Abstract
During the current research and development activities at Tata Steel Teesside Technology Centre, UK, the inclined plane test (IPT) is adopted as a quick method to measure the viscosity/fluidity of mould powders being used currently for continuous casting of different steel qualities and section sizes. The usefulness of the IPT method was also validated by comparing the viscosities that were measured by a high temperature viscometer. It has been established that the IPT measured viscosity values are comparable with the mould powder supplier’s data. The IPT ribbon lengths of different powders have been correlated with the viscosities using an Arrhenius type relationship. The ribbon lengths of the solidified fluxes were found to have a good correlation with the molar ratios of the corresponding powders. Hence, the relationship was further tuned to develop a viscosity prediction model using the chemical compositions of the mould fluxes (i.e. the model can be used for a quick assessment of mould flux viscosity based on its chemical composition).
Get full access to this article
View all access options for this article.