An experimental programme to determine the fatigue behaviour of hot rolled reinforced bars of two austenitic (AISI 304LN and AISI 316LN grades) and one duplex (AISI 2205 grade) stainless steels was conducted. The statistical model applied to define the S–N curves (Castillo et al.) of these products is also described. Finally, fractographic and microstructural analysis of the specimens allowed us to ascertain the parameters that have the greatest influence on the fatigue life of these structural components.
HelgansonT., HansonJ. M., SomesN. F., CorleyW. G. and HognestadE.: ‘Fatigue strength of high-yield reinforcing bars’, National Cooperative Highway Research Programme Report 164, Transportation Research Board, Washington, DC, USA, 1976.
3.
CanteliA., EsslingerV. and ThfirlimannB.: ‘Ermfidungsfestigkeit von Beweherungs— und Spannstählen'; 1984, Basel, Birkhäuser Verlag.
4.
‘Steel for the reinforcement and prestressing of concrete—test methods, Part1: reinforcing bars and wires’, ISO/CD 15630-1, 1998, 2.
5.
‘Betonbewehrungsstahl—Schweissgeeigneter Betonstahl’, prEN10080, Comité Européen de Normalisation, Bruselas, 1999.
6.
Turas corrugadas de acero soldable con caracteristicas especiales de ductilidad para armaduras de hormigón armado’, UNE36065:2000 EX, AENOR, Spain, 1999.
7.
Alambres corrugados de acero inoxidable austenitico para armaduras de hormig6n armado’, UNE 36-067-94, AENOR, Spain, 1994.
8.
‘British standard specification for austenitic stainless steel bars for the reinforcement of concrete’, BS6744, 1986
9.
McGurnJ. M.: ‘Standard steel for reinforcing bar in concrete’ Proc. Int. Conf. on ‘Corrosion and rehabilitation of reinforced concrete structures’, Orlando, FL, USA, December 1998, FHWA, on CD-rom.
10.
CastilloE., CanteliA., EsslingerV. and ThfirlimannB.: IABSE Proc., 1985, 82/85, 1–40.
11.
CastilloE. and CanteliA.: Int. J. Fract., 2001, 107, 117–137.
12.
AenlleM. L.: ‘Fatigue characterization of composites subject to random and block loading’, PhD thesis, University of Oviedo, Gij6n, Spain, 2001.
13.
GrinderD. and ChoneJ.: ‘Formation of titanium nitride particles in continuously cast stainless steel products’, (ed. McPhersonN. A. and McLeanA.); 1995, Warrendale, PA, ISS.
14.
McPhersonN. A. and A. McLean (eds.): Non-metallic inclusions in continuously cast steel'; 1995, Warrendale, PA, ISS.
15.
MitchellM. R.: in ‘ASM handbook’, ‘Fundamentals of modern fatigue analysis for design’, 19; 1996, Materials Park, OH, ASM International.
