Abstract
The present study was motivated by problems at continuous casting plants where a variety of thermally induced defects were observed. The paper outlines an experimental method for the measurement of cooling intensity in the secondary cooling area where nozzles are applied. The precision of a variety of experimental methods is discussed. The nozzles have been investigated in terms of pressure setting, the influence of casting speed, and behaviour in the overlapping areas. The tests have provided information on heat transfer coefficient characteristics and heat flux distribution on the cooled steel surface. The paper presents new experimental findings regarding specification of the Leidenfrost temperature, which is the point between high and low surface temperature regions where a large difference in cooling intensity is observed. The paper also deals with the problems of homogeneity of cooling along the nozzle spray angle and in the overlapping area where thermal 'stripes' occur. The sensitivity of this problem to the pressure of the coolant is discussed.
Get full access to this article
View all access options for this article.