The present experimental and theoretical study investigates the effect of nickel on the phase balance and resulting properties of a 22Cr duplex stainless steel. The decrease in nickel was balanced by nitrogen and manganese additions. It was found that a minimum nickel content was required to maintain mechanical and corrosion properties at technically relevant levels. The influence of increasing nitrogen content on resulting phase composition and properties is discussed.
JargeliusR. F. A., BlomR., HertzmanS. and LinderJ.: Proc. Conf. on ‘Duplex stainless steels 91’, (ed.CharlesJ. and BernhardssonS.), Vol. 1, 211-220; 1991, Beaune, Les editions de physique.
2.
BernhardssonS.: Proc. Conf. on ‘Duplex stainless steels 91’, (ed.CharlesJ. and BernhardssonS.), Vol. 1, 185-210; 1991, Beaune, Les editions de physique.
3.
NordbergH.: Proc. Conf. on ‘Stainless steel 93’, Florence, Italy, October 1993, Associazione Italiana di Metallurgia,Vol. 2, 2.217-2.229.
4.
HertzmanS., BrolundB. and FerreiraP. J.: Met. Mater. Trans. A, 1997, 28A, 277–285.
5.
OlssonJ. and LiljasM.: Proc. Int. Conf. on ‘Corrosion’, Baltimore, MD, USA, February—March 1994, NACE International, Paper 395.
6.
NanaS. and CortieM. B.: J. SAIMM, 1993, 93, 307–315.
7.
JarlM.: Scand J. Met., 1978, 7, 93–101.
8.
SuutalaN.: Met. Trans. A, 1982, 13A, 2121–2130.
9.
GavriljukV. G. and BernsH.: ‘High nitrogen steels, structure, properties, manufacture, applications’; 1999, Berlin, Springer.
10.
SundmanB., JanssonB. B. and AnderssonJ.-O.: Calphad, 1985, 9, 153–190.
HutchinsonW. B., SchlippenbachU. V. and JonssonJ.: Proc. Conf. on ‘Duplex stainless steels 86’, The Hague, The Netherlands, October 1986, Nederlands Instituut voor Lastechniek,326–330.
13.
NilssonA. S.: Anisotropi i Duplext Rostfritt SW SS 2377’, Report IM-2551, Swedish Institute for Metals Research, Stockholm, Sweden, 1990.
14.
LorentzK. and MedawarG.: Thyssenforschung, 1969, 1, 97–108.
15.
PetterssonR. F. A. and FlygJ.: Proc. 13th Scandin. Corros. Cong., Reykjavik, Iceland, April 2004, Icelandic Building Research Institute, Paper 30.
16.
KempM., van BennekomA. and RobinsonF. P. A.: Mater. Sci Eng. A, 1995, A199, 183–194.
17.
SpeidelM. O. and PedrazzoliR. M.: Mater. Perform., 1992,31, 59–61.
18.
RondelliG., VicentiniB. and CigadaA.: Werkstoffe Korros ion, 1995, 46, 628–632.
19.
Jargelius-PetterssonR. F. A.: Corrosion, 1998, 54, 162–168.
20.
PetterssonR., FlygJ. and WelanderC.: ‘Factors affecting pitting and crevice corrosion in stainless steels’, Report IM-2003-501, Swedish Institute for Metals Research, Stockholm, Sweden, 2003.
21.
VannevikH., NilssonJ.-O., FrodighJ. and KangasP.: ISIJ Int., 1996, 36, 807–812.
22.
SieurinH., ZanderJ. and SandstromR.: Mater. Sci Eng. A, 2006, A415, 66–71.
23.
Outokumpu Stainless Steel AB.
24.
FoctJ. and AkdutN.: Scr. Met. Mater., 1993, 29, 153–158.
