The development of low temperature applications for ferritic nodular cast irons calls for improved materials in the as cast state, e.g. for off-shore windmills components. Within this line of work, a series of 68 castings were prepared with the same casting procedure and slight changes in composition. The tensile properties at room temperature, as well as the impact energy for rupture at room temperature, −20°C and −40°C, were measured. Outputs from multivariate analysis performed on the data are then discussed and compared to literature results, putting emphasis on the properties of the ferritic matrix.
FrenzH: Doctor's dissertation, ‘Eigenschaftenvon ferritischem und ferritisch-perlitischem Gusseisen mit Kugelgraphit unterbesonderer Beachtung des Bruchverhaltens’, TechnicalUniversity of Berlin, Berlin, Germany, 1991.
‘Referencemicrostructure for measurement of pearlite and ferrite content in ductileiron microstructures’, AFS current informationreport, Quality Control Committee 12-E, Ductile Iron Division, 1984.
21.
HelminkRC, WallaceJI: Research project no. 8, Factors affecting optimumproperties in heavy section ductile iron, Ductile Iron Society, Mountainside,NJ, USA, 1977.
22.
DieterGE: ‘Mechanical metallurgy’, 3rdedn; 1986, New York, McGraw-Hill,Inc.
Effectsof Room Temperature Aging on Ductile Iron Richards, V L Van Mereau, D C AkenO P Nicola, W MTransactions of the American Foundry Society and the One HundredEighth Annual Metalcasting Congress; Rosemont, IL; USA; 12–15 June 2004.pp. 801–812. 2004.
25.
BjörkegrenLE, HambergK: Proc. 2003 Keith Millis Symp. on ‘Ductileiron’, Hilton Head Island, SC, USA, October 2003, Ductile Iron Society, 42–51.
26.
LeslieWC: ‘The physical metallurgy of steels’; 1981, Marietta,OH, Techbooks.
