Effect of particle composition on consolidation of hot briquetted iron

Abstract

The influence of the carbon concentration of directly reduced iron (DRI) powders on the compressibility and fracture strength of hot briquetted iron (HBI) has been studied. Industrially produced DRI, pure iron powder and Fe–C alloy powders (synthetic DRI) were used in the study. It was found that the mechanism of compaction could be attributed to pure yielding. The pressure required to attain a given density increased proportionally with the carbon content. The morphology and phases present in DRI powder had a significant influence on the compressibility. The fracture strength of the compacts increased with increasing carbon content of the DRI powder. These observations are discussed with reference to the current understanding of the mechanisms of compaction and fracture of compacted particulate materials.

Get full access to this article

View all access options for this article.

References

Hassan

Whipp

: Iron Steelmaker, 1995, 4, 35–40.

Brent

A. D.

Mayfield

P. L. J.

Honeyands

T. A.

: Proc. Conf. on ‘Alternative routes of iron and steelmaking’: ICARISM’99, Perth, Australia, September 1999, AusIMM and CSIRO Minerals, 111–114.

Hunter

: Steel Times, 1995, 3, 105.

Crawford

: ‘Microstructural analysis of HBI’, Private communication, BHP–Billiton Technology Centre, Newcastle, Australia, 2001.

Arzt

Ashby

M. F.

Easterling

K. E.

: Metall. Trans. A, 1983, 14A, 211–221.

Helle

A. S.

Easterling

K. E.

Ashby

M. F.

: Acta Metall., 1985, 12, 2163–2174.

Turner

C. D.

Ashby

M. F.

: Acta Mater., 1996, 11, 4521–4530.

Hewitt

R. L.

Wallace

Malherbe

M. C.

: Powder Metall., 1974, 17, 1–12.

Honeyands

T. A.

: ‘Effect of carbon and MgO on briquette strength’, Confidential report, BHP–Billiton Technology Centre, Newcastle, Australia, 2000.

10.

Honeyands

T. A.

: ‘Port Hedland–Orinoco iron briquettability comparison’, Technote BHP, Newcastle, NSW, Australia, 2001.

11.

Cárdenas

: ‘Effect of the carbon content on the FIOR–HBI density and the implications in handling and transportation’, MEng thesis. UNEXPO, Puerto Ordaz, Venezuela, 2001.

12.

Dippenaar

R. J.

Melfo

Blundell

Honeyands

: Proc. Australia–Japan ‘Iron and steelmaking’ Symp., Sydney, Australia, July 2004, University of New South Wales.

13.

Melfo

: ‘Early sintering phenomena pertaining to hot briquetted iron’, MEng thesis, Wollongong University, Wollongong, Australia, 2002.

14.

‘Standard test method for compressibility of metal powders in uniaxial compaction’, ASTM standard B 331–95, Philadelphia, PA, USA, 1997.

15.

Fahad

M. K.

: J. Mater. Sci., 1996, 31, 3723–3729.

16.

Rudnick

Hunter

A. R.

Holden

F. C.

: Mater. Res. Stand., 1963, 4, 283–289.

17.

Frost

H. J.

Ashby

M. F.

: ‘Deformation mechanism maps: plasticity and creep of metals and ceramics’, 60; 1982, Oxford, UK, Pergamon Press.