Nuclear fuel cladding for pressurised water reactors is commonly manufactured with zirconium alloys. The M5 alloy is a relatively new cladding material for in-reactor used with enhanced performance compared to traditional zircaloys. In this work, the influence of temperature on the corrosion resistance and semiconducting properties of the passive film formed on the M5 alloy in a borate buffer solution has been evaluated. The electrochemical behaviour of the zirconium alloy was assessed by potentiodynamic polarisation tests, electrochemical impedance spectroscopy and Mott–Schottky plots. The results indicated that the corrosion resistance of the M5 alloy decreased with temperature due to the formation of a less stable and more defective passive film. The Mott–Schottky approach used in combination with polarisation tests and impedance measurements was effective to reveal the protective state of the passive film on the M5 alloy.
AzevedoC. R. F.: ‘Selection of fuel cladding material for nuclear fission reactors’Eng. Fail. Anal., 2011181943–1962. doi: 10.1016/j.engfailanal.2011.06.010
2.
TangR. and YangX.: ‘Dissolution and precipitation behaviours of hydrides in N18, Zry-4 and M5 alloys’Int. J. Hydrogen Energy2009347269–7274. doi: 10.1016/j.ijhydene.2009.07.018
3.
BojinovM.KarastoyanovV.KinnunenP. and SaarioT.: ‘Influence of water chemistry on the corrosion mechanism of a zirconium-niobium alloy in simulated light water reactor coolant conditions’Corros. Sci., 20105254–67. doi: 10.1016/j.corsci.2009.08.045
4.
PengD. Q.BaiX. D. and ChenB. S.: ‘Corrosion behavior of carbon-implanted M5 alloy in 1 M H2SO4’Appl. Surf. Sci., 2005245215–222. doi: 10.1016/j.apsusc.2004.10.012
5.
MardonJ. P.GarnerG. L. and HoffmannP. B.: ‘M5® a breakthrough in Zr alloy’. Proc. LWR Fuel Performance Meeting, Top Fuel, Orlando, FL, USA, September 2010.
6.
ChenY.Urquidi-MacdonaldM. and MacdonaldD. D.: ‘The electrochemistry of zirconium in aqueous solutions at elevated temperatures and pressures’J. Nucl. Mater., 2006348133–147. doi: 10.1016/j.jnucmat.2005.09.014
7.
CoxB.: ‘J. Some thoughts on the mechanisms of in-reactor corrosion of zirconium alloys’J. Nucl. Mater., 2005336331–368. doi: 10.1016/j.jnucmat.2004.09.029
8.
MüllerS. and LanzaniL.: ‘Corrosion of zirconium alloys in concentrated lithium hydroxide solutions’J. Nucl. Mater., 2013439251–257. doi: 10.1016/j.jnucmat.2012.07.030
9.
KimH. G.ParkS. Y.LeeM. H.JeongY. H. and KimS. D.: ‘Corrosion and microstructural characteristics of Zr-Nb alloys with different Nb contents’J. Nucl. Mater., 2008373429–432. doi: 10.1016/j.jnucmat.2007.05.035
10.
BenSalahM.SabotR.TrikiE.DhouibiL.RefaitPh. and JeanninM.: ‘Passivity of Sanicro28 (UNS N-08028) stainless steel in polluted phosphoric acid at different temperatures studied by electrochemical impedance spectroscopy and Mott-Schottky analysis’Corros. Sci., 20148661–70. doi: 10.1016/j.corsci.2014.04.056
11.
TaveiraL. V.MontemorM. F.Da Cunha BeloM.FerreiraM. G. and DickL. F. P.: ‘Influence of incorporated Mo and Nb on the Mott-Schottky behaviour of anodic films formed on AISI 304L’Corros. Sci., 2010522813–2818. doi: 10.1016/j.corsci.2010.04.021
12.
WoldemedhinM. T.RaabeD. and HasselA. W.: ‘Characterization of thin anodic oxides of Ti-Nb alloys by electrochemical impedance spectroscopy’Electrochim. Acta201282324–332. doi: 10.1016/j.electacta.2012.06.029
13.
LevineK. L.TallmanD. E. and BierwagenG. P.: ‘Mott–Schottky analysis of aluminium oxide formed in the presence of different mediators on the surface of aluminium alloy 2024-T3’J. Mater. Proc. Technol., 2008199321–326. doi: 10.1016/j.jmatprotec.2007.08.023
14.
de OliveiraM. C. L.PereiraV. S. M.CorreaO. V.de LimaN. B. and AntunesR. A.: ‘Correlation between the corrosion resistance and the semiconducting properties of the oxide film on AZ91D alloy after solution treatment’Corros. Sci., 201369311–321. doi: 10.1016/j.corsci.2012.12.015
15.
Fattah-alhosseiniA.GolozarM. A.SaatchiA. and RaeissiK.: ‘Effect of solution concentration on semiconducting properties of passive films formed on austenitic stainless steels’Corros. Sci., 201052205–209. doi: 10.1016/j.corsci.2009.09.003
16.
Fernández-DomeneR. M.Blasco-TamaritE.García-GarcíaD. M. and García-AntónJ.: ‘Passive and transpassive behaviour of Alloy 31 in a heavy brine LiBr solution’Electrochim. Acta2013951–11. doi: 10.1016/j.electacta.2013.02.024
17.
ZhangX. and ShoesmithD. W.: ‘Influence of temperature on passive film properties on Ni-Cr-Mo alloy C-2000’Corros. Sci., 201376424–431. doi: 10.1016/j.corsci.2013.07.016
18.
YangY.GuoL. and LiuH.: ‘The effect of temperature on corrosion behavior of SS316L in the cathode environment of proton exchange membrane fuel cells’J. Power Sources20111965503–5510. doi: 10.1016/j.jpowsour.2011.02.070
19.
ModianoS.FugivaraC. S. and BenedettiA. V.: ‘Effect of citrate ions on the electrochemical behavior of low-carbon steel in borate buffer solutions’Corros. Sci., 200446529–545. doi: 10.1016/S0010-938X(03)00170-7
20.
Blasco-TamaritE.Igual-MunhozA.García-AntónJ. and García-GarcíaD.: ‘Effect of temperature on the corrosion resistance and pitting behaviour of Alloy 31 in LiBr solutions’Corros. Sci., 2008501848–1857. doi: 10.1016/j.corsci.2008.03.016
21.
Escrivà-CerdánC.Blasco-TamaritE.García-GarcíaD. M.García-AntónJ.AkidR. and WaltonJ.: ‘Effect of temperature on passive film formation of UNS N08031 Cr-Ni alloy in phosphoric acid contaminated with different aggressive anions’Electrochim. Acta2013111552–561. doi: 10.1016/j.electacta.2013.08.040
22.
Blasco-TamaritE.García-GarcíaD. M. and García-AntónJ.: ‘Imposed potential measurements to evaluate the pitting corrosion resistance and the galvanic behaviour of a highly alloyed austenitic stainless steel and its weldment in LiBr solution at temperatures up to 150°C’Corros. Sci., 201153784–795. doi: 10.1016/j.corsci.2010.11.013
23.
Abd Ed MeguidE. A. and Abd El LatifA. A.: ‘Critical pitting temperature for type 254 SMO stainless steel in chloride solutions’Corros. Sci., 200749263–275. doi: 10.1016/j.corsci.2006.06.011
24.
ZucchiF.GrassiV.FrignaniA.MonticelliC. and TrabanelliG.: ‘Electrochemical behaviour of a magnesium alloy containing rare earth elements’J. Appl. Electrochem., 200636195–204. doi: 10.1007/s10800-005-9053-3
25.
SouzaE. C.RossittiS. M. and RolloJ. M. D. A.: ‘Influence of chloride ion concentration and temperature on the electrochemical properties of passive films formed on a superduplex stainless steel’Mater. Charact., 201061240–244. doi: 10.1016/j.matchar.2009.12.004
26.
Valero VidalC. and Igual-MunhozA.: ‘Study of the adsorption process of bovine serum albumin on passivated surfaces of CoCrMo biomedical alloy’Electrochim. Acta2010558445–8452. doi: 10.1016/j.electacta.2010.07.028
27.
PanJ.ThierryD. and LeygrafC.: ‘Electrochemical impedance spectroscopy study of the passive film on titanium for implant application’Electrochim. Acta1996411143–1153. doi: 10.1016/0013-4686(95)00465-3
28.
Fuchs-GodecR. and PavlovicM. G.: ‘Synergistic effect between non-ionic surfactant and halide ions in the forms of inorganic or organic salts for the corrosion inhibition of stainless-steel X4Cr13 in sulphuric acid’Corros. Sci., 201258192–201. doi: 10.1016/j.corsci.2012.01.027
29.
KocijanA.MerlD. K. and JenkoM.: ‘The corrosion behaviour of austenitic and duplex stainless steels in artificial saliva with the addition of fluoride’Corros. Sci., 201153776–783. doi: 10.1016/j.corsci.2010.11.010
30.
MacdonaldD. D.IsmailK. M. and SikoraE.: ‘Characterization of the passive state on zinc’J. Electrochem. Soc., 19981453141–3149. doi: 10.1149/1.1838777
31.
AiJ.ChenY.Urquidi-MacdonaldM. and MacdonaldD. D.: ‘Electrochemical impedance spectroscopic study of passive zirconium’J. Nucl. Mater., 2008379162–168. doi: 10.1016/j.jnucmat.2008.06.011
32.
HakikiN. B.BoudinS.RondotB. and Da Cunha BeloM.: ‘The electronic structure of passive films formed on stainless steels’Corros. Sci., 1995371809–1822. doi: 10.1016/0010-938X(95)00084-W
33.
WangD. P.WangS. L. and WangJ. Q.: ‘Relationship between amorphous structure and corrosion behaviour in a Zr-Ni metallic glass’Corros. Sci., 20125988–95. doi: 10.1016/j.corsci.2012.02.017
34.
PaolaA. D.: ‘Semiconducting properties of passive films on stainless steels’Electrochim. Acta198934203–210. doi: 10.1016/0013-4686(89)87086-0
35.
GuJ-J.LingY-H.ZhangR.-Q.DaiX. and BaiX-D.: ‘Properties of passive nano films on zircaloy-4 affected by defects induced by hydrogen permeation’Chin. Phys. B201423088106–1-088106-6. doi: 10.1088/1674-1056/23/8/088106
36.
GoodletG.FatyS.CardosoS.FreitasP. P.SimõesA. M. P.FerreiraM. G. S. and Da Cunha BeloM.: ‘The electronic properties of sputtered chromium and iron oxide films’Corros. Sci., 2004461479–1499. doi: 10.1016/j.corsci.2003.09.022
37.
CarmezimM. J.SimõesA. M.FigueiredoM. O. and Da Cunha BeloM.: ‘Electrochemical behaviour of thermally treated Cr-oxide films deposited on stainless steel’Corros. Sci., 200244451–465. doi: 10.1016/S0010-938X(01)00076-2
38.
MacdonaldD. D.: ‘Passivity: enabler of our metals based civilization’Corros. Eng. Sci. Technol., 201449143–155. doi: 10.1179/1743278214Y.0000000158
39.
AntunesR. A.de OliveiraM. C. L. and CostaI.: ‘Study of the correlation between corrosion resistance and semi-conducting properties of the passive film of AISI 316L in physiological solution’Mater. Corros., 201263586–592.
40.
LiD. G.WangJ. D. and ChenD. R.: ‘Influence of potentiostatic aging temperature and pH on the diffusivity of a point defect in the passive film on Nb in an HCl solution’Electrochim. Acta201260134–146. doi: 10.1016/j.electacta.2011.11.024
