Abstract
Post-weld heat treatment (PWHT) of 2219-O aluminium alloy friction stir welding joints was carried out at solution temperatures of 480, 500 and 540°C for 32 min followed by aging at 130°C for 9 h. The effects of PWHT on the microstructure and mechanical properties of the joints were investigated. Experimental results show that PWHT causes coarsening of the grains in the weld, and the coarsening degree increases with increasing solution temperature. The tensile strength of the heat treated joints increases with increasing solution temperature. The maximum tensile strength can reach 260% that of the base material at the solution temperature of 540°C. PWHT has a significant effect on the fracture locations of the joints. When the solution temperature is lower than 500°C, the joints fracture in the base material; when the temperature is higher than 500°C, the joints fracture in the weld. The change of the fracture locations of joints is attributed to the presence of precipitate free zones beside the grain boundaries and coarsening equiaxed grain structures in the weld.
Keywords
Get full access to this article
View all access options for this article.