Laminated composite materials consisting of an orthorhombic Ti2AlNb based alloy and an (α+β) titanium alloy have been fabricated at a laboratory scale using a two-step process involving diffusion bonding and hot rolling. The feasibility of fabrication of two and three layered materials with high quality bonding between layers was demonstrated. Preliminary assessment of the tensile mechanical properties of the obtained composite materials showed that they were superior to those of the titanium alloy and slightly inferior to the orthorhombic alloy.
RybinV. V., SemenovV. A., SemenovA. N., FilinJ. A., OkunevJ. K., GrinbergB. A., ElkinoO. A., KarkinaL. E., PatselorA. M.: Voprosy Materialovedenija, 2004, 38, 47–60.
2.
RybinV. V., SidorovI. I., GrinbergB. A., AntonovaO. V., VolkovaN. P., InozemtsevA. V., SalishchevG. A.: Voprosy Materialovedenija, 2004, 38, 61–71.
3.
RybinV. V., SemenovV. A., SemenovA. N., SidorovI. I., GreenburgB. A., AntonovaO. A., EllcinaO. A., KarlcinaL. E., PatselovA. M., YuA., InozemtserA. V.: Phys. Met. Metallogr., 2005, 99, 82–91.
4.
ImayevR. M., ImayevV. M., SalishchevG. A.: ‘Development of cost-effective processing of sheets and foils out of intermetallic alloys based on y-TiAl and 0-TiAl2Nb with improved superplastic proper-ties’, Final report on the ISTC project no. 2312, Ufa, Russia, 2008.
5.
GlatzW. and ClemensH.: Intermetallics, 1997, 6, 415–423.
6.
BanerjeeD., BaligidadR. G. and GogiaA. K.: Proc. 3rd Int. Symp. on ‘Structural intermetallics’, (ed.HemkerK. J. et al), 2001, Warrendale, PA, TMS, published on CD ROM.
7.
SuwasS., NandyT. K., Bhanu PrasadV. V., KamatS. V., BanerjeeD.: Proc. 3rd Int. Symp. on ‘Structural intermetallics’, (ed.HemkerK. J.et al); 2001, Warrendale, PA, TMS, published on CD ROM.
PengL. M., WangJ. H., LiH., ZhaoJ. H. and HeL. H.: Scr. Mater., 2005, 52, 243–248.
10.
MuljukovR. R.: Rossiiskie Nanotechnologii, 2007, 2, (7-8), 38–53.
11.
GaleevR. M.: Metalls, 2005,6, 19–24.
12.
KaibyshevO. A., SafiullinR. V., JaR.. Lutfullin and V. V. Astanin: Mater. Eng. Perform., 1999, 8, 205–210.
13.
Ja. LutfullinR., KaibyshevO. A., ValiakhmetovO. R., MuhametrahimovM. K., SafiullinR. V., MuljukovR. R.: Perspektivnie Materialy, 2003, 4, 21–25.
14.
KaibyshevO. A., SafiullinR. V., Ja. LutfullinR.ValiakhmetovO. R., GaleyevR. M., DuttaA., RaghuT. and SahaG. G.: Mater. Sci. Technot, 2006, 22, 343–348.
15.
BerdinV. K. and KhF.. Khismatullin: Svarochnoe Proizvodstvo, 1991, 11, 41–43.
16.
GogiaA. K., NandyT. K., BanerjeeD., CariseyT., StrudelJ.-L. and FranchetJ. M.: Intermetallics, 1998, 6, 741–748.
