The refinement of inclusions in molten steel induced by a continuous electric current pulse was investigated at 1823 K. The results revealed that due to the application of electric current, the melted sulphide inclusions in molten steel were refined. Analysed from the thermodynamic theory, the refinement mechanism was ascribed to the decrease in the system free energy that resulted from the formation of the refined sulphide inclusions in molten steel at 1823 K. Hence, the electric current pulse treatment may be a new method to refine inclusions in molten metallic materials in the future.
HoP. S. and KwokT.: ‘Electromigration in metals’, Rep. Prog. Phys., 1989, 52, 301–348.
4.
SprecherA. F., MannantS. L. and ConradH.: ‘On the mechanisms for the electroplastic effect in metals’, Acta Metall., 1986, 34, 1145–1162.
5.
MisraA. K.: ‘A novel solidification technique of metals and alloys: under the influence of applied potential’, Metall. Trans. A, 1985, 16, 1354–1355.
6.
LiL. Z., ZongY. B., GuiH., SongJ. T., ZhangR. and LangD. Q.: ‘Electropulse effect on macro solidification structure of HRB335 steel’, J. Univ. Sci. Technol. Beijing, 2004, 26, 478–481.
7.
HongP., WangH. C., LiX., LiJ., LiaoZ. Y. and QianZ. X.: ‘Effect of pulsed electric field on solidification process of Fe–CP system alloy’, Chin. J. Process Eng., 2011, 11, 79–84.
8.
ZhouY. Z., ZhangW., WangB. Q., HeG. H. and GuoJ. D.: ‘Grain refinement and formation of ultrafine-grained microstructure in a low-carbon steel under electropulsing’, J. Mater. Res., 2002, 17, 2105–2111.
9.
ZhangW., SuiM. L., HuK. Y., LiD. X., GuoX. N., HeG. H. and ZhouB. L.: ‘Formation of nanophases in a Cu–Zn alloy under high current density electropulsing’, J. Mater. Res., 2000, 15, 2065–2068.
10.
ZhouY. Z., ZhangW., GuoJ. D. and HeG. H.: ‘Diffusive phase transformation in a Cu–Zn alloy under rapid heating by electropulsing’, Philos. Mag. Lett., 2004, 84, 341–348.
11.
WangX. L., GuoJ. D., WangY. M., WuX. Y. and WangB. Q.: ‘Segregation of lead in Cu–Zn alloy under electric current pulses’, Appl. Phys. Lett., 2006, 89, 061910.
12.
DaiW. B. and WangX. L.: ‘Effect of electric current on the inclusions in a Cu–Zn alloy’, Mater. Trans., 2010, 51, 892–895.
13.
ZhangX. F., LuW. J. and QinR. S.: ‘Removal of MnS inclusions in molten steel using electropulsing’, Scr. Mater., 2013, 69, 453–456.
14.
ZhangL. F. and ThomasB. G.: ‘State of the art in evaluation and control of steel cleanliness’, ISIJ Int., 2003, 43, 271–291.
15.
ZhuM. Y.: ‘Modern metallurgy’, in ‘Ferrous metallurgy part’1. 1st edn, 149–174; 2010, Beijing, China, Metallurgical Industry Press.
16.
ChenJ. X.: ‘Handbook of common graphs and tables for metallurgy’, 2nd edn, 269; 2010, Beijing, China, Metallurgical Industry Press.
17.
LideD. R.: ‘CRC handbook of chemistry and physics’1991–1992. 72nd edn, 4–50; 1991, Boston, Chemical Rubber Publishing Company.
18.
ZhangB. W.: ‘Theoretical study and its application on the general dynamics of inclusion particle in metallurgical melts’, PhD thesis, 25; 2003, Shanghai, China, University of Shanghai.
19.
DolinskyY. and ElperinT.: ‘Thermodynamics of phase transitions in current-carrying conductors’, Phys. Rev. B, 1993, 47, 14778–14785.
20.
QinR. S., YanH. C., HeG. H. and ZhouB. L.: ‘Exploration on the fabrication of bulk nanocrystalline materials by direct-nanocrystallizing method’, Chin. J. Mater. Res., 1995, 9, 219–222.
21.
DanielewskiM. and MrowecS.: ‘Defect structure and transport properties of manganous sulphide’, Solid State Ionics, 1985, 17, 29–39.
