Sage Journals: Discover world-class research

Abstract

The use of molybdenum trioxide (MoO₃), which is cheap and relatively abundant MoO₃ has been evaluated as a potential alternative to expensive FeMo as a steel alloying method. Pure MoO₃ volatilises very significantly above its melting point (1068 K) and results in a poor alloy yield when added to steel. The volatilisation of MoO₃ in FeSi–MoO₃, MoO₃–CaO and MoO₃–MgO mixtures have been investigated by TG-DTA. Self-reducing experiments of industrial MoO₃ mixed with FeSi, CaO and CaF₂ have been performed in an electric resistance furnace. The results show that the volatilisation of industrial MoO₃ can be effectively inhibited when adding CaO and FeSi and addition of CaF₂ helps form a low melting point slag and results in good separation of metal and slag, The Mo quickly dissolves in the molten steel with 95% recovery.

Get full access to this article

View all access options for this article.

References

Saburi

Murata

Suzuki

Fujii

and Kiuchi

: J. Plasma Fusion Res., 2002, 78, 3.

Chychko

Teng

and Seetharaman

: Steel Res. Int., 2010, 81, 784.

Chychko

Teng

and Seetharaman

: Steel Res. Int., 2011, 82, 269.

Chychko

Teng

and Seetharaman

: Steel Res. Int., 2011, 82, 886.

Chakraborty

Banerjee

and Sharma

: J. Alloy Compd, 2009, 477, 256.

Turkdogan

: ‘Physical chemical of high temperature technology’; 1980, New York, Academic Press.

Levin

and McMurdie

: ‘Phase diagrams for ceramists, supplement’; 1975, Columbus, The American Ceramic Society.

Liang

and Che

: ‘Thermodynamics data book of inorganic compound’; 1993, Shenyang, Northeastern University Press.

Paul

Chakraborty

Kishor

Sharma

and Suri

: Mater. Trans. B, 2011, 42, 700.

10.

Anon : in ‘Slag atlas’, 2nd edn, 194; 1995, Dusseldorf, Verlag Stahleisen GmbH.

Silicothermic self-reducing MoO 3 briquettes for direct alloying of Mo in molten steel

Abstract

Get full access to this article

References