The effect of grain space orientation and particle–matrix stress transfer on dislocation movement forces with difference of acting stress components in slip plane in climb direction is discussed. A modified equation for calculation of creep rate of creep resistant steel including M23C6 particles size and spacing is proposed. Small differences of experimental and calculated creep rates are obtained by stress exponent n = 3·65.
HoneycombeRWK: ‘The plastic deformation of metals’, 2nd edn, 10–14; 1985, London, Edward Arnold.
2.
OikawaH, IijimaY:‘Diffusion behaviour of creep resistant steels’in ‘Creep resistant steels’(, AbeF, et al..), 241–266; 2008, Cambridge, Woodhead Publ. Ltd.
3.
AsbyMF: ‘The mechanical effects of a dispersion of a second phase’, Proc. 2nd Int. Conf. on ‘Strength of metals and alloys’, Asilomar, CA, USA, August–September 1970, ASM, 507–541.
4.
HornbogenE: ‘Einfluss von Teilchen einer zweiter Phase aus das Zeitverhalten’, in ‘Festigkeits- und Bruchverhalten bei höheren Temperaturen’, (ed. , DahlW, PitchW, ed), 31–52; 1980, Düsseldorf, Verl. Stahl Eisen.
5.
ArtzE, WilkinsonDS: ‘Threshold stresses for dislocation climb over hard particles: the effect of an attractive interaction’, Acta Metall., 1986, 34, 1893–1898.
6.
RöslerJ, ArtzE: ‘A new model-based creep equation for dispersion strengthened materials’, Acta Metall., 1990, 36, 671–683.
7.
ArtzE: ‘Creep of dispersion strengthened materials: a critical assessment’, Res. Mech., 1991, 31, 399–453.
8.
ČadekJ, ŠustekV, PahutovaM: ‘An analysis of creep data for a 9Cr–1Mo–0·2V (P91 type) steel’, Mater. Sci. Eng. A, 1997, A225, 22–28.
9.
WilshireB, BurtH: ‘Yield stress rationalisation of creep and creep fracture properties’, Scr. Mater., 2005, 53, 909–914.
10.
WhitakerNT, WilshireB: ‘Long term creep life prediction for grade 22 (2·25–1Mo) steels’, Mater. Sci. Technol., 2011, 27, 642–647.
11.
SpigarelliS, CerriE, BianchiP, EvangelistaE: ‘Interpretation of creep behaviour of a 9Cr–Mo–Nb–V–N (T91) steel using threshold stress concept’, Mater. Sci. Technol., 1999, 15, 1433–1440.
12.
SkleničkaV, KuharovaK, DlouhyA, KrejčiJ: ‘Creep beviour and mirostructure of a 9 Cr steel’, in ‘Materials for advanced power engineering. Part I’, (ed. , CoutsoradisD, ed), 435–444; 1994, Dordrecht, Kluwer Ac. Publ.
13.
UleB, NagodeA: ‘A model based equation for 9Cr–1Mo–0·2 V (P91 type) steel)’, Mater. Sci. Technol., 2007, 23, 1367–1374.
14.
UleB, NagodeA: ‘The improved power law, stress dependent, energy-barrier model of 9Cr–1Mo–0·2V steel using short term creep data’, Scr. Mater., 2007, 57, 405–408.
15.
WertmanJ: ‘Theory of steady-state creep based on dislocation climb’, J. Appl. Phys., 1955, 26, 1213–1217.
16.
MartinJW, DohertyRD, CantorB: ‘Stability of microstructure in metallic systems’, 2nd edn, 242–272; 1997, Cambridge, Cambridge University Press.
HaldJ, KorcakovaL: ‘Precipitate stability in creep resistant ferritic steels – experimental investigations and modelling’, ISIJ Int., 2003, 43, 420–427.
19.
GustafsonA, AgreenJ: ‘Possible effect of Co on coarsening of M23C6 carbide and Orowan stress in a 9 Cr steel’, ISIJ Int., 2001, 41, 356–360.
20.
VodopivecF, Skobir-BalantičDA, ŽužekB, JenkoM: ‘Coarsening rate of M23C6 and MC particles in a high chromium creep resistant steel’, Steel Res. Int., to be published.
21.
TaneikeM, KondoM, MorimotoT: ‘Accelerated coarsening of MX carbonitrides in 12 Cr steels during creep deformation’, ISIJ Int., 2001, 41, 111–115.
VodopivecF, Vojvodič-TumaJ, ŠuštaršičB, CelinR, JenkoM: ‘Dependence of accelerated creep rate on carbide particles distribution in martensite for 0·18C–11·5Cr–0·29 V steel’, Mater. Sci. Technol., 2011, 27, 937–942.
24.
ŽužekB, VodopivecF, PodgornikB, JenkoM, GodecM: ‘Calculation of accelerated stationary creep rate activation energy for a steel microstructure with a uniform distribution of carbide particles’, Mater. Technol., 2012, 46, 661–664.
VodopivecF, Skobir-BalantičDA, JenkoM, ŽužekB, GodecM: ‘Nucleation and growth of M23C6 particles in high chromium creep resistant steel’, Mater. Technol., 2012, 46, 633–636.
27.
HuP, YanW, ShaW, WangW, GuoZ, ShanY, YangK: ‘Study of Laves phase in an advanced heat-resistant steel’, Front. Mater. Sci. Chin, 2009, 3, 434–441.
28.
SkobirDA, VodopivecF, JenkoM, SpajićS, MarkoliB: ‘Effect of tempering on the chemical and phase composition of MxCy precipitates in low carbon chromium–molybdenum–vanadium steel’, Z. Metallkd, 2004, 95, 1020–1024.
