The effects of T5 and T6 heat treatments on the microstructure and mechanical properties of extruded Mg–6Zn–1M n alloy were investigated in the present study. The results showed that T5 and T6 treatments could markedly improve the strengths of extruded ZM61 alloy, and the precipitate strengthening effect of double aging was better than that of single aging. The precipitates formed in the T6 treatment were much finer and more dispersive than the ones in the T5 treatment, resulting in stronger precipitation strengthening effect. However, due to additional grain size refinement strengthening effect, the T5 treatment could improve ductility without sacrificing strength over the T6 treatment. Scanning electron microscopy observation and tensile test indicated that different cooling methods after extrusion, such as air cooling and water quenching, had no obvious influence on the microstructure and strengths of extruded and subsequent heat treated Mg–6Zn–1Mn alloys. In addition, the Mn element mainly existed as fine Mn phase particles, which were well dispersed in the matrix. Dispersed Mn particles could be found in rod-like
precipitates, but not in the disc shaped
precipitates.
CaoX, JahaziM, ImmarigeonJP, WallaceW: ‘A review of laser welding techniques for magnesium alloys’,J. Mater. Process. Technol., 2006, 171, (2), 188–204.
3.
YangZ, LiJP, ZhangJX, LorimerGW, RobsonJ: ‘Review on research and development of magnesium alloys’,Acta Metall. Sinica, 2008, 21, (5), 313–328.
4.
XiaoW, ZhuS, EastonMA, DarguschMS, GibsonMA, NieJ.-f: ‘Microstructural characterization of high pressure die cast Mg–Zn–Al–RE alloys’,Mater. Charact., 2012, 65, (0), 28–36.
5.
LuoAA: ‘Recent magnesium alloy development for elevated temperature applications’,Int. Mater. Rev., 2004, 49, (1), 13–30.
6.
WuG.- H, SunM, WangW, DingW.-J: ‘New research development on purification technology of magnesium alloys’,Zhongguo Youse Jinshu Xuebao, 2010, 20, (6), 1021–1031.
7.
TongLB, ZhengMY, XuSW, KamadoS, DuYZ, HuXS, WuK, GanWM, BrokmeierHG, WangGJ, LvXY: ‘Effect of Mn addition on microstructure, texture and mechanical properties of Mg–Zn–Ca alloy’,Mater. Sci. Eng. A, 2011, A528, (10–11), 3741–3747.
8.
YanH, ChenRS, HanEH: ‘A comparative study of texture and ductility of Mg–1·2Zn–0·8Gd alloy fabricated by rolling and equal channel angular extrusion’,Mater. Charact., 2011, 62, (3), 321–326.
9.
MaengDY, KimTS, LeeJH, HongSJ, SeoSK, ChunBS: ‘Microstructure and strength of rapidly solidified and extruded Mg–Zn alloys’,Scr. Mater., 2000, 43, (5), 385–389.
10.
GaoX, NieJF: ‘Structure and thermal stability of primary intermetallic particles in an Mg–Zn casting alloy’,Scr. Mater., 2007, 57, (7), 655–658.
11.
BhameriAK, KattamisTZ: ‘Cast microstructure and fatigue behavior of a grain- refined Mg–Zn–Zr alloy’,Metall. Mater. Trans. B, 1971, 2B, (7), 1869–1874.
12.
BuhaJ, OhkuboT: ‘Natural aging in Mg–Zn(–Cu) alloys’,Metall. Mater. Trans. A, 2008, 39A, (9), 2259–2273.
13.
WeiLY, DunlopGL, WestengenH: ‘Precipitation hardening of Mg–Zn and Mg–Zn–RE alloys’,Metall. Mater. Trans. A, 1995, 26A, (7), 1705–1716.
JunJH, KimJM, ParkBK, KimKT, JungWJ: ‘Effects of rare earth elements on microstructure and high temperature mechanical properties of ZC63 alloy’,J. Mater. Sci., 2005, 40, (9–10), 2659–2661.
16.
ZhangD.-F, ShiG.-L, DaiQ.-W, YuanW, DuanH.-L: ‘Microstructures and mechanical properties of high strength Mg–Zn–Mn alloy’,Trans. Nonferrous Met. Soc., 2008, 18, (1), s59–s63.
17.
DaiQ.-W, ZhangD.-F, YuanW, ShiG.-L, DuanH.-L: ‘Researches on extrusion, microstructure and mechanical properties of new Mg–Zn–Mn alloy’,Cailiao Gongcheng, 2008, 4, 38–42.
18.
ParkSS, BaeGT, KangDH, JungI.-H, ShinKS, KimNJ: ‘Microstructure and tensile properties of twin-roll cast Mg–Zn–Mn–Al alloys’,Scr. Mater., 2007, 57, (9), 793–796.
19.
ParkSS, OhYS, KangDH, KimNJ: ‘Microstructural evolution in twin-roll strip cast Mg–Zn–Mn–Al alloy’,Mater. Sci. Eng. A, 2007, A448–A451, 352–355.
BohlenJ, DobronP, SwiostekJ, LetzigD, ChmelikF, LukacP, KainerKU: ‘On the influence of the grain size and solute content on the AE response of magnesium alloys tested in tension and compression’,Mater. Sci. Eng. A, 2007, A462, (1–2), 302–306.
22.
KoikeJ: ‘Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature’,Metall. Mater. Trans. A, 2005, 36A, (7), 1689–1696.
23.
YuK, LiW.-X, WangR.-C: ‘Effects of heat treatment on microstructures and mechanical properties of ZK60 magnesium alloy’,Zhongguo Youse Jinshu Xuebao, 2007, 17, (2), 188–192.
24.
XuD, PengL, LiuL, XuY: ‘Influence of heat treatments on the mechanical properties of forged ZK60-Y magnesium alloy’,Cailiao Yanjiu Xuebao, 2005, 19, (6), 573–580.
25.
PattersonAL: ‘The Scherrer formula for X-ray particle size determination’,Phys. Rev., 1939, 56, (10), 978–982.
26.
YamasakiM, KawamuraY: ‘Thermal diffusivity and thermal conductivity of Mg–Zn–rare earth element alloys with long-period stacking ordered phase’,Scr. Mater., 2009, 60, (4), 264–267.
27.
ClarkJB: ‘Transmission electron microscopy study of age hardening in a Mg–5 wt. Zn alloy’, Acta Metall., 1965, 13, (12), 1281-&.
28.
WeiLY, DunlopGL, WestengenH: ‘The Intergranular microstructure of cast Mg–Zn and Mg–Zn–rare earth alloys’,Metall. Mater. Trans. A, 1995, 26A, (8), 1947–1955.
29.
GaoX, NieJF: ‘Characterization of strengthening precipitate phases in a Mg–Zn alloy’,Scr. Mater., 2007, 56, (8), 645–648.
30.
SinghA, TsaiAP: ‘Structural characteristics of β′1 precipitates in Mg–Zn-based alloys’,Scr. Mater., 2007, 57, (10), 941–944.
precipitates, but not in the disc shaped 
precipitates.