The corrosion of pure Ag, Cu, Ni, and Sn specimens exposed for 1 to 24 months in a simulated indoor environment, consisting of a rain sheltered atmospheric corrosion test chamber placed in an urban desert environment (Baja California) has been measured. The corrosion rates of the metals were determined by mass loss measurement and the environment was thus classified in the low to medium indoor corrosivity category (IC2–IC3) according to ISO. Silver and copper weight losses were found to be very similar, while the nickel and tin weight losses were several times lower. The silver surface was tarnished in a non-uniform manner, presenting Ag2S and AgCl corrosion products, while the copper specimens corrode uniformly, being covered with Cu2O corrosion product. Owing to the presence of chloride contamination, the nickel and tin oxide corrosion films show fracture and pitting corrosion, developed over the first few months of exposure.
TillminM.RobergeP. and TurorialR.: Trans. Rehab., 199544, (2), 271.
2.
BaboianR.: in ‘ Corrosion tests and standards’, (ed. BaboianR.), Chap. 70637–644; 1995PhiladelphiaPA, ASTM Publications.
3.
HenricksenJ.HienonenR. and Imre11T.: ‘ Corrosion of electronics’, Bulletinno. 102Swedish Corrosion InstituteStockholm, Sweden1991.
4.
FrankenthalR. P.: in ‘Uhlig's corrosion handbook’, (ed. WinstonR.), 2nd edn941–947; 2002New YorkJohn Wiley & Sons, Inc.
5.
WhiteE.SlenskiG. and DobbsB: in ‘ ASM metals handbook’ Vol. 13‘Corrosion’1113–1126; 1987Metal ParkOH, ASM International.
6.
‘Corrosion of electronic and magnetic materials’, (ed. PetersonPh. J.), ASTM STP 1148, ASTM PublicationsPhiladelphia, PA, USA1992.
7.
SinclairJ. D.: in ‘ Corrosion tests and standards’, (ed. BaboianR.), Chap. 29295–306; 1995PhiladelphiaPA, ASTM Publications.
8.
LeygrafC. and GraedelT: in ‘ Atmospheric corrosion’, Electrochemical Society Series109–127192–204319–327; 2000New YorkWiley Interscience.
9.
SharmaS. P.ThomasJ. H.III and BaderB.: J. Electrochem. Soc., 1978125, (12), 2002–2004.
10.
‘Corrosion of metals and alloys — classification of corrosivity of atmospheres’, ISO9223International Organization for Standardization, Geneva, Switzerland1992.
11.
‘Corrosion of metals and alloys — Classification of atmospheres with low corrosivity — Determination and estimation of corrosiv-ity’, ISO11844–1International Organization for Standardization, Geneva, Switzerland2000.
12.
‘Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Determination of corrosion attack’, IISO11844–2International Organization for Standardization, Geneva, Switzerland2003.
13.
‘Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Measurement of environmental para-meters affecting indoor corrosivity’, ISO11844–3International Organization for Standardization, Geneva, Switzerland2002.
14.
LopezB. G.ValdezS. B.ZlatevK. R.FloresP. J.CarrilloB. M. and SchorrW. M.: Anti-Corros. Methods Mater., 200754, (6), 354–359.
15.
VelevaL.PerezG. and AcostaM.: Atmos. Environ., 199731, (5), 773–776.
16.
VelevaL. and MaldonadoL.: Br. Corros. J., 199833, (1), 53–57.
17.
FloresJ. F.ValdezS. B. and SchorrM: Ingenierias2003VI, (21), 33.
18.
‘Practice for calibration of atmospheric corrosion test chambers by change in mass of copper coupons’, ASTM B 810, ASTM, PhiladelphiaPA, USA2001.
19.
‘Standard guide for mixed flowing gas (MFG) tests for electrical contacts’, ASTM B845–97ASTM International, West Conshohocken, PhiladelphiaPA, USA2003.
20.
‘Environmental conditions for process measurement and control systems’, ANSI/ISA- 5P71, Airborne Contaminants Instrument Society of AmericaResearch Triangle ParkNC, USA1997.
21.
SprolesE. S.Jrin ‘Corrosion of electronic and magnetic materials’, (ed. PetersonPh. J.), ASTM STP 1148, ASTM PublicationsPhiladelphia, PA, USA199211–20.
22.
TidbladJ. and KuceraV: in ‘ Corrosion attack on electric contact materials. Evaluation after 8 years of exposure’, Report no. 26, Swedish Corrosion Institute, Stockholm, Sweden1998.
23.
‘Corrosion of metals and alloys — Corrosivity of atmosphere — Measurements of pollution’, ISO 9225:92, International Organization for Standardization, GeneveSwitzerland1992.
24.
VelevaL.QuintanaP.RamanauskasR.PomésR. and MaldonadoL.: Electrochim. Acta199641, (10), 1641–1646.
25.
GraedelT. E.FraneyJ. P.GualtieriG. J.KammlottG. W. and MalmD. L.: Corros. Sci., 198525, (12), 1163–1180.
26.
SharmaS. P.: J. Electrochem. Soc., 1980127, (1), 21–26.
27.
ItohJ.SasakiT. and OhtsukaT.: Corros. Sci., 2000421539–1551.
28.
TidbladJ.AaastrupT. and LeygrafC.: J. Electrochem. Soc., 2005152, (5), B178—B185.
29.
CanoE.BastidasJ. M.PoloJ. L. and MoraN.: J. Electrochem. Soc., 2001148, (11), B431—B437.
30.
MendozaA. and CorvoF.: Corros. Sci., 200042, (7), 1123–1147.
31.
GrahamM. J. and CohenM.: J. Electrochem. Soc., 1972119, (7), 879–882.
32.
KulpaS. H. and P:R.P.J. Electrochem. Soc., 124, (10), 1588-1592.
33.
SasakiT.KanagawaR. and OhtsukaK. M.: Corros. Sci., 200345847–854.
