Sage Journals: Discover world-class research

Abstract

Uniaxial tensile tests of a new type of hot rolled Mg–3Sn–1Zn (TZ31) alloy have been investigated within the temperature range of 25 to 200°C. The elongation to failure ϵ_f increases from 21·9 at 25°C to 79·0 at 200°C, while the 0·2 offset yield strength and peak true strength σ_p decrease from 141 to 60 MPa and from 264 to 91 MPa respectively. The thermal stability of globular Mg₂Sn precipitates is beneficial to the strength of the rolled TZ31 alloy at elevated temperatures. However, dynamic recovery and dynamic recrystallisation play an important role in the elevated temperature elongation. Results obtained here can be used as a reference to develop inexpensive new types Mg alloys with potential for applications at elevated temperatures.

Keywords

Magnesium alloy Microstructure Recrystallisation Mechanical properties

Get full access to this article

View all access options for this article.

References

Martin

and Jonas

: ‘Evolution of microstructure and microtexture during the hot deformation of Mg–3 Al’, Acta Mater. , 2010, 58, 4253–4266.

Yang

, Jiang

, Dai

, Xiang

and Pan

: ‘Microstructure and mechanical behaviour of asymmetric extruded Mg–3Al–1Zn alloy sheets’, Mater. Sci. Technol. , 2013, 29, 710–714.

Park

, Kim

, Bae

, Yim

and You

: ‘Improving the mechanical properties of extruded Mg–3Al–1Zn alloy by cold pre-forging’, Scr. Mater. , 2013, 69, 250–253.

Kondori

and Mahmudi

: ‘Impression creep characteristics of a cast Mg alloy’, Metall. Mater. Trans. A , 2009, 40A, 2007–2015.

Pan

, Chen

, Yan

, Su

, Wei

and Fan

: ‘Effects of Zn/Sn mass ratio on microstructure and mechanical properties of Mg–Zn–Sn–Al–Ca alloys’, Mater. Sci. Technol. , 2013, 29, 169–176.

Terbush JR , Stanford

, Nie

and Barnett

: ‘Na partitioning during thermomechanical processing of an Mg–Sn–Zn–Na alloy’, Metall. Mater. Trans. A , 2013, 44A, 5216–5225.

Hasani

and Mahmudi

: ‘Tensile properties of hot rolled Mg–3Sn–1Ca alloy sheets at elevated temperatures’, Mater. Des. , 2011, 32, 3736–3741.

Sasaki

, Oh-ishi

, Ohkubo

and Hono

: ‘Enhanced age hardening response by the addition of Zn in Mg–Sn alloys’, Scr. Mater. , 2006, 55, 251–254.

, Gu

, Lou

and Zheng

: ‘The development of binary Mg–Ca alloys for use as biodegradable materials within bone’, Biomaterials , 2008, 29, 1329–1344.

10.

Luo

, Wang

, Chen

, Liu

, Wang

and Jiang

: ‘Strong strain hardening ability in an as-cast Mg–3Sn–1Zn alloy’, Mater. Lett. , 2013, 94, 51–54.

11.

Sasaki

, Yamamoto

, Honma

, Kamado

and Hono

: ‘A high-strength Mg–Sn–Zn–Al alloy extruded at low temperature’, Scr. Mater. , 2008, 59, 1111–1114.

12.

Gibson

, Fang

, Bettles

and Hutchinson

: ‘The effect of precipitate state on the creep resistance of Mg–Sn alloys’, Scr. Mater. , 2010, 63, 899–902.

13.

Chen

, Zhang

and Sun

: ‘Facile ammonia-induced fabrication of nanoporous NiO films with enhanced lithium-storage properties’, Electrochem. Commun., 2012, 20, 137–140.

14.

Park

and You

: ‘Low-temperature superplasticity of extruded Mg–Sn–Al–Zn alloy’, Scr. Mater. , 2011, 65, 202–205.

15.

, Cui

, Wu

, Li

, Zhan

and Zhang

: ‘Effects of Ce-rich RE additions and heat treatment on the microstructure and tensile properties of Mg–Li–Al–Zn-based alloy’, Mater. Sci. Eng. A , 2011, A528, 2174–2179.

16.

Masoumi

and Pekguleryuz

: ‘Effect of Sr on the texture of rolled Mg–Mn-based alloys’, Mater. Lett. , 2012, 71, 104–107.

17.

Park

, Oh

and Kim

: ‘Dynamic recrystallization of the H- and O-tempered Mg AZ31 sheets at elevated temperatures’, Mater. Sci. Eng. A , 2012, A542, 127–139.

Microstructure and tensile properties of new type of hot rolled Mg–3Sn–1Zn alloy sheet at elevated temperatures

Abstract

Keywords

Get full access to this article

References