Nb–V additions clearly affected the precipitation state, respective phase transformations and final microstructure, and in turn, resulting mechanical properties of an intercritically annealed transformation induced plasticity sheet steel. As the precipitation hardening played a limited role in the overall strengthening, the grain refinement was the prevailing strengthening mechanism associated with the addition of the Nb–V microalloying to a basic TRIP780 composition. In addition to this, the microstructural changes, resulting from the addition of microalloying, lowered the stability of retained austenite, which decreased the elongation of the steel. Nevertheless, using this microalloying concept, an exceptional product of RmxA80 exceeding 16 000 MPa could be achieved.
De CoomanBC: ‘Structure-properties relationship in TRIP steels containing carbide-free bainite’, Curr. Opin. Solid State Mater. Sci., 2004, 8, 285–303.
2.
KrizanD: ‘TRIP steels: advanced high strength multiphase steels for automotive applications’, Proc. Int. Conf. on ‘COM-MAT-TECH’, Trnava, Slovakia, October 2006, MTF STU,659–668.
3.
TraintS, PichlerA, SierlingerR, PauliH and WernerEA: ‘Low-alloyed TRIP-steels with optimized strength, forming and welding properties’, Steel Res. Int., 2006, 77, 641–649.
4.
KrizanD, TraintS, SierlingerR, PauliH, BlaimscheinM and PichlerA: ‘Customer oriented development and optimization of cold rolled intercritically annealed multiphase TRIP sheet steels’, Proc. 2nd Int. Conf. on ‘Steels in cars and trucks’, Wiesbaden, Germany, June 2008, VDEH,26–33.
5.
KimMS, KwakJH, KimJS, LiuYH, GaoN and TangN.-Y: ‘Galvanizability of advanced high-strength steels 1180TRIP and 1180CP’, Metall. Mater. Trans. A, 2009, 40A, 1903–1910.
6.
HausmannK, KrizanD, Spiradek-HahnK, PichlerA and WernerE: ‘The influence of Nb on transformation behavior and mechanical properties of TRIP-assisted bainitic–ferritic sheet steels’, Mater. Sci. Eng. A, 2013, A588, 142–150.
7.
BachmaierA, HausmannK, KrizanD and PichlerA: ‘Development of TBF steels with 980 MPa tensile strength for automotive applications: microstructure and mechanical properties’, Proc. Int. Symp. on ‘New developments in advanced high-strength sheet steels’, Vail, CO, USA, June 2013, AIST, Paper 15, 131–139.
8.
YiHL, LeeKY, LimJH and BhadeshiaHKDH: ‘Spot weldability of δ-TRIP steels with containing 0·4 wt- C’, Sci. Technol. Weld. Join., 2010, 15, 619–624.
9.
JungGS, LeeKY, KimJH and BhadeshiaHKDH: ‘Spot weldability of TRIP assisted steels with high carbon and aluminium contents’, Sci. Technol. Weld. Join., 2012, 17, 92–98.
10.
ZhangM, FuRY, CaoD, WanZ, WuM, KrizanD, LinL and De CoomanBC: ‘Development of the micro-alloyed TRIP steels and properties of their laser welded blanks’, Proc. HSLA 2005 ISUG Joint Conf., Sanya, China, November 2005, The Chinese Society for Metals, 754–758.
11.
ScottC, GavardL, DeRoA, EwertzT and MaiwaldT: ‘New metallurgy for microalloyed TRIP steels’, Final report no. EUR 22391, Research Found for Coal and Steel, Brussels, Belgium, 2007.
12.
PerrardF and ScottC: ‘Vanadium precipitation during intercritical annealing in cold rolled TRIP steels’, ISIJ Int., 2007, 47, 1168–1177.
13.
De MeyerM, VanderschuerenD and De CoomanBC: ‘The influence of the substitution of Si by Al on the properties of cold rolled C–Mn–Si TRIP steels’, ISIJ Int., 1999, 39, 813–822.
14.
TraintS, PichlerA. HauzenbergerK, StiasznyP and WernerE: ‘Influence of silicon, aluminium, phosphorus and copper on the phase transformations of low alloyed TRIP-steels’, Proc. Int. Conf. GRIPS on ‘TRIP-aided high strength ferrous alloys’, GRIPS, Ghent, Belgium, June 2002, Paper TRIP16, 121–128.
KrizanD and De CoomanBC: ‘Mechanical properties of TRIP steels microalloyed with Ti’, Metall. Mater. Trans. A, 2014, 45A, 3481–3492.
17.
LePeraFS: ‘Improved etching technique to emphasize martensite and bainite in high-strength dual-phase steel’, J. Met., 1980, 32, (3), 38–39.
18.
DysonDJ and HolmesB: ‘Effect of alloying additions on the lattice parameter of austenite’, J. Iron Steel Inst., 1970, 208, 469–474.
19.
ISO: ‘Metallic materials – tensile testing, Part 1, Method of test at room temperature’, ISO 6982-1:2009, ISO, Geneva, Switzerland.
20.
KarmakarA, KunduS, RoyS, NeogyS, SrivastavaD and ChakrabartiD: ‘Effect of microalloying elements on austenite grain growth in Nb–Ti and Nb–V steels’, Mater. Sci. Technol., 2014, 30, 653–664.
21.
Andrade-CarozzoV and JacquesPJ: ‘Interactions between recrystallization and phase transformations during annealing of cold rolled Nb-added TRIP-aided steels’, Mater. Sci. Forum, 2007, 539–543, 4649–4654.
22.
PichlerA, HebesbergerT, TraintS, TraglE, KurzT, KrempaszkyC, TsipouridisP and WernerE: ‘Advanced high strength thin sheet grades: improvement of properties by microalloying assisted microstructure control’, Proc. Int. Symp. on ‘Niobium microalloyed sheet steel for automotive applications’, Araxa, Brazil, December 2005, Paper 245, TMS, 245–274.
23.
OhlertJ, BleckW and HulkaK: ‘Control of microstructure in TRIP steels by niobium’, Proc. Int. Conf. on ‘TRIP-aided high strength ferrous alloys’, Ghent, Belgium, June 2002, Paper TRIP45, GRIPS, 199–206.
24.
KrizanD and De CoomanBC: ‘Analysis of the strain-induced martensitic transformation of retained austenite in cold rolled micro-alloyed TRIP steel’, Steel Res. Int., 2008, 79, 513–522.
25.
JungJ. LeeS.-J, KimS and De CoomanBC: ‘Effect of Ti additions on micro-alloyed TRIP steel’, Steel Res. Int., 2011, 82, 857–865.
26.
HallEO: ‘The deformation and ageing of mild steel. III: discussion of results’, Proc. Phys. Soc. B, 1951, 64B, 747–753.
27.
PetchNJ: ‘The cleavage strength of polycrystals’, J. Iron Steel Inst., 1953, 174, 25–28.
28.
TakakiS, TakedaK, NakadaN and TsuchiyamaT: ‘Effect of interstitial impurity on yielding behavior in ferritic iron’, Proc. 1st Int. Conf. on ‘Interstitial alloyed steels’, Pohang, Korea, September 2008, Pohang University of Science and Technology, 107–113.
29.
GladmanT: ‘The physical metallurgy of microalloyed steels’, 1st edn, Chap. 2, ‘Microstructure–property relationship’, 47–57; 1997, London, The Institute of Materials.
