Determination of CC slab solidification using nail shooting technique

Abstract

The technology of nail shooting was improved and used to study the transverse shape of the solidified shell during steel continuous casting. Three locations across the slab width (1/2, 1/4 and 1/8) were measured by nail shooting and which indicated a larger solidification coefficient and longer liquid core in the slab at higher casting speeds. The solidified shell across the slab width direction was non-uniform due to uneven secondary spray cooling. The point of final solidification at locations 1/8 and 1/4 was much longer than the position between the slab centre and location 1/4, leading to a long solidification end of >2 m, which is poor for the application of dynamic soft reduction. A mathematical model was developed to simulate the growth of the solidified shell and which was in good agreement with the measurements measured by nail shooting. Based on the measurements and simulations, the water spray pattern was improved, making the solidified shell more uniform. Dynamic soft reduction was then optimised resulting in reduced centreline segregation.