For a practical point of view, the bearing steels are loaded up to the very high cycle fatigue regime, in service, far away from the Wöhler regime. In the present paper, several approaches are discussed in order to open some ways of investigation, in the range of 109 cycles: accelerated fatigue testing, thermal dissipation, fish-eye formation, inclusion effect, short crack propagation and stability of the microstructure.
SakaiT: ‘Review and prospects for current studies on very high cycle fatigue of metallic materials for machine structural use’, Proc. 4th Int. Conf. on ‘Very high cycle fatigue’, Ann Arbor, MI, USA, August 2007, TMS.
2.
BathiasC, ParisPC: ‘Gigacycle fatigue in mechanical practice’; 2004, New York, Marcel Dekker.
3.
BathiasC: ‘There is no infinite fatigue life in metallic materials’,Fatigue Fract. Eng. Mater. Struct., 1999, 22, 559–565.
4.
BathiasC: ‘Piezo-electric fatigue testing machines and devices’, Proc. 3rd Int. Conf. on ‘Very high cycle fatigue’, Toyko, Japan, September 2004, TMS, 472–483.
5.
WuTY, NiJG, BathiasC: ‘Automatic in ultrasonic fatigue machine to study low crack growth at room and high temperature’,ASTM STP, 1993, 1231, 598–607.
BathiasC, NiJG: ‘Determination of fatigue limit between 105 and 109 cycles using an ultrasonic fatigue device’,ASTM STP, 1993, 1211, 151–152.
8.
RancN, WagnerD, ParisPC: ‘Study of thermal effects associated with crack propagation during very high cycle fatigue’,Acta Meter., 2008, 56, 4012–4021.
9.
GrabulovA, ZieseU, ZandergenHW: ‘Investigation of microstructural changes within white etching area under rolling contact fatigue’, Proc. 4th Int. Conf. on ‘Very high cycle fatigue’, Ann Arbor, MI, USA, August 2007, TMS, 219–226.
