The work reported in the present paper outlines the use of a combined artificial neural network model capable of fast online prediction of textures in low and extralow carbon steels. We approach the problem by a Bayesian framework neural network model that takes into account as input to the model the influence of 23 parameters describing the chemical composition and the thermomechanical processes, such as austenite and ferrite rolling, coiling, cold working and subsequent annealing, involved in the production route of low and extralow carbon steels. The output of the model is in the form of fibre texture data. The predictions of the network provide an excellent match to the experimentally measured data. The results presented in the present paper demonstrate that this model can help in optimising the normal anisotropy rm of steel products.
KawallaR, JungnickelW, SchmitzHP, PaulG, de PaepeA, von HaaftenWM: ‘Effect of hot and cold rolling technology on textures and plastic anisotropy of flat products’, ECSC report, European Commission, Luxembourg, 2007.
3.
KestensL, GutierrezI, BocosJL, ZaiteguiJ, CascioliV, di NunzioPE, GrossterlindenR: ‘Texture control in cold-rolled steel sheets for an optimised arlisotropy’, ECSC report, European Commission, Luxembourg, 2002.
4.
IungT, LannooG, de AndresCG, SalvatoriI: ‘Metallurgical aspects of the compact reheating treatment of hot-rolled strips before coiling’, ECSC report, European Commission, Luxembourg, 2007.
5.
CapdevilaC, de CockT, Garcia-MateoC, CaballeroFG, de AndresCG: Mater. Sci. Forum, 2005, 500–501, 803–810.
6.
CapdevilaC, FerrerJP, CaballeroFG, de AndresCG: Metall. Mater. Trans. A, 2006, 37A, 2059–2068.
7.
CaballeroFG, CapdevilaC, de AndresCG: Mater. Sci. Technol., 2001, 17, 1114–1118.
DanielD, JonasJJ: Metall. Trans. A, 1990, 21A, 331–342.
19.
HeldJF: ‘Mechanical working and steel processing IV’; 1965, New York, The Metallurgical Society of AIME.
20.
RayRK, JonasJJ: Int. Mater. Rev., 1990, 35, 1–15.
21.
FukudaM: Tetsu-to-Hagane, 1967, 53, 559–561.
22.
MatsudoK, ShimomuraT: Trans. Iron Steel Inst. Jpn, 1970, 10, 448–458.
23.
HookRE, HecklerAJ, EliasJA: Metall. Trans. A, 1975, 6A, 1683–1672.
24.
HookRE, NyoH: Metall. Trans. A, 1975, 6A, 1443–1451.
25.
DeArdoAJ: ‘Physical metallurgy of interstitial-free steels: precipitates and solutes’, 125–136; 2000, Warrendale, PA, International Steel Society (ISS).
MatsuoM, HayakawaH, HayamiS: Proc. 5th Int. Conf. on ‘Textures of materials’, (ed. , GottsteinG, LückeK), 275–284; 1978, Berlin, Springer-Verlag.
32.
OkamotoA, TakahashiM: Proc. 6th Int. Conf. ‘Textures of materials’, (ed. , NagashimaS, ed), 739–748; 1981, Tokyo, Iron and Steel Institute of Japan.
33.
OnoS, NozoeO, ShimomuraT, MatsudoK: ‘Metallurgy of continuous-annealed sheet steel’, (ed. , BramfittB L, MangononP L), 99–115; 1982, Warrendale, PA, The Metallurgical Society of AIME.
34.
LavigneJJ, SuzukiT, AbeH: Proc. 6th Int. Conf. ‘Textures of materials’, (ed. , NagashimaS, ed), 749–758; 1981, Tokyo, Iron and Steel Institute of Japan.
35.
de CockT, CapdevilaC, CaballeroFG, de AndresCG: Mater. Sci. Eng. A, 2009, A519, 9–18.
36.
de CockT, CapdevilaC, CaballeroFG, de AndresCG: Mater. Trans., 2008, 49, 2292–2297.
