In the present work, the method of response surfaces was employed for the purpose of drawing up a mathematical model for the calculation (forecasting) of the thickness of a flame sprayed coating of powdered aluminium on S235JR steel. Experimental work was conducted according to a full central composite design at three levels. The thickness of the coatings made with combinations of input parameters of the procedure according to the experiment plan mentioned was measured in line with the ISO 2064 standard. A mathematical model was derived describing the dependence of the experimentally obtained thickness values on the input parameters of the procedure. The possibility of analysing the influence of the parameters upon the thickness for a certain combination of input parameters has been presented with the use of perturbation plots.
‘Corrosion tests of flame-sprayed coated steel – 19-year report’, AWS C2·14-74, AWS, Miami, FL, USA, 1–31, 1974.
2.
‘Metallized coatings for corrosion control of naval ship structures and components’, National Materials Advisory Board, Committee on Thermal Spray Coatings for Corrosion Control, National Academy Press Washington, DC, USA, 1–174, 1983.
3.
‘Procedure handbook for shipboard thermal sprayed coating applications’, United States Navy David Taylor Research Center, Bethesda, MD, USA, 1–215, 1992.
4.
‘Metal sprayed coatings for corrosion protection aboard naval ships’, MS 2138-A, American Navy Military Standard, 1–40, 1992.
5.
‘Thermal spraying: new construction and maintenance’, CECW-ET Engineer Manual 1110-2-3401, Department of the Army, US Army Corps of Engineers, Washington, DC, USA, 1–88, 1999.
6.
ShresthaS. and SturgeonA.:‘Characteristics and electrochemical corrosion behaviour of thermal sprayed aluminum (TSA) coatings prepared by various wire thermal spray processes’, Proc. EUROCORR 2005, Lisbon, Portugal, September 2005, European Federation of Corrosion, 1–10.
7.
Pombo RodriguezR. M. H., ParedesR. S. C., WidoS. H. and CalixtoA.:‘Comparison of aluminum coatings deposited by flame spray and by electric arc spray’, Surf. Coat. Technol., 2007, 202, (1), 172–179.
8.
PanossianZ., MariacaL., MorcilloM., FloresS., RochaJ., PeñaJ. J., HerreraF., CorvoF., SanchezM., RinconO. T., PridybailoG. and SimancasJ.:‘Steel cathodic protection afforded by zinc, aluminum and zinc/aluminum alloy coatings in the atmosphere’, Surf. Coat. Technol., 2005, 190, (2–3), 244–248.
9.
de RincónO., RincónA., SánchezM., RomeroN., SalasO., DelgadoR., LópezB., UruchurtuJ., MarrocoM. and PanosianZ.:‘Evaluating Zn, Al and Al–Zn coatings on carbon steel in a special atmosphere’, Constr. Build. Mater., 2009, 23, (3), 1465–1471.
10.
ParedesR. S. C., AmicoS. C. and d'OliveiraA. S. C. M.:‘The effect of roughness and pre-heating of the substrate on the morphology of aluminum coatings deposited by thermal spraying’, Surf. Coat. Technol., 2006, 200, (9), 3049–3055.
11.
‘Metallic and other inorganic coatings – review of methods of measurement of thickness’, ISO 3882, ISO, Geneva, Switzerland, 2003.
12.
‘Metallische und andere anorganische Schichten – Definitionen und Festlegungen, die die Messung der Schichtdicke betreffen’, ISO 2064, ISO, Geneva, Switzerland, 1996.
13.
LugscheiderE.:‘Handbuch der thermischen Spritztechnik’, DVS-Verlag, Düsseldorf, Germany, 2002.
14.
‘Merkmale und Prüfung von thermisch gepritzten Schichten’, EN 14923, BSI, London, UK, 2003.
15.
ASM International Handbook Committee: in ‘ASM handbook’, Vol. 5, ‘Surface engineering’; 1994, Materials Park, OH, ASM International.
16.
MontgomeryD. C. and RungerG. C.:‘Applied statistics and probability for engineers’; 2003, New York, Wiley & Sons.
17.
‘Rototec LT 29220’, Castolin Eutectic international S.A., Lausanne, Switzerland, 2000.
18.
‘Test method for sieve analysis of metal powders’, ASTM Standard B214-07, ASTM, West Conshohocken, PA, USA, 1–4, 2007.
19.
‘Inspection certificate 8·1 acc. EN 10204:2004’, Certificate no. 42471, Strojopromet-Zagreb, Zagreb, Croatia, 2009.
20.
MatejkaD. and BenkoB.:‘Plasma spraying of metallic and ceramic materials’; 1989, Bratislava, John Wiley& Sons.
21.
PawlowskiL.:‘The science and engineering of thermal spray coatings’, 2nd edn; New York, John Wiley & Sons, 2007.
22.
‘Preparation of steel substrates before application of paints and related products’, ISO 8501-1, ISO, Geneva, Switzerland, 1–74, 2007.
23.
DavisJ. R.:‘Handbook of thermal spray technology’; 2004, Materials Park, OH, ASM International.
24.
PierlotC., PawlowskiL., BiganM. and ChagnonP.:‘Design of experiments in thermal spraying: a review’, Surf. Coat. Technol., 2008, 202, 4483–4490.
25.
MarkoM., SamardžićI. and KlarićŠ.:‘Application of thermal spraying in railway wagon shafts repairing’, Mater. Metal., Metal., 2008, 47, (3), 279.
26.
GlogovićZ., KožuhZ. and KraljS.:‘A mathematical model for the calculation of the adhesion of a flame sprayed coating of aluminum on S 235 JR steel’, J. Therm. Spray Technol., 2012, 21, (1), 63–76.
27.
GlogovićZ.:‘Effects of oxy-fuel spraying parameters upon properties on applied coating’, PhD thesis, FAMENA, Zagreb, Croatia, 2010.
