During continuous heating of a cold rolled low carbon steel, a dilatometric anomaly has been detected before the well known ferrite to austenite transformation. The detailed study of the processes occurring during the heating and comparison with the case of an ultralow carbon steel showed that this anomaly is related to the change in dislocation density during recrystallisation.
BungeH. J.: in ‘Directional properties of materials’, (ed.BungeH. J.), 1-63; 1988, Oberursel, DGM Informationsgesellchaft mbH.
2.
HutchinsonW.: Int. Mater. Rev., 1984, 29, 25–42.
3.
BetheK., HölscherM. and LückeK.: Proc. 10th Int. Conf. on ‘Texture of materials’, ICOTOM'10, Clausthal, Germany, 1993, Mater. Sei. Forum, 157-162,302–310.
4.
RaabeD. and LiickeK.: Mater. Sci. Technol, 1993, 9, 302–312.
5.
KlinkenbergC., RaabeD. and LiickeK.: Steel Res., 1994,65, 291–297.
6.
MacDonaldR. A.: in ‘Thermal expansion 8’, (ed.HahnT. A.), 11-19; 1984, New York, Plenum Press.
7.
RaoK. V. K.: Proc. Conf. on ‘Thermal expansion’, (ed.TaylorR. E. and DenmanG. L.), 219-230; 1974, New York, AIP.
8.
MegawH. D.: Mater. Res. Bull, 1971, 6, 1007–1018.
9.
BenvenisteY.: Int. J. Solids Struct., 1997, 34, 789–798.
10.
KopT. A., J. Sietsma and S. van der Zwaag: Mater. Sci. Technol, 2001, 17, 1569–1574.
11.
HollembergG. W. and RuhR.: Conf. Proc. on ‘Thermal expansion’, (ed.TaylorR. E. and DenmanG. L.), 342-345; 1958, New York, AIP.
12.
Perez-PradoM. T., IbanezJ., MorrisM., CristinaM. C., RuanoO. A. and Gonzalez-DoncelG.: Rev. Metal. Madrid, 1998, 34, 324.
13.
BungeH. J.: ‘Texture analysis in materials science’; 1982, London, Butterworths.
14.
Garciade AndrésC., CaruanaG. and AlvarezL. F.: Mater. Sci. Eng. A, 1998, A241, 211.
15.
LeperaF. S.: J. Met., 1980, 32, 38–39.
16.
InagakiH.: ISIJ Int., 1994, 34, 313–321.
17.
BarnetM. R., JonasJ. J. and HodgsonP. D.: Proc. 31st MWSP Conf., Hamilton, ON, Canada, 1996, Iron and Steel Society, 971.
18.
UshiodaK. and HutchinsonW. B.: ISIJ Int., 1989, 29, 862.
19.
PepperhoffW. and AcetM.: ‘Constitution and magnetism of iron and its alloys’, 1st edn, 70-73; 2001, Berlin, Heidelberg, Springer-Verlag.
20.
BodinA.: Intercritical deformation of low-alloy steels’, PhD thesis, TU Delft, Netherlands, 2002.
