Influence of alternating voltages on passivation and corrosion properties of X80 pipeline steel in high pH 0.5 mol L − 1 NaHCO 3 +0.25 mol L − 1 Na 2 CO 3 solution
Restricted accessResearch articleFirst published online May, 2015
Influence of alternating voltages on passivation and corrosion properties of X80 pipeline steel in high pH 0.5 mol L − 1 NaHCO 3 +0.25 mol L − 1 Na 2 CO 3 solution
X80 steel exhibits two different steady states in 0.5 mol L− 1 NaHCO3+0.25 mol L− 1 Na2CO3 solution with and without precathodic polarisation, which are activation and passivation respectively. Different amplitudes of alternating voltages were superimposed to the pre- and non-prepolarised steels. The results demonstrated that passivation of the non-prepolarised steel was enhanced by low amplitude alternating voltages but was destroyed by high amplitude alternating voltages. Moreover, the corrosion of the prepolarised steel was worsened with the application of alternating voltages.
RagaultI. and de FranceG.: ‘AC corrosion induced by VHV electrical lines on polyethylene coated steel gas pipelines’. Proc. Conf. Corrosion 98, San Diego, CA, USA, March 1998, NACE International, Paper 98557.
2.
BücherM.: ‘Alternating current corrosion of cathodically protected pipelines: discussion of the involved processes and their consequences on the critical interference values’. Mater. Corros., 201263, 1181-1187.
3.
BortelsL.ParlongueJ.FieltschW. and SegallS. M.: ‘Managing pipeline integrity by mitigating alternating current interference’Mater. Perform., 20104932–37.
4.
OrmelleseM.GoidanichS. and LazzariL.: ‘Effect of AC interference on cathodic protection monitoring’Corros. Eng. Sci. Technol., 201146618–623.
5.
XuL. Y.SuX.YinZ. X.TangY. H. and ChengY. F.: ‘Development of a real-time AC/DC data acquisition technique for studies of AC corrosion of pipelines’Corros. Sci., 201261215–223.
6.
XuL. Y.SuX. and ChengY. F.: ‘Effect of alternating current on cathodic protection on pipelines’Corros. Sci., 201366263–268.
7.
TribolletB. and MeyerM.: ‘AC-induced corrosion of underground pipelines’; 2014CambridgeWoodhead Publishing.
8.
YunovichM. and ThompsonN. G.: ‘AC corrosion: mechanism, proposed model’. Proc. Int. Pipeline Conf., Calgary, Alta, Canada, October 2004, ASME, Paper 0574.
9.
NielsenL. V.BaumgartenB. and CohnP.: ‘On-site measurements of AC induced corrosion: effect of AC and DC parameters’. Proc. CeoCor Int. Cong., Dresden, Germany, June 2004, Committee on the Study of Pipe Corrosion and Protection, 1-20..
10.
XiaoH. Y. and LalvaniS. B.: ‘A linear model of alternating voltage-induced corrosion’J. Electrochem. Soc., 2008155C69–C74.
11.
ZhangR.VairavanathanP. R. and LalvaniS. B.: ‘Perturbation method analysis of AC-induced corrosion’Corros. Sci., 200850, 1664-1671.
12.
NielsenL. V.RosenbergH. V.BaumgartenB.Breuning-MadsenH.CohnP. and NielsenK. V.: ‘AC induced corrosion in pipelines: detection, characterization and mitigation’. Proc. Conf. Corrosion 2004, New Orleans, LA, USA, May–April 2004, NACE International, Paper 04211.
13.
NielsenL. V.: ‘Role of alkalization in AC induced corrosion of pipelines and consequences hereof in relation to CP requirements’. Proc. Conf. Corrosion 2005, Houston, TX, USA, April 2005, NACE International, Paper 05188..
14.
FuA. Q. and ChengY. F.: ‘Effects of alternating current on corrosion of a coated pipeline steel in a chloride-containing carbonate/bicarbonate solution’Corros. Sci., 201052612–619.
15.
KuangD. and ChengY. F.: ‘Understand the AC induced pitting corrosion on pipelines in both high pH and neutral pH carbonate/bicarbonate solutions’Corros. Sci., 201485304–310.
16.
ZhuM.DuC. W.LiX. G.LiuZ. Y.WangS. R.LiJ. K. and ZhangD. W.: ‘Effect of AC current density on stress corrosion cracking behavior of X80 pipeline steel in high pH carbonate/bicarbonate solution’Electrochim. Acta2014117351–359.
17.
JiangZ. T.DuY. X.LuM. X.ZhangY. N.TangD. Z. and DongL.: ‘New findings on the factors accelerating AC corrosion of buried pipeline’Corros. Sci., 2014811–10.
18.
DaviesD. H. and BursteinG. T.: ‘Effects of bicarbonate on the corrosion and passivation of iron’Corrosion198036416–422.
19.
MacDougallB. R. and GrahaminM. J.: ‘Corrosion mechanisms in theory and practice’, (eds. MarcusP. and OudarJ.), 257–263; 1995New YorkMarcel Dekker.
20.
BockrisJ. O. M.ReddyA. K.: ‘Modern electrochemistry: an introduction to an interdisciplinary area’; 1970New YorkMacdonald & Co Ltd.
21.
KwiatkowskiL. and MansfeldF.: ‘Surface modification of stainless steel by an alternating voltage process’J. Electrochem. Soc., 1993140L39–L41.
22.
SongG. L.CaoC. N. and LinH. C.: ‘Effects of AC-modulated passivation and post-treatment on composition and stability of passive films’Corrosion199349271–277.
