The Alloys by Design project aims to develop and refine an integrated array of models to assist in the rapid development of nickel based superalloys. A viable alloy must be stable, creep resistant, castable and coatable. By incorporating the complex interactions between composition, microstructure and processing of the alloys into models, a wider range of compositions can be explored enabling more innovative design strategies. Each of these issues is addressed at a range of appropriate levels from the atomic scale to the continuum.
CoulsenC. A.: Proc. R Soc. Lond A, 1939, 169A, 413–428.
7.
PettiforD. G.: Acta Mater., 2003; 51, 5649–5673.
8.
FinnisM.: Prog. Mater. Sci, 2007, 52, 133–153.
9.
AokiM., Nguyen-ManhD., PettiforD. G. and VitekV.: Prog. Mater. Sci, 2007, 52, 154–195.
10.
HobbsR. A., ZhangL., RaeC. M. F. and TinS.: MetalL Trans. A, 2008, 39A, 1014–1025.
11.
YangX. L., DongH. B., WangW. and LeeP. D.: Mater. Set Eng. A, 2004, A386, 129–139.
12.
WangW., LeeP. D. and McLeanM.: Acta Mater., 2003, 50, 2971–2987.
13.
KarunaratneM. S. A., RaeC. M. F. and ReedR. C.: MetalL Mater. Trans. A, 2001, 32A, 2409–2421.
14.
WarnkenN. and ReedR. C.: personal communication.
15.
CaronP., OhtaY., NakagawaY. G. and KahnT.: in ‘Superalloys 1988’ (Proc. 4th Int. Symp. for Superalloys), (ed.ReichmanS. et al), 215-224; 1988, Warrendale, PA, The Metallurgical Society of AIME.
16.
WangY., BannerjeeD., SuC. C. and KhachaturyanA. G.: Acta Mater., 1998, 46, 2983–3001.
17.
WalstonS., CetelA., MackayR., O'HaraK., DuhlD. and DreshfieldR.: in ‘Superalloys 2004’ (Proc. 10th Int. Symp. for Superalloys), (ed. GreenK. A.et al), 9-18; 2004, Warrendale, PA, TMS.
18.
RaeC. M. F., HookM. S. and ReedR. C.: Mater. Sci Eng. A, 2005, A396, 231–239.
KarunaratneM. S. A, CoxD. C., CarterP. and ReedR. C.: in ‘Superalloys 2000’ (Proc. 9th Int. Symp. for Superalloys), (ed. T. C. Pollock et al. (, 263-272; 2000, Warrendale, PA, TMS.
21.
CambellC. E., BoettingerW. J. and KattnerU. R.: Acta Mater., 2002, 50, 775–792.
22.
RaeC. M. F. and ReedR. C.: Acta Mater., 2007, 55, 1067–1081.
23.
RaeC. M. F. and ReedR. C.: Mater. Sci Eng. A, 2000, A300, 125–134.
24.
YamaguchiM. and UmakoshiY.: Prog. Mater. Sci, 1991, 34, 1–148.
25.
YehA. C., RaeC. M. F. and TinS.: in ‘Superalloys 2004’ (Proc. 10th Int. Symp. for Superalloys), (ed.GreenK. A. et al), 677-686; 2004, Warrendale, PA, TMS.
26.
DrewG. L., ReedR. C., KakehiK. and RaeC. M. F.: in ‘Superalloys 2004’ (Proc. 10th Int. Symp. for Superalloys), (ed.GreenK. A. et al), 127-136; 2004, Warrendale, PA, TMS.
27.
VoterA. F. and ChenS. P.: Scr. Mater., 1988, 82, 175.
28.
ShenC. and WangY.: Acta Mater., 2004, 52, 683–691.
29.
ShenC. and WangY.: Acta Mater., 2003, 51, 2595–2610.
30.
VoronsovV. and DyeD.: Scr. Mater., 2008, to be published.
31.
RaeC. M. F., KakehiK. and ReedR. C.: Proc. 7th Liege Conf. on ‘Materials for advanced power engineering’, Liege, Belgium, September 2002, EUCOST Initiative,207–216.
32.
HillierG. S., RaeC. M. F. and BhadeshiaH. K. D. H.: Acta Metall, 1988, 36, 95–109.
33.
BasoaltoH., SondhiS. K., DysonB. F. and McLeanM.: in ‘Superalloys 2004’ (Proc. 10th Int. Symp. for Superalloys), (ed.GreenK. A. et al), 897-906; 2004, Warrendale, PA, TMS.
34.
MaA., DyeD. and ReedR. C.: Acta Mater., 2008, 56, 1657–1670.
35.
ManonukulA., DunneF. P. E. and KnowlesD.: Acta Mater., 2002, 50, 2917–2931.
36.
DunneF. P. E., RuggD. and WalkerA.: Int. J. Plast., 2007, 23, 1061–1083.
