Corrosion tests were performed with four different materials exposed at the furnace wall in a power boiler burning recycled wood, with the aim of evaluating coatings to reduce the corrosion. The nickel base Alloy 625 and the iron–chromium–aluminium alloy Kanthal APMT had the lowest corrosion rates followed by the stainless steel 310S. The low alloy steel 16Mo3, from which the walls are constructed, had the highest rate. Different corrosion mechanisms were found to occur according to the alloy type. Thermodynamic modelling showed that chlorine gas exists at extremely low levels under the prevailing conditions and the hydrated form is thermodynamically favoured.
AlipourYViklundP and HendersonP: ‘The analysis of furnace wall deposits in a low-NOx waste wood-fired bubbling fluidised bed boiler’VGB PowerTech.20121296–100.
2.
JermerJ.EkvallA. and TullinC., ‘Inventory of contaminations in waste wood’Report no. 732, Värmeforsk Sverige AB, Stockholm, Sweden2001.
3.
AntunesRA and L de OliveiraMC: ‘Corrosion in biomass combustión: a materials section analysis and its interaction with corrosion mechanisms and migitation strategies’Corros. Sci.2013766–26.
4.
StoresundJSundGPetterssonRNordlingM and HögbergJ: ‘Countermeasures to corrosion on waterwalls’Report no. 1023, Värmeforsk Sverige AB, Stockholm, Sweden2007.
5.
KawaharaY: ‘High temperature corrosion mechanisms and effect of alloying elements for materials used in waste incineration environment’Corros. Sci.200244223–245.
6.
ViklundP: ‘Superheater corrosion in biomass and waste fired boilers, KTH Royal Institute of Technology’PhD thesis, KTH Royal Institute of Technology, Stockholm, Sweden20131–10.
7.
ZahsASpiegelM and GrabkeHJ: ‘Chloridation and oxidation of iron, chromium, nickel and their alloys in chloridizing and oxidizing atmospheres at 400-700°C’Corros. Sci.200042, 1093-1122.
8.
ReeseE and GrabkeHJ: ‘Influβ von chloriden auf die oxidation des 2¼ Cr-1Mo-stahls’Werkst. Korros.199243547–557.
9.
SzakálosPHendersonP and PettersonR: ‘Mechanisms of chlorine induced corrosion and effect of sulphur additions in superheater corrosion in biomass- and waste fired boilers’Proc. 16th Int. Conf. on ‘Corrosion’, Beijing, China, September 2005, Chinese Society of Corrosion and Protection.
10.
IshitsukaT and NoseK: ‘Stability of protective oxide films in waste incineration environment – solubility measurement of oxides in molten chlorides’Corros. Sci.200244247–263.
11.
EnestamS: ‘Corrosivity of hot flue gases in the fluidized bed combustion of recovered waste wood’PhD thesis, Åbo Akademi, Åbo, Finland2011.
12.
PetterssonJAstemanHSvenssonJE and JohanssonL.-G: ‘KCl induced corrosion of a 304-type austenitic stainless steel at 600°C; the role of potassium’Oxid. Met.20056423–41.
13.
KarlssonSPetterssonJJohanssonL.-G and SvenssonJ.-E: ‘Alkali induced high temperature corrosion of stainless steel: the influence of NaCl, KCl and CaCl2’Oxid. Met.20127883–102.
GrabkeHJReeseE and SpiegelM: ‘The effects of chlorides, hydrogen chloride, and sulfur dioxide in the oxidation of steels below deposits’Corros. Sci.199537, 1023-1043.
16.
FolkesonNJohanssonL.-G and SvenssonJ.-E: ‘Initial stages of the HCl-induced high-temperature corrosion of alloy 310’J. Electrochem. Soc.2007154515–521.
17.
ViklundP and PetterssonR: ‘HCl-induced high temperature corrosion of stainless steels in thermal cycling conditions and the effect of preoxidation’Oxid. Met.201176111–126.
18.
ChangY.-N and WeiF.-I: ‘High temperature chlorine corrosion of metals and alloys’J. Mater. Sci.199126, 3693-3698.
19.
MontgomeryMKarlssonA and LarsenOH: ‘Field test corrosion experiment in Denmark with biomass fuels Part 2: Co-firing of straw and coal’Mater. Corros.200253121–131.
20.
HendersonPSzakálosPPetterssonRAnderssonC and HögbergJ: ‘Reducing superheater corrosion in wood-fired boilers’Mater. Corros.200657128–134.
21.
JönssonBLiuQChandrasekaranDBerglundR and RaveF: ‘Oxidation and creep limited lifetime of Kanthal APMT, a dispersion strengthened FeCrAlMo alloy designed for strength and oxidation resistance at high temperatures’Oxid. Met.20137929–39.
22.
WeisenburgerAJianuADoyleSBrunsMFetzerRHeinzelADelGiaccoM and MüllerWAG: ‘Oxide scales formed on Fe–Cr–Al-based model alloys exposed to oxygen containing molten lead’J. Nucl. Mater.2013437282–292.
23.
SvenssonJ.-EJohanssonL.-GHellströmKPettersssonJIsraelssonNJönssonBChandrasekaranD and NorlingR: ‘FeCrAl alloys for superheaters in biomass and waste fired boilers a feasibility study’Elforsk, Stockholm, Sweden2009.
24.
LaiGY: ‘Corrosion mechanisms and alloy performance in waste-to-energy boiler combustion environment’Proc. 12th Int. North American Waste To Energy Conf., Savannah, GA, USA, May 2004, ASME, Paper 221491–98.
25.
AmadorP and LaiG: ‘Application of unifuse overlay tubes in the convection section of waste-to-energy boilers’Proc. 11th Int. North American Waste To Energy Conf., Tampa, FL, USA, April 2003, ASME, Paper 1673, 73-81.
26.
AlbinaDO: ‘Theory and experience on corrosion of waterwall and superheater tubes of waste-to-energy facilities’PhD Thesis, Colombia University, New York, USA2005.
27.
PetterssonRFAStoresundJ and NordlingM: ‘Corrosion of overlay weld cladding in waterwalls of waste fired CFB boiler’Corros. Eng. Sci. Technol.200944218–225.
28.
StålenheimA and HendersonP: ‘Materials for higher steam temperatures (up to 600°C) in biomass and waste fired plant; A review of present knowledge’Report no. 1174, Värmeforsk Sverige AB, Stockholm, Sweden2011.
29.
ChatterjiDMcKeeDWRomeoG and SpacilHS: ‘The effect of lead on the hot corrosion of nickel-base alloys’J. ElectroChem. Soc.1975122941–952.
30.
AlipourYHendersonP and SzakálosP: ‘The effect of a nickel alloy coating on the corrosion of furnace wall tubes in a waste wood fired power plant’Mater. Corros.201465217–225.
