Corrosion and passivation in nanoscopic and microscopic dimensions: The influence of grains and grain boundaries

Abstract

In technical applications of polycrystalline metals, the grain structure and role of grain boundaries are of great importance. Electron back scattering diffraction (EBSD) identifies the surface orientation of grains. In combination with microelectrochemical techniques, single crystal experiments can be carried out on polycrystalline metals. Application of AFM (atomic force microscopy), LFM (lateral force microscopy) and dF/ds (force microscopy) can provide complementary information in the nanometre range, e.g. on grain boundaries. As an example, the etching and passivation of Ti (hcp) has been investigated. First, a variety of technical samples from different companies were analysed with respect to grain size, orientation, and twins formation. AFM showed different roughnesses on grains (e.g. (0001) >(xxx0)), while dF/ds demonstrated the greater hardness of films on (0001) compared with (xxx0). Grain boundaries between grains of the same and different orientations must be distinguished. In iron the topography of grain boundaries (steps, hills, trenches) shows a clear dependence on the polishing procedure and on the orientation of neighbouring grains. (100) orientated grains always show the fastest metal removal during both chemical and electrochemical polishing. These effects can be correlated with different surface packing densities of the relevant crystal faces.

Keywords

EBSD AFM MICROELECTROCHEMISTRY GRAIN ORIENTATION GRAIN BOUNDARIES POLISHING TITANIUM IRON

Get full access to this article

View all access options for this article.

References

SCHULTZE

J. W.

and LOHRENGEL

M. M.

: Electrochim. Acta 2000 45 2499–2513.

SCHULTZE

J. W.

and HASSEL

A. W.

: in ‘Encyclopedia of electrochemistry’, (ed. Bard and Stratmann ), Vol. 4 ‘Corrosion and oxide films’, (ed. Stratmann and Frankel ), 216; 2003 Wiley-VCH.

BUTLER

A. M.

: J. Electrochem. Soc., 1984 130 2185.

GARFIAS-MESIAS

L. F.

and SMYRL

W. H.

: Electrochim Acta 1999 44 3651.

KUDELKA

and SCHULTZE

J. W.

: Electrochirn. Acta 1997 42 2817.

KONIG

and DAVEPON

: Electrochirn. Acta 47 149–160.

VILLECHAISE

SABATIER

and GIRARD

J. C.

: Mater. Scl Eng., 2002 A323 377–385.

SCHULTZE

J. W.

MtILLER

KONIG

and KRUMM

: in ‘Critical factors in localized corrosion III’ 31–41; 1998

Pennington

NJ, The Electrochem. Soc.

SCHULTZE

J. W.

PILASKI

LOHRENGEL

M. M.

and KONIG

: Faraday Discussions 2002 121 211.

10.

DAVEPON

: Dissertation HHU-Diisseldorf 2001.

11.

KUDELKA

MICHAELIS

and SCHULTZE

J. W.

: Electrochirnica Acta 1996 41 863.

12.

SCHULTZE

J. W.

PILASKI

LOHRENGEL

M. M.

and KöNIG

: Faraday Discussions 2002 1 211–227.

13.

DINGLEY

D. J.

and RANDLE

: J. Mater. Sci., 1992 27 4545–4566.

14.

KONIG

and DAVEPON

: Electrochirn. Acta 2001 47 149–160.

15.

VOIGT

: Dissertation HHU-Düsseldorf 2003.

16.

VOIGT

and SCHULTZE

J. W.

: ‘AFM measurements on topography and hardness on grains and grain boundaries of oxide covered titanium’, in preparation.

17.

RAUSCH

: Die Phosphatierung von Metallen

Leuze Verlag, Saulgau

1988 (German).

18.

NEUHAUS

and GEBHARDT

: Werkstoffe Korrosion 1966, 17, 7.

19.

WILLER

KRUMM

KONIG

and SCHULTZE

J. W.

: ‘Mikroanalytische und rastersondenmikroskopische Untersuchungen zur Phosphatierung’ GDCh-Monogr. Elektrochemische Reaktionstechnik und Synthese14 (1999) 417 (German).