Experimental studies on dependence of surface temperatures of exposed metal plates on environmental parameters

Abstract

The present study reports on an investigation into the dependence of the surface temperature of metal plates on environmental parameters. Monitored plates were exposed at three locations (one coastal and two inland) in southern Australia. The following parameters were monitored: surface temperature, surface wetness, wind speed, ambient relative humidity, air temperature and lifting condensation level. (The lifting condensation level is the height at which a parcel of air rising from the ground will reach saturation.) An analysis was undertaken of the temperature difference between the exposed plate surfaces and ambient air. It was found that the maximum temperature difference during the day depended on season, wind speed and, to a lesser extent, the lifting condensation level. The maximum undercooling during the night showed a relatively limited range and a weak dependence on wind speed. The rate of rise in temperature difference after sunrise was found to be only slightly dependent on season, but highly dependent on whether the surface was wet or dry. If the surface was dry, the rise in temperature difference depended on the wind speed and lifting condensation level. The relevance of these findings to moisture formation and evaporation from surfaces, and thus to corrosion processes, is discussed.