Society (TMS).
2.
LerchB. A., JayaramanN. and AntolovichS. D.: ‘A study of fatigue damage mechanisms in Waspaloy from 25 to 800°C’, Mater. Sci. Eng., 1984, 66, 151–165.
3.
MerrickH. F. and FloreenS.: ‘The effects of microstructure on elevated temperature crack growth in nickel-base alloys’, Metall. Trans. A, 1978, 9A, 231–236.
4.
HuntD. W., SkeltonD. K. and KnowlesD. M.: ‘Microstructural stability and crack growth behaviour of a polycrystalline nickel-base superalloy’, in ‘Superalloys 2000’, (ed. PollockT. M., KissingerR. D., BowmanR. R.., 795–802; 2000, Warrendale, PA, The Minerals, Metals and Materials Society (TMS).
5.
GaydaJ. and MinerR. V.: ‘The effect of microstructure on 650°C fatigue crack growth in P/M Astroloy’, Metall. Trans. A, 1983, 14A, 2301–2308.
6.
GaydaJ. and MinerR. V.: ‘Fatigue crack initiation and propagation in several nickel-base superalloys at 650°C’, Int. J. Fatigue, 1983, 5, 135–143.
7.
LynchS. P., RadtkeT. C., WicksB. J. and ByrnesR. T.: ‘Fatigue crack growth in nickel-based superalloys at 500–700°C. I: Waspaloy’, Fatigue Fract. Eng. Mater. Struct., 1994, 17, 297–311.
8.
TongJ. and BryneJ.: ‘Effects of frequency on fatigue crack growth at elevated temperature’, Fatigue Fract. Eng. Mater. Struct., 1999, 22, 185–193.
9.
TohS. F. and RainforthW. M.: ‘Fatigue of a nickel base superalloy with bimodal grain size’, Mater. Sci. Technol., 1996, 12, 1007–1014.
10.
Subramanya SarmaV., SundararamanM. and PadmanabhanK. A.: ‘Effect of γ′ size on room temperature low cycle fatigue behaviour of a nickel base superalloy’, Mater. Sci. Technol., 1998, 14, 669–675.
11.
PangH. T. and ReedP. A. S.: ‘Fatigue crack initiation and short crack growth in nickel-base turbine disc alloys—the effects of microstructure and operating parameters’, Int. J. Fatigue, 2003, 25, 1089–1099.
12.
PangH. T. and ReedP. A. S.: ‘Microstructure effects on high temperature fatigue crack initiation and short crack growth in turbine disc nickel-base superalloy Udimet 720Li’, Mater. Sci. Eng. A, 2007, A448, 67–79.
13.
PangH. T. and ReedP. A. S.: ‘Effects of microstructure on room temperature fatigue crack initiation and short crack propagation in Udimet 720Li Ni-base superalloy’, Int. J. Fatigue, 2009, 30, 2009–2020.
14.
PangH. T. and ReedP. A. S.: ‘Microstructure variation effects on room temperature fatigue threshold and crack propagation in Udimet 720Li Ni-base superalloy’, Fatigue Fract. Eng. Mater. Struct., 2009, 32, 685–701.
15.
TongJ., DalbyS., ByrneJ., HendersonM. B. and HardyM. C.: ‘Creep, fatigue and oxidation in crack growth in advanced nickel base superalloys’, Int. J. Fatigue, 2001, 23, 897–902.
16.
DalbyS. and TongJ.: ‘Crack growth in a new nickel-based superalloy at elevated temperature Part I Effects of loading waveform and frequency on crack growth’, J. Mater. Sci., 2005, 40, 1217–1228.
17.
TongJ., DalbyS. and ByrneJ.: ‘Crack growth in a new nickel-based superalloy at elevated temperature. Part III. Characterisation’, J. Mater. Sci., 2005, 40, 1237–1243.
18.
BakerS.: ‘An investigation into static crack growth and dwell-fatigue in the nickel based superalloy RR1000 at elevated temperatures’, ‘MRes thesis, University of Birmingham, Birmingham, UK’; 2011.
19.
KnowlesD. M. and HuntD. W.: ‘The influence of microstructure and environment on the crack growth behavior of powder metallurgy nickel superalloy RR1000’, Metall. Mater. Trans. A, 2002, 33A, 3165–3172.
20.
BacheM. R., JonesJ. P., DrewG. L., HardyM. C. and FoxN.: ‘Environment and time dependent effects on the fatigue response of an advanced nickel based superalloy’, Int. J. Fatigue, 2009, 31, 1719–1723.
21.
TuranD., HuntD. and KnowlesD. M.: ‘Dwell time effect on fatigue crack growth of RR1000 superalloy’, Mater. Sci. Technol., 2007, 23, 183–188.
22.
YuS. Y., LiH. Y., HardyM. C., McDonaldS. A. and BowenP.: ‘Mechanisms of dwell fatigue crack growth in an advanced nickel disc alloy RR1000’14, ‘EUROSUPERALLOYS 2014 – 2nd European Symposium on Superalloys and their Applications, MATEC Web of Conferences’, ; 2014.
23.
EverittS., StarinkM. J. and ReedP. A. S.: ‘Temperature and dwell dependence of fatigue crack propagation in various heat treated turbine disc alloys’, in ‘Superalloys 2008’, (ed. ReedR. C., GreenK. A., CaronP.., 741–750; 2008, Warrendale, PA, The Minerals, Metals and Materials Society (TMS).
24.
OnofrioG., OsinkoluG. A. and MarchionniM.: ‘Fatigue crack growth of UDIMET 720 Li superalloy at elevated temperature’, Int. J. Fatigue, 2001, 23, 887–895.
25.
TuckerA. M., HendersonM. B., WilkinsonA. J., HideN. J. and ReedP. A. S.: ‘High temperature fatigue crack growth in powder processed nickel based superalloy U720Li’, Mater. Sci. Technol., 2002, 18, 349–353.
26.
HelmD. and RoderO.: ‘Influence of long term exposure in air on microstructure, surface stability and mechanical properties of UDIMET 720Li’, in ‘Superalloys 2000’, (ed. PollockT. M., KissingerR. D., BowmanR. R.., 487–493; 2000, Warrendale, PA, The Minerals, Metals and Materials Society (TMS).
27.
LiH. Y., FiskJ., LimL. B., WilliamsS. and BowenP.: ‘Thresholds of time dependent intergranular crack growth in a nickel disc alloy Alloy 720Li’14, ‘EUROSUPERALLOYS 2014 – 2nd European Symposium on Superalloys and their Applications, MATEC Web of Conferences’, ; 2014.
28.
PangH. T.: ‘Effect of microstructure variation on turbine disc fatigue lives’, ‘PhD thesis, University of Southampton, Southampton, UK’; 2003.
29.
HuntD., ‘University of Cambridge, UK, personal communications’; 1998.
30.
HessellS. J., VoiceW., JamesA. W., BlackhamS. A., SmallC. J., WinstoneM. R. and Rolls-Roycc plc: ‘Nickel alloy for turbine engine components’, ‘US Patent 5897718’; 1999.
31.
ASTM International: ‘ASTM Standard E647-00: standard test method for measurement of fatigue crack growth rates’; 2000, West Conshohocken, PA, ASTM International.
32.
ASTM International: ‘ASTM Standard E1820-13: standard test method for measurement of fracture toughness’; 2013, West Conshohocken, PA, ASTM International.
33.
SureshS.: ‘Fatigue of materials’, 2nd edn, ; 1998, Cambridge University Press.
34.
ReedP. A. S., GaleW. F. and KingJ. E.: ‘Intrinsic thresholds in polycrystalline Udimet 720’, Mater. Sci. Technol., 1993, 9, 281–287.
35.
HicksM. A. and KingJ. E.: ‘Temperature effects on fatigue thresholds and structure sensitive crack growth in a nickel-base superalloy’, Int. J. Fatigue, 1983, 5, 67–74.
36.
KingJ. E.: ‘Fatigue crack propagation in nickel-base superalloys: effects of microstructure, load ratio, and temperature’, Mater. Sci. Technol., 1987, 3, 750–764.
37.
HardyM. C., ZirbelB., ShenG. and ShankarR.: ‘Developing damage tolerance and creep resistance in a high strength nickel alloy for disc applications’, in ‘Superalloys 2004’, (ed. GreenK. A., PollockT. M., HaradaH.., 83–90; 2004, Warrendale, PA, The Minerals, Metals and Materials Society (TMS).
38.
KrakowR., RandelzhoferP., ‘at the Chair of Metals Science and Technology, University of Erlangen-Nürnberg, Germany, personal communications’; 2011.
39.
WilcockI. M., ColeD. G., BrooksJ. W. and HardyM. C.: ‘Creep/fatigue behaviour of P/M disc alloys’, ‘Charles Parsons Turbine Conference 2003’, 749–764; 2003, Dublin, Institute of Materials Minerals and Mining.
40.
EverittS., StarinkM. J., PangH. T., WilcockI. M., HendersonM. B. and ReedP. A. S.: ‘A comparison of high temperature fatigue crack propagation in various subsolvus heat treated turbine disc alloys’, Mater. Sci. Technol., 2007, 23, 1419–1423.
41.
KruegerD. D., AntolovichS. D. and Van StoneR. H.: ‘Effects of grain size and precipitate size on the fatigue crack growth behavior of alloy 718 at 427°C’, Metall. Trans. A, 18A, 1987, 18A, 1431–1449.
42.
KellerR., ZiehinskiW. and GerberichW. W.: ‘On the onset of low-energy dislocation substructures in fatigue: grain size effects’, Mater. Sci. Eng. A, 1989, Al13, 267–280.
